tinyos.txt

tinyOS(1.x)contrib hsu pic18f4620 .platform

[Tinyos-contrib-commits] CVS: tinyos-1.x/contrib/hsu/pic18f4620 .platform, NONE, 1.1 chksum.h, NONE, 1.1 Clock.h, NONE, 1.1 Clock.nc, NONE, 1.1 convert_pic.pl, NONE, 1.1 crc.h, NONE, 1.1 crc8.h, NONE, 1.1 GenericComm.nc, NONE, 1.1 hardware.h, NONE, 1.1 HPLADCC.nc, NONE, 1.1 HPLADCM.nc, NONE, 1.1 HPLInitC.nc, NONE, 1.1 HPLInitM.nc, NONE, 1.1 HPLPowerManagementM.nc, NONE, 1.1 HPLUARTC.nc, NONE, 1.1 HPLUARTM.nc, NONE, 1.1 Main.nc, NONE, 1.1 MainM.nc, NONE, 1.1 pic18f4620_defs.h, NONE, 1.1 PIC18F4620ClockC.nc, NONE, 1.1 pic18f4620hardware.h, NONE, 1.1 PIC18F4620HPLClock.nc, NONE, 1.1 PIC18F4620Interrupt.nc, NONE, 1.1 PIC18F4620InterruptC.nc, NONE, 1.1 PIC18F4620InterruptM.nc, NONE, 1.1 PIC18F4620TimerC.nc, NONE, 1.1 PIC18F4620TimerM.nc, NONE, 1.1 README_CompileInstructions.txt, NONE, 1.1 timers.h, NONE, 1.1
Hans-Joerg Koerber hjkoerber at users.sourceforge.net 
Fri Apr 15 03:00:10 PDT 2005 

Previous message: [Tinyos-contrib-commits] CVS: tinyos-1.x/contrib/nucleus/tos/lib/NucleusExamples MSP430InterruptCounterC.nc, NONE, 1.1 MSP430InterruptCounterM.nc, NONE, 1.1 
Next message: [Tinyos-contrib-commits] CVS: tinyos-1.x/contrib/hsu/apps/PIC18F4620_OscilloscopeRF - New directory 
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] 

--------------------------------------------------------------------------------

Update of /cvsroot/tinyos/tinyos-1.x/contrib/hsu/pic18f4620
In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv15558

Added Files:
	.platform chksum.h Clock.h Clock.nc convert_pic.pl crc.h 
	crc8.h GenericComm.nc hardware.h HPLADCC.nc HPLADCM.nc 
	HPLInitC.nc HPLInitM.nc HPLPowerManagementM.nc HPLUARTC.nc 
	HPLUARTM.nc Main.nc MainM.nc pic18f4620_defs.h 
	PIC18F4620ClockC.nc pic18f4620hardware.h PIC18F4620HPLClock.nc 
	PIC18F4620Interrupt.nc PIC18F4620InterruptC.nc 
	PIC18F4620InterruptM.nc PIC18F4620TimerC.nc 
	PIC18F4620TimerM.nc README_CompileInstructions.txt timers.h 
Log Message:
initial commit

--- NEW FILE: .platform ---
@opts = ("-gcc=avr-gcc",
	 "-mmcu=atmega128",
	 "-fnesc-target=avr",
	 "-fnesc-no-debug");

push @opts, "-mingw-gcc" if $cygwin;

@commonplatforms = ("mica128", "mica", "avrmote");

--- NEW FILE: chksum.h ---
// $Id: chksum.h,v 1.1 2005/04/15 10:00:06 hjkoerber Exp $

/* 
 * Copyright (c) Helmut-Schmidt-University, Hamburg
 *		 Dpt.of Electrical Measurement Engineering  
 *		 All rights reserved
 *
 * Redistribution and use in source and binary forms, with or without 
 * modification, are permitted provided that the following conditions 
 * are met:
 * - Redistributions of source code must retain the above copyright notice,
 *   this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright 
 *   notice, this list of conditions and the following disclaimer in the 
 *   documentation and/or other materials provided with the distribution.
 * - Neither the name of the Helmut-Schmidt-University nor the names 
 *   of its contributors may be used to endorse or promote products derived
 *   from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED 
 * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY 
 * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 
 * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/* 
 * @author Housam Wattar 
 *         <wattar at hsu-hh.de>
 *	   ([phone]/2627 
 *
 * $Date: 2005/04/15 10:00:06 $
 * $Revision: 1.1 $
 * 
 */


uint8_t chksum(uint8_t *ptrMsg, uint8_t length)
{
	unsigned char data;
	
	data=0;
	while(length--)data += *ptrMsg++;
	
	return (data);
}


						

--- NEW FILE: Clock.h ---
// $Id: Clock.h,v 1.1 2005/04/15 10:00:07 hjkoerber Exp $

/*								
 * "Copyright (c) 2000-2003 The Regents of the University  of California.  
 * All rights reserved.
 *
 * Permission to use, copy, modify, and distribute this software and its
 * documentation for any purpose, without fee, and without written agreement is
 * hereby granted, provided that the above copyright notice, the following
 * two paragraphs and the author appear in all copies of this software.
 * 
 * IN NO EVENT SHALL THE UNIVERSITY OF CALIFORNIA BE LIABLE TO ANY PARTY FOR
 * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
 * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF THE UNIVERSITY OF
 * CALIFORNIA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * 
 * THE UNIVERSITY OF CALIFORNIA SPECIFICALLY DISCLAIMS ANY WARRANTIES,
 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
 * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
 * ON AN "AS IS" BASIS, AND THE UNIVERSITY OF CALIFORNIA HAS NO OBLIGATION TO
 * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS."
 *
 * Copyright (c) 2002-2003 Intel Corporation
 * All rights reserved.
 *
 * This file is distributed under the terms in the attached INTEL-LICENSE     
 * file. If you do not find these files, copies can be found by writing to
 * Intel Research Berkeley, 2150 Shattuck Avenue, Suite 1300, Berkeley, CA, 
 * 94704.  Attention:  Intel License Inquiry.
 */

/* @author  Cory Sharp
 * @author  Hans-Joerg Koerber 
 *          <hj.koerber at hsu-hh.de>
 *	    ([phone]/2627
 *
 * $Date: 2005/04/15 10:00:07 $
 * $Revision: 1.1 $ 
 *
 */


enum {
  DEFAULT_SCALE=0, DEFAULT_INTERVAL=0xffff
};


--- NEW FILE: Clock.nc ---
// $Id: Clock.nc,v 1.1 2005/04/15 10:00:07 hjkoerber Exp $

/*									
 * "Copyright (c) 2000-2003 The Regents of the University  of California.  
 * All rights reserved.
 *
 * Permission to use, copy, modify, and distribute this software and its
 * documentation for any purpose, without fee, and without written agreement is
 * hereby granted, provided that the above copyright notice, the following
 * two paragraphs and the author appear in all copies of this software.
 * 
 * IN NO EVENT SHALL THE UNIVERSITY OF CALIFORNIA BE LIABLE TO ANY PARTY FOR
 * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
 * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF THE UNIVERSITY OF
 * CALIFORNIA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * 
 * THE UNIVERSITY OF CALIFORNIA SPECIFICALLY DISCLAIMS ANY WARRANTIES,
 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
 * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
 * ON AN "AS IS" BASIS, AND THE UNIVERSITY OF CALIFORNIA HAS NO OBLIGATION TO
 * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS."
 *
 * Copyright (c) 2002-2003 Intel Corporation
 * All rights reserved.
 *
 * This file is distributed under the terms in the attached INTEL-LICENSE     
 * file. If you do not find these files, copies can be found by writing to
 * Intel Research Berkeley, 2150 Shattuck Avenue, Suite 1300, Berkeley, CA, 
 * 94704.  Attention:  Intel License Inquiry.
 */

/*
 * The hardware clock interface. 
 * @author Jason Hill
 * @author David Gay
 * @author Philip Levis
 * @author Nelson Lee
 * @author Hans-Joerg Koerber 
 *         <hj.koerber at hsu-hh.de>
 *	   ([phone]/2627
 
 * $Date: 2005/04/15 10:00:07 $
 * $Revision: 1.1 $
 *
 */


includes Clock;
includes timers;

interface Clock {


  async command result_t setRate(uint16_t interval, uint8_t scale);

  /**
   *  Set clock interval 
   * 
   *  @param value New clock interval
   *
   *  @return none
   **/
  async command void setInterval(uint16_t value);

  /**
   *  Set clock interval at next clock interrupt time
   * 
   *  @param value New clock interval
   *
   *  @return none
   **/
  async command void setNextInterval(uint16_t value);

  /**
   *  Get clock interval 
   * 
   *  @return current clock interval
   **/
  async command uint16_t getInterval();

  /**
   *  Get clock scale 
   * 
   *  @return current clock scale level
   **/  
  async command uint8_t getScale();

  /**
   *  Set clock scale at next clock interrupt time 
   * 
   *  @param scale New clock scale
   *
   *  @return none
   **/
  async command void setNextScale(uint8_t scale);

  /**
   *  Set both clock interval and scale
   * 
   *  @param interval New clock interval
   *
   *  @param scale New clock scale
   *
   *  @return SUCCESS or FAILED 
   **/
  async command result_t setIntervalAndScale(uint16_t interval, uint8_t scale);

  /**
   *  Read HW clock counter
   */
  async command uint16_t readCounter() ;

  /**
   *  Set HW clock counter to a specified value
   *
   *  @param n Value to write to TMR1
   *
   *  @return None
   */
  async command void setCounter(uint16_t n);


  /**
   *  Disable Clock interrupt
   */
  async command void intDisable();


  /**
   *  Enable Clock interrupt
   */
  async command void intEnable() ;


  /**
   *  An event sent when the clock goes off.
   **/
  async event result_t fire();
}











--- NEW FILE: convert_pic.pl ---
#!/usr/bin/perl

# $Id: convert_pic.pl,v 1.1 2005/04/15 10:00:07 hjkoerber Exp $

#
# Copyright (c) Helmut-Schmidt-University, Hamburg
#		 Dpt.of Electrical Measurement Engineering  
#		 All rights reserved
#
# Redistribution and use in source and binary forms, with or without 
#  modification, are permitted provided that the following conditions 
# are met:
# - Redistributions of source code must retain the above copyright notice,
#   this list of conditions and the following disclaimer.
# - Redistributions in binary form must reproduce the above copyright 
#   notice, this list of conditions and the following disclaimer in the 
#   documentation and/or other materials provided with the distribution.
# - Neither the name of the Helmut-Schmidt-University nor the names 
#   of its contributors may be used to endorse or promote products derived
#   from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED  
# TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
# OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY 
# OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE 
# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#/

# @author Hans-Joerg Koerber 
#         <hj.koerber at hsu-hh.de>
#	  ([phone]/2627
# 
# $Date: 2005/04/15 10:00:07 $
# $Revision: 1.1 $
#


#-------------------------------------------------------------------------------------------------------------#       
#
#  This script will take the C file produced by nesC and 
#  make it compatible with the Microchip C18-Compiler
#                        
#-------------------------------------------------------------------------------------------------------------#


#-------------------------------------------------------------------------------------------------------------#       
#
# Command line paramters used when invoking the script
# 
#         First parameter  = source name  (app.c)
#         Second parameter = output name (app_pic.c) 
#                        
#-------------------------------------------------------------------------------------------------------------#


$source = $ARGV[0];
$output = $ARGV[1];

if ($source eq $output) {
	die("perl: source and output cannot be the same");