atakeyb.c

移植到2410开发板上的源代码

		if (break_flag) {
		    del_timer( &atakeyb_rep_timer );
		    rep_scancode = 0;
		}
		else {
		    del_timer( &atakeyb_rep_timer );
		    rep_scancode = scancode;
		    atakeyb_rep_timer.expires = jiffies + key_repeat_delay;
		    add_timer( &atakeyb_rep_timer );
		}

		handle_scancode(scancode, !break_flag);
		break;
	    }
	    break;

	  case AMOUSE:
	    kb_state.buf[kb_state.len++] = scancode;
	    if (kb_state.len == 5)
	    {
		kb_state.state = KEYBOARD;
		/* not yet used */
		/* wake up someone waiting for this */
	    }
	    break;	

	  case RMOUSE:
	    kb_state.buf[kb_state.len++] = scancode;
	    if (kb_state.len == 3)
	    {
		kb_state.state = KEYBOARD;
		if (atari_mouse_interrupt_hook)
			atari_mouse_interrupt_hook(kb_state.buf);
	    }
	    break;

	  case JOYSTICK:
	    kb_state.buf[1] = scancode;
	    kb_state.state = KEYBOARD;
	    atari_joystick_interrupt(kb_state.buf);
	    break;

	  case CLOCK:
	    kb_state.buf[kb_state.len++] = scancode;
	    if (kb_state.len == 6)
	    {
		kb_state.state = KEYBOARD;
		/* wake up someone waiting for this.
		   But will this ever be used, as Linux keeps its own time.
		   Perhaps for synchronization purposes? */
		/* wake_up_interruptible(&clock_wait); */
	    }
	    break;

	  case RESYNC:
	    if (kb_state.len <= 0 || IS_SYNC_CODE(scancode)) {
		kb_state.state = KEYBOARD;
		goto interpret_scancode;
	    }
	    kb_state.len--;
	    break;
	}
    }

#if 0
    if (acia_stat & ACIA_CTS)
	/* cannot happen */;
#endif

    if (acia_stat & (ACIA_FE | ACIA_PE))
    {
	printk("Error in keyboard communication\n");
    }

    /* handle_scancode() can take a lot of time, so check again if
	 * some character arrived
	 */
    goto repeat;
}

/*
 * I write to the keyboard without using interrupts, I poll instead.
 * This takes for the maximum length string allowed (7) at 7812.5 baud
 * 8 data 1 start 1 stop bit: 9.0 ms
 * If this takes too long for normal operation, interrupt driven writing
 * is the solution. (I made a feeble attempt in that direction but I
 * kept it simple for now.)
 */
void ikbd_write(const char *str, int len)
{
    u_char acia_stat;

    if ((len < 1) || (len > 7))
	panic("ikbd: maximum string length exceeded");
    while (len)
    {
	acia_stat = acia.key_ctrl;
	if (acia_stat & ACIA_TDRE)
	{
	    acia.key_data = *str++;
	    len--;
	}
    }
}

/* Reset (without touching the clock) */
void ikbd_reset(void)
{
    static const char cmd[2] = { 0x80, 0x01 };
    
    ikbd_write(cmd, 2);

    /* if all's well code 0xF1 is returned, else the break codes of
       all keys making contact */
}

/* Set mouse button action */
void ikbd_mouse_button_action(int mode)
{
    char cmd[2] = { 0x07, mode };

    ikbd_write(cmd, 2);
}

/* Set relative mouse position reporting */
void ikbd_mouse_rel_pos(void)
{
    static const char cmd[1] = { 0x08 };

    ikbd_write(cmd, 1);
}

/* Set absolute mouse position reporting */
void ikbd_mouse_abs_pos(int xmax, int ymax)
{
    char cmd[5] = { 0x09, xmax>>8, xmax&0xFF, ymax>>8, ymax&0xFF };

    ikbd_write(cmd, 5);
}

/* Set mouse keycode mode */
void ikbd_mouse_kbd_mode(int dx, int dy)
{
    char cmd[3] = { 0x0A, dx, dy };

    ikbd_write(cmd, 3);
}

/* Set mouse threshold */
void ikbd_mouse_thresh(int x, int y)
{
    char cmd[3] = { 0x0B, x, y };

    ikbd_write(cmd, 3);
}

/* Set mouse scale */
void ikbd_mouse_scale(int x, int y)
{
    char cmd[3] = { 0x0C, x, y };

    ikbd_write(cmd, 3);
}

/* Interrogate mouse position */
void ikbd_mouse_pos_get(int *x, int *y)
{
    static const char cmd[1] = { 0x0D };

    ikbd_write(cmd, 1);

    /* wait for returning bytes */
}

/* Load mouse position */
void ikbd_mouse_pos_set(int x, int y)
{
    char cmd[6] = { 0x0E, 0x00, x>>8, x&0xFF, y>>8, y&0xFF };

    ikbd_write(cmd, 6);
}

/* Set Y=0 at bottom */
void ikbd_mouse_y0_bot(void)
{
    static const char cmd[1] = { 0x0F };

    ikbd_write(cmd, 1);
}

/* Set Y=0 at top */
void ikbd_mouse_y0_top(void)
{
    static const char cmd[1] = { 0x10 };

    ikbd_write(cmd, 1);
}

/* Resume */
void ikbd_resume(void)
{
    static const char cmd[1] = { 0x11 };

    ikbd_write(cmd, 1);
}

/* Disable mouse */
void ikbd_mouse_disable(void)
{
    static const char cmd[1] = { 0x12 };

    ikbd_write(cmd, 1);
}

/* Pause output */
void ikbd_pause(void)
{
    static const char cmd[1] = { 0x13 };

    ikbd_write(cmd, 1);
}

/* Set joystick event reporting */
void ikbd_joystick_event_on(void)
{
    static const char cmd[1] = { 0x14 };

    ikbd_write(cmd, 1);
}

/* Set joystick interrogation mode */
void ikbd_joystick_event_off(void)
{
    static const char cmd[1] = { 0x15 };

    ikbd_write(cmd, 1);
}

/* Joystick interrogation */
void ikbd_joystick_get_state(void)
{
    static const char cmd[1] = { 0x16 };

    ikbd_write(cmd, 1);
}

#if 0
/* This disables all other ikbd activities !!!! */
/* Set joystick monitoring */
void ikbd_joystick_monitor(int rate)
{
    static const char cmd[2] = { 0x17, rate };

    ikbd_write(cmd, 2);

    kb_state.state = JOYSTICK_MONITOR;
}
#endif

/* some joystick routines not in yet (0x18-0x19) */

/* Disable joysticks */
void ikbd_joystick_disable(void)
{
    static const char cmd[1] = { 0x1A };

    ikbd_write(cmd, 1);
}

/* Time-of-day clock set */
void ikbd_clock_set(int year, int month, int day, int hour, int minute, int second)
{
    char cmd[7] = { 0x1B, year, month, day, hour, minute, second };

    ikbd_write(cmd, 7);
}

/* Interrogate time-of-day clock */
void ikbd_clock_get(int *year, int *month, int *day, int *hour, int *minute, int second)
{
    static const char cmd[1] = { 0x1C };

    ikbd_write(cmd, 1);
}

/* Memory load */
void ikbd_mem_write(int address, int size, char *data)
{
    panic("Attempt to write data into keyboard memory");
}

/* Memory read */
void ikbd_mem_read(int address, char data[6])
{
    char cmd[3] = { 0x21, address>>8, address&0xFF };

    ikbd_write(cmd, 3);

    /* receive data and put it in data */
}

/* Controller execute */
void ikbd_exec(int address)
{
    char cmd[3] = { 0x22, address>>8, address&0xFF };

    ikbd_write(cmd, 3);
}

/* Status inquiries (0x87-0x9A) not yet implemented */

/* Set the state of the caps lock led. */
void atari_kbd_leds (unsigned int leds)
{
    char cmd[6] = {32, 0, 4, 1, 254 + ((leds & 4) != 0), 0};
    ikbd_write(cmd, 6);
}

/*
 * The original code sometimes left the interrupt line of 
 * the ACIAs low forever. I hope, it is fixed now.
 *
 * Martin Rogge, 20 Aug 1995
 */
 
int __init atari_keyb_init(void)
{
    /* setup key map */
    memcpy(key_maps[0], ataplain_map, sizeof(plain_map));
    memcpy(key_maps[1], atashift_map, sizeof(plain_map));
    memcpy(key_maps[4], atactrl_map, sizeof(plain_map));
    memcpy(key_maps[5], atashift_ctrl_map, sizeof(plain_map));
    memcpy(key_maps[8], ataalt_map, sizeof(plain_map));
    /* Atari doesn't have an altgr_map, so we can reuse its memory for
       atashift_alt_map */
    memcpy(key_maps[2], atashift_alt_map, sizeof(plain_map));
    key_maps[9]  = key_maps[2];
    key_maps[2]  = 0; /* ataaltgr_map */
    memcpy(key_maps[12], atactrl_alt_map, sizeof(plain_map));
    key_maps[13] = atashift_ctrl_alt_map;
    keymap_count = 8;

    /* say that we don't have an AltGr key */
    keyboard_type = KB_84;

    kb_state.state = KEYBOARD;
    kb_state.len = 0;

    request_irq(IRQ_MFP_ACIA, keyboard_interrupt, IRQ_TYPE_SLOW,
                "keyboard/mouse/MIDI", keyboard_interrupt);

    atari_turnoff_irq(IRQ_MFP_ACIA);
    do {
	/* reset IKBD ACIA */
	acia.key_ctrl = ACIA_RESET |
			(atari_switches & ATARI_SWITCH_IKBD) ? ACIA_RHTID : 0;
	(void)acia.key_ctrl;
	(void)acia.key_data;

	/* reset MIDI ACIA */
	acia.mid_ctrl = ACIA_RESET |
			(atari_switches & ATARI_SWITCH_MIDI) ? ACIA_RHTID : 0;
	(void)acia.mid_ctrl;
	(void)acia.mid_data;

	/* divide 500kHz by 64 gives 7812.5 baud */
	/* 8 data no parity 1 start 1 stop bit */
	/* receive interrupt enabled */
	/* RTS low (except if switch selected), transmit interrupt disabled */
	acia.key_ctrl = (ACIA_DIV64|ACIA_D8N1S|ACIA_RIE) |
			((atari_switches & ATARI_SWITCH_IKBD) ?
			 ACIA_RHTID : ACIA_RLTID);
	   
	acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S |
			(atari_switches & ATARI_SWITCH_MIDI) ? ACIA_RHTID : 0;
    }
    /* make sure the interrupt line is up */
    while ((mfp.par_dt_reg & 0x10) == 0);

    /* enable ACIA Interrupts */ 
    mfp.active_edge &= ~0x10;
    atari_turnon_irq(IRQ_MFP_ACIA);

    ikbd_self_test = 1;
    ikbd_reset();
    /* wait for a period of inactivity (here: 0.25s), then assume the IKBD's
     * self-test is finished */
    self_test_last_rcv = jiffies;
    while (time_before(jiffies, self_test_last_rcv + HZ/4))
	barrier();
    /* if not incremented: no 0xf1 received */
    if (ikbd_self_test == 1)
	printk( KERN_ERR "WARNING: keyboard self test failed!\n" );
    ikbd_self_test = 0;
    
    ikbd_mouse_disable();
    ikbd_joystick_disable();

    atari_joystick_init();
  
    return 0;
}


int atari_kbdrate( struct kbd_repeat *k )

{
	if (k->delay > 0) {
		/* convert from msec to jiffies */
		key_repeat_delay = (k->delay * HZ + 500) / 1000;
		if (key_repeat_delay < 1)
			key_repeat_delay = 1;
	}
	if (k->rate > 0) {
		key_repeat_rate = (k->rate * HZ + 500) / 1000;
		if (key_repeat_rate < 1)
			key_repeat_rate = 1;
	}

	k->delay = key_repeat_delay * 1000 / HZ;
	k->rate  = key_repeat_rate  * 1000 / HZ;
	
	return( 0 );
}

int atari_kbd_translate(unsigned char keycode, unsigned char *keycodep, char raw_mode)
{
#ifdef CONFIG_MAGIC_SYSRQ
        /* ALT+HELP pressed? */
        if ((keycode == 98) && ((shift_state & 0xff) == 8))
                *keycodep = 0xff;
        else
#endif
                *keycodep = keycode;
        return 1;
}