svc2kxp.cmd

经典批处理代码

                echo  Note:
                echo  -----
                echo  If you experiencing problems after updating Windows XP with
                echo  Service Pack 2 please do following:
                echo.
                echo                          set Deactivate_NetBIOS=NO
                echo.
                )
  rem *** Thx2 Johannes Lichtenberger for the following lines using VBScript***
  echo  Disable NetBios on all local interfaces ...
  echo.
  echo On Error Resume Next>> "%nb_tmp%"
  echo.>> "%nb_tmp%"
  echo TcpipoverNetbios = 2 '0=NetbiosfromDHCP 1=EnableNetbios 2=DisableNetbios>> "%nb_tmp%"
  echo.>> "%nb_tmp%"
  echo strComputer = ".">> "%nb_tmp%"
  echo Set objWMIService = GetObject("winmgmts:\\" ^& strComputer ^& "\root\cimv2")>> "%nb_tmp%"
  echo Set objNICs = objWMIService.ExecQuery _>> "%nb_tmp%"
  echo    ("Select * From Win32_NetworkAdapterConfiguration Where IPEnabled = True")>> "%nb_tmp%"
  echo For Each objNic In objNICs>> "%nb_tmp%"
  echo    errTcpipNetbios = objNic.SetTCPIPNetBIOS(TcpipoverNetbios)>> "%nb_tmp%"
  echo Next>> "%nb_tmp%"
  "%SYSTEMROOT%\SYSTEM32\CSCRIPT.EXE" "%nb_tmp%"
  del /F /Q "%nb_tmp%"
  set REBOOT_REQUIRED=yes

:SKIP_NB_DISABLE
rem Skip Billboard because /all is used
if /I %SELECT%=="/all" goto :SW_ALL
if /I %SELECT%=="/std" goto :SW_ALL
if /I %SELECT%=="/relan" goto :SW_ALL
echo.
echo  ___________________________________________________________________
echo.
echo                   *** Zusammenfassung / Result ***
echo.
echo  Es wurden NICHT alle Aenderungen umgesetzt!
echo  Um alle Vorschlaege von kssysteme.de umzusetzen, verwenden Sie
echo  bitte den Parameter '/all' oder waehlen Sie im Menue den Punkt "3".
if /I %DHCP_CHANGES%=="YES" (
         	echo.
	  	echo  Wichtiger DHCP Hinweis
	  	echo  ======================
	  	echo  Ihre Konfiguration deutete an, das kein DHCP benoetigt wird. Falls
          	echo  Sie jedoch einen DSL-Internetzugang besitzen und DHCP irrtuemlich 
	  	echo  deaktivert wurde, kann es nach einem Neustart zu Problemen mit der 
	  	echo  Internetverbindung kommen. Starten sie zur Problembehebung den 
	  	echo  DHCP-Dienst von Hand neu.
	  	echo.
		)

echo.
echo  Not all changes could be performed. To change all issues listed
echo  on www.ntsvcfg.de please use parameter '/all' or select item "3"!
if /I %DHCP_CHANGES%=="YES" (
         	echo.
	  	echo  Important DHCP Notice
	  	echo  =====================
	  	echo  Your configuration indicates that DHCP will no longer be required.
	  	echo  But if you are using a DSL internet connection this choice probably 
          	echo  might be wrong. If you experiences problems during accessing the 
	  	echo  internet please re-activate the "DHCP Service" manually.
		echo.
		)
echo  ___________________________________________________________________

:SW_ALL

if /I %SELECT%=="/relan" (
        rem startup: auto
        echo.
        echo  ------------------
        echo  Re-enabling services ...
        "%sc%" config LmHosts  start= auto
        "%sc%" config RemoteRegistry start= auto
        "%sc%" config SamSs start= auto
        "%sc%" config Winmgmt start= auto
        if /I "%SYSTEM%"=="2k" (
                "%sc%" config RPCSs start= auto
                "%sc%" config lanmanServer start= auto
                "%sc%" config seclogon start= auto
                )
        if /I "%SYSTEM%"=="XP" (
                rem "%sc%" config SharedAccess start= auto
                )


        rem start re-enabled services
        echo.
        echo  ------------------
        echo  [Re]starting services ...
        echo.

        "%sc%" query RemoteRegistry | "%find%"  /i "1  STOPPED" >NUL
        if not errorlevel 1 "%net%" start RemoteRegistry
        "%sc%" query SamSs | "%find%"  /i "1  STOPPED" >NUL
        if not errorlevel 1 "%net%" start SamSs
        "%sc%" query LmHosts | "%find%"  /i "1  STOPPED" >NUL
        if not errorlevel 1 "%net%" start LmHosts
        "%sc%" query Winmgmt | "%find%"  /i "1  STOPPED" >NUL
        if not errorlevel 1 "%net%" start Winmgmt
        if /I "%SYSTEM%"=="2k" (
                "%sc%" query LanmanServer | "%find%"  /i "1  STOPPED" >NUL
                if not errorlevel 1 "%net%" start lanmanServer
                "%sc%" query RPCSs | "%find%"  /i "1  STOPPED" >NUL
                if not errorlevel 1 "%net%" start RPCSs
                "%sc%" query Seclogon | "%find%"  /i "1  STOPPED" >NUL
                if not errorlevel 1 "%net%" start seclogon
                )

        if /I "%SYSTEM%"=="XP" (
                rem "%net%" start SharedAccess
                )

        rem enable SMB port 445
        echo.
        echo  ------------------
        echo  Enabling SMB port 445 ...
        echo REGEDIT4 > "%SMB_TMP%"
        echo. >> "%SMB_TMP%"
        echo [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters] >> "%SMB_TMP%"
        echo "SMBDeviceEnabled"=dword:00000001 >> "%SMB_TMP%"
        echo. >> "%SMB_TMP%"
        echo. >> "%SMB_TMP%"
        "%regedit%" /s "%SMB_TMP%"
        del /F /Q "%SMB_TMP%"
        set REBOOT_REQUIRED=yes
        )


rem Creating fingerprint of current service settings...
if exist "%FPRINT%" del /F /Q "%FPRINT%"
if /I %USE_FPRINT%==YES (
        echo.
        echo  Creating fingerprint which will take a few seconds ...
        "%sc%" query type= service state= all bufsize= 8192 | %FIND% "SERVICE_NAME" > %TEMP%\~svclist.txt
        for /F "tokens=1*" %%a in (%TEMP%\~svclist.txt) do (
                echo %%b >>"%FPRINT%"
                "%sc%" query "%%b" | %FIND% "STATE" >>"%FPRINT%"
                "%sc%" qc "%%b" | %FIND% "DISPLAY_NAME" >>"%FPRINT%"
                "%SC%" qc "%%b" | %FIND% "START_TYPE" >>"%FPRINT%"
                echo. >> "%FPRINT%"
                )
        del "%TEMP%\~svclist.txt"
        echo                                                      ... done.
        )
goto :END


:RESTORE
echo  ____________________________________________________
echo.
echo  Letzte Aenderungen zuruecknehmen [y/n]?
set /P UNDO= Undo last changes [y/n]?
if /I "%UNDO%"=="y" (
        echo  _______________________________________________________________
        echo.
        echo  Hinweis:
        echo  ========
        echo  Moeglicherweise meldet Windows Fehler beim Importieren.
        echo  Ignorieren Sie diese mit Klick auf "OK".
        echo.
        echo  Windows might probably report an error during importing the
        echo  backups. Just ignore this by clicking the "OK" button!
        echo  _______________________________________________________________
        echo  Status:
        echo  -------
        :RESTORE_EXT
        if exist "%SVC_BAK%" (
                echo     Importing services ...
                echo        ["%SVC_BAK%"]
                "%regedit%" /s "%SVC_BAK%"
                set action=""
                )

        if exist "%DCOM_BAK%" (
                echo     Importing DCOM ...
                echo        ["%DCOM_BAK%"]
                "%regedit%" /s "%DCOM_BAK%"
                )

        if exist "%DCOMP_BAK%" (
                echo     Importing DCOM-standard protocols ...
                echo        ["%DCOMP_BAK%"]
                "%regedit%" /s "%DCOMP_BAK%"
                )

        if exist "%SMB_BAK%" (
                echo     Importing SMB-settings ...
                echo        ["%SMB_BAK%"]
        	echo   - Removing SMBDeviceEnabled RegKey ...
		echo REGEDIT4 > "%USERPROFILE%\smbpatch~.reg"
		echo. >> "%USERPROFILE%\smbpatch~.reg"
		echo [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters] >> "%USERPROFILE%\smbpatch~.reg"
		echo "SMBDeviceEnabled"=- >> "%USERPROFILE%\smbpatch~.reg"
		echo. >> "%USERPROFILE%\smbpatch~.reg"
		echo. >> "%USERPROFILE%\smbpatch~.reg"
		"%SystemRoot%\regedit.exe" /s "%USERPROFILE%\smbpatch~.reg"
		del /F /Q "%USERPROFILE%\smbpatch~.reg"
                "%regedit%" /s "%SMB_BAK%"
                )

        if exist "%HANDLER1%" (
                echo     Importing URL_HANDLER AIM ...
                echo        ["%HANDLER1%"]
                "%regedit%" /s "%HANDLER1%"
                )

        if exist "%HANDLER2%" (
                echo     Importing URL_HANDLER GOPHER ...
                echo        ["%HANDLER2%"]
                "%regedit%" /s "%HANDLER2%"
                )

        if exist "%HANDLER3%" (
                echo     Importing URL_HANDLER TELNET ...
                echo        ["%HANDLER3%"]
                "%regedit%" /s "%HANDLER3%"
                )

        rem Skipping back to next state
        if /I "%RESTORE%"=="YES" goto :NO_RESTORE

        echo     Removing RPC Internet key ....
        echo REGEDIT4 >"%USERPROFILE%\svc_fix.reg"
        echo. >>"%USERPROFILE%\svc_fix.reg"
        echo [-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Rpc\Internet] >>"%USERPROFILE%\svc_fix.reg"
        echo. >>"%USERPROFILE%\svc_fix.reg"
        echo. >>"%USERPROFILE%\svc_fix.reg"
        "%regedit%" /s "%USERPROFILE%\svc_fix.reg"
        del /F /Q "%USERPROFILE%\svc_fix.reg"

        rem Creating fingerprint of current service settings...
        if exist "%FPRINT%" del /F /Q "%FPRINT%"
        if /I %USE_FPRINT%==YES (
                echo.
                echo  Creating fingerprint which will take a few seconds ...
                "%sc%" query type= service state= all bufsize= 8192 | %FIND% "SERVICE_NAME" > %TEMP%\~svclist.txt
                for /F "tokens=1*" %%a in (%TEMP%\~svclist.txt) do (
                        echo %%b >>"%FPRINT%"
                        "%sc%" query "%%b" | %FIND% "STATE" >>"%FPRINT%"
                        "%sc%" qc "%%b" | %FIND% "DISPLAY_NAME" >>"%FPRINT%"
                        "%SC%" qc "%%b" | %FIND% "START_TYPE" >>"%FPRINT%"
                        echo. >> "%FPRINT%"
                        )
                del "%TEMP%\~svclist.txt"
                echo                                                      ... done.
                )

        echo.
        echo  _______________________________________________________________
        echo.
        echo               *** Zusammenfassung / Result ***
        echo.
        echo  Die Ruecksicherung wurde ausgefuehrt. Wenn in der oberen Zeile
        echo  keine Statusmeldungen zu sehen sind, existierten keine rueckzu-
        echo  sichernden Dateien. Aktivieren Sie gegebenenfalls NetBios in
        echo  den Eigenschaften der jeweiligen Netzwerkkarte.
        echo  Bitte starten Sie abschliessend Ihren Rechner neu.
        echo.
        echo  Restore finished. If you don't see any messages in the status
        echo  box above, there were no files to restore. Please reactivate
        echo  NetBios for each NIC you want use with it and reboot afterwards.
        echo  ________________________________________________________________
        )

goto :END

:RESTORE_DEFAULTS
echo.
echo                     *** Restore Factory Settings ***
echo.
echo  ______________________________________________________________________________
echo.
echo  Einstellungen vor Erstanwendung des Scripts wiederherstellen (ausser NetBIOS)?
set /P UNDO= Restore defaults (before using script, except NetBIOS) [y/n]?
if /I "%UNDO%"=="y" (
        echo.
        echo   - Restoring original service settings [if exists] ...

        if exist "%SVC_BAK%.default" 	(
					echo      "%SVC_BAK%.default"
					"%regedit%" /s "%SVC_BAK%.default"
					)
        if exist "%DCOM_BAK%.default" 	(
					echo      "%DCOM_BAK%.default"
					"%regedit%" /s "%DCOM_BAK%.default"
					)
        if exist "%DCOMP_BAK%.default" 	(
					echo      "%DCOMP_BAK%.default"
					"%regedit%" /s "%DCOMP_BAK%.default"
					)
        if exist "%SMB_BAK%.default"	(
					echo      "%SMB_BAK%.default"
        				echo   - Removing SMBDeviceEnabled RegKey ...
					echo REGEDIT4 > "%USERPROFILE%\smbpatch~.reg"
					echo. >> "%USERPROFILE%\smbpatch~.reg"
					echo [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters] >> "%USERPROFILE%\smbpatch~.reg"
					echo "SMBDeviceEnabled"=- >> "%USERPROFILE%\smbpatch~.reg"
					echo. >> "%USERPROFILE%\smbpatch~.reg"
					echo. >> "%USERPROFILE%\smbpatch~.reg"
					"%SystemRoot%\regedit.exe" /s "%USERPROFILE%\smbpatch~.reg"
					del /F /Q "%USERPROFILE%\smbpatch~.reg"
					"%regedit%" /s "%SMB_BAK%.default"
					)
        if exist "%HANDLER1%.default" 	(
					echo      "%HANDLER1%.default"
					"%regedit%" /s "%HANDLER1%.default"
					)
        if exist "%HANDLER2%.default" 	(
					echo 	  "%HANDLER2%.default"
					"%regedit%" /s "%HANDLER2%.default"
					)
        if exist "%HANDLER3%.default" 	(
					echo "%HANDLER3%.default"
					"%regedit%" /s "%HANDLER3%.default"
					)
        echo                                                 ... done.

        echo   - Removing RPC Internet key ...
        echo REGEDIT4 >"%USERPROFILE%\svc_fix.reg"
        echo. >>"%USERPROFILE%\svc_fix.reg"
        echo [-HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Rpc\Internet] >>"%USERPROFILE%\svc_fix.reg"
        echo. >>"%USERPROFILE%\svc_fix.reg"
        echo. >>"%USERPROFILE%\svc_fix.reg"
        "%regedit%" /s "%USERPROFILE%\svc_fix.reg"
        del /F /Q "%USERPROFILE%\svc_fix.reg"
        echo                                                 ... done.