sgint23.h

移植到2410开发板上的源代码

/*
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * sgint23.h: Defines for the SGI INT2 and INT3 chipsets.
 *
 * Copyright (C) 1996 David S. Miller ([e-mail])
 * Copyright (C) 1997, 98, 1999, 2000 Ralf Baechle
 * Copyright (C) 1999 Andrew R. Baker ([e-mail]) - INT2 corrections
 */
#ifndef _ASM_SGI_SGINT23_H
#define _ASM_SGI_SGINT23_H

/* These are the virtual IRQ numbers, we divide all IRQ's into
 * 'spaces', the 'space' determines where and how to enable/disable
 * that particular IRQ on an SGI machine.  Add new 'spaces' as new
 * IRQ hardware is supported.
 */
#define SGINT_LOCAL0   0   /* INDY has 8 local0 irq levels */
#define SGINT_LOCAL1   8   /* INDY has 8 local1 irq levels */
#define SGINT_LOCAL2   16  /* INDY has 8 local2 vectored irq levels */
#define SGINT_LOCAL3   24  /* INDY has 8 local3 vectored irq levels */
#define SGINT_GIO      32  /* INDY has 9 GIO irq levels */
#define SGINT_HPCDMA   41  /* INDY has 11 HPCDMA irq _sources_ */
#define SGINT_END      52  /* End of 'spaces' */

/*
 * Individual interrupt definitions for the INDY and Indigo2
 */

#define SGI_WD93_0_IRQ	SGINT_LOCAL0 + 1	/* 1st onboard WD93 */
#define SGI_WD93_1_IRQ	SGINT_LOCAL0 + 2	/* 2nd onboard WD93 */
#define SGI_ENET_IRQ	SGINT_LOCAL0 + 3	/* onboard ethernet */

#define SGI_PANEL_IRQ	SGINT_LOCAL1 + 1	/* front panel */

#define SGI_EISA_IRQ	SGINT_LOCAL2 + 3	/* EISA interrupts */
#define SGI_KEYBOARD_IRQ	SGINT_LOCAL2 + 4	/* keyboard */
#define SGI_SERIAL_IRQ	SGINT_LOCAL2 + 5	/* onboard serial */

/* INT2 occupies HPC PBUS slot 4, INT3 uses slot 6. */
#define SGI_INT2_BASE 0x1fbd9000 /* physical */
#define SGI_INT3_BASE 0x1fbd9880 /* physical */

struct sgi_ioc_ints {
#ifdef __MIPSEB__
	unsigned char _unused0[3];
	volatile unsigned char istat0;    /* Interrupt status zero */
#else
	volatile unsigned char istat0;    /* Interrupt status zero */
	unsigned char _unused0[3];
#endif
#define ISTAT0_FFULL           0x01
#define ISTAT0_SCSI0           0x02
#define ISTAT0_SCSI1           0x04
#define ISTAT0_ENET            0x08
#define ISTAT0_GFXDMA          0x10
#define ISTAT0_LPR             0x20
#define ISTAT0_HPC2            0x40
#define ISTAT0_LIO2            0x80

#ifdef __MIPSEB__
	unsigned char _unused1[3];
	volatile unsigned char imask0;    /* Interrupt mask zero */
	unsigned char _unused2[3];
	volatile unsigned char istat1;    /* Interrupt status one */
#else
	volatile unsigned char imask0;    /* Interrupt mask zero */
	unsigned char _unused1[3];
	volatile unsigned char istat1;    /* Interrupt status one */
	unsigned char _unused2[3];
#endif
#define ISTAT1_ISDNI           0x01
#define ISTAT1_PWR             0x02
#define ISTAT1_ISDNH           0x04
#define ISTAT1_LIO3            0x08
#define ISTAT1_HPC3            0x10
#define ISTAT1_AFAIL           0x20
#define ISTAT1_VIDEO           0x40
#define ISTAT1_GIO2            0x80

#ifdef __MIPSEB__
	unsigned char _unused3[3];
	volatile unsigned char imask1;    /* Interrupt mask one */
	unsigned char _unused4[3];
	volatile unsigned char vmeistat;  /* VME interrupt status */
	unsigned char _unused5[3];
	volatile unsigned char cmeimask0; /* VME interrupt mask zero */
	unsigned char _unused6[3];
	volatile unsigned char cmeimask1; /* VME interrupt mask one */
	unsigned char _unused7[3];
	volatile unsigned char cmepol;    /* VME polarity */
#else
	volatile unsigned char imask1;    /* Interrupt mask one */
	unsigned char _unused3[3];
	volatile unsigned char vmeistat;  /* VME interrupt status */
	unsigned char _unused4[3];
	volatile unsigned char cmeimask0; /* VME interrupt mask zero */
	unsigned char _unused5[3];
	volatile unsigned char cmeimask1; /* VME interrupt mask one */
	unsigned char _unused6[3];
	volatile unsigned char cmepol;    /* VME polarity */
	unsigned char _unused7[3];
#endif
};

struct sgi_ioc_timers {
#ifdef __MIPSEB__
	unsigned char _unused0[3];
	volatile unsigned char tcnt0;  /* counter 0 */
	unsigned char _unused1[3];
	volatile unsigned char tcnt1;  /* counter 1 */
	unsigned char _unused2[3];
	volatile unsigned char tcnt2;  /* counter 2 */
	unsigned char _unused3[3];
	volatile unsigned char tcword; /* control word */
#else
	volatile unsigned char tcnt0;  /* counter 0 */
	unsigned char _unused0[3];
	volatile unsigned char tcnt1;  /* counter 1 */
	unsigned char _unused1[3];
	volatile unsigned char tcnt2;  /* counter 2 */
	unsigned char _unused2[3];
	volatile unsigned char tcword; /* control word */
	unsigned char _unused3[3];
#endif
};

/* Timer control word bits. */
#define SGINT_TCWORD_BCD    0x01 /* Use BCD mode for counters */
#define SGINT_TCWORD_MMASK  0x0e /* Mode bitmask. */
#define SGINT_TCWORD_MITC   0x00 /* IRQ on terminal count (doesn't work) */
#define SGINT_TCWORD_MOS    0x02 /* One-shot IRQ mode. */
#define SGINT_TCWORD_MRGEN  0x04 /* Normal rate generation */
#define SGINT_TCWORD_MSWGEN 0x06 /* Square wave generator mode */
#define SGINT_TCWORD_MSWST  0x08 /* Software strobe */
#define SGINT_TCWORD_MHWST  0x0a /* Hardware strobe */
#define SGINT_TCWORD_CMASK  0x30 /* Command mask */
#define SGINT_TCWORD_CLAT   0x00 /* Latch command */
#define SGINT_TCWORD_CLSB   0x10 /* LSB read/write */
#define SGINT_TCWORD_CMSB   0x20 /* MSB read/write */
#define SGINT_TCWORD_CALL   0x30 /* Full counter read/write */
#define SGINT_TCWORD_CNT0   0x00 /* Select counter zero */
#define SGINT_TCWORD_CNT1   0x40 /* Select counter one */
#define SGINT_TCWORD_CNT2   0x80 /* Select counter two */
#define SGINT_TCWORD_CRBCK  0xc0 /* Readback command */

#define SGINT_TCSAMP_COUNTER  10255

/* FIXME: What does this really look like?  It was written to have
 * 17 registers, but there are only 16 in my Indigo2.
 * I guessed at which one to remove...  	- andrewb
 */
struct sgi_int2_regs {
	struct sgi_ioc_ints ints;

	volatile u32 ledbits; 		  /* LED control bits */
#define INT2_LED_TXCLK         0x01       /* GPI to TXCLK enable */
#define INT2_LED_SERSLCT0      0x02       /* serial port0: 0=apple 1=pc */
#define INT2_LED_SERSLCT1      0x04       /* serial port1: 0=apple 1=pc */
#define INT2_LED_CHEAPER       0x08       /* 0=cheapernet 1=ethernet */
#define INT2_LED_POWEROFF      0x10       /* Power-off request, active high */

#ifdef __MIPSEB__
	unsigned char _unused0[3];
	volatile unsigned char tclear;    /* Timer clear strobe address */
#else
	volatile unsigned char tclear;    /* Timer clear strobe address */
	unsigned char _unused0[3];
#endif
#define INT2_TCLEAR_T0CLR      0x1        /* Clear timer0 IRQ */
#define INT2_TCLEAR_T1CLR      0x2        /* Clear timer1 IRQ */
/* I am guesing there are only two unused registers here 
 * but I could be wrong...			- andrewb
 */
/*	u32 _unused[3]; */
	u32 _unused[2];
	struct sgi_ioc_timers timers;
};

struct sgi_int3_regs {
	struct sgi_ioc_ints ints;

#ifdef __MIPSEB__
	unsigned char _unused0[3];
	volatile unsigned char tclear;		/* Timer clear strobe address */
#else
	volatile unsigned char tclear;		/* Timer clear strobe address */
	unsigned char _unused0[3];
#endif
	volatile u32 estatus;			/* Error status reg */
	u32 _unused1[2];
	struct sgi_ioc_timers timers;
};

extern struct sgi_int2_regs *sgi_i2regs;
extern struct sgi_int3_regs *sgi_i3regs;
extern struct sgi_ioc_ints *ioc_icontrol;
extern struct sgi_ioc_timers *ioc_timers;
extern volatile unsigned char *ioc_tclear;

extern void sgint_init(void);
extern void indy_timer_init(void);

#endif /* _ASM_SGI_SGINT23_H */