main.c

51单片机开始的24064点陈显示屏驱动程序

#include <reg52.h>
#include <absacc.h>
#include <stdio.h>   
#include "LCD.H" 

uchar linschar[6]= {0,1,2,3,4,5} ;   //用于存放要显示的字符串的偏移地址
uchar code wordcode[6][32] =   
  {  
	//啊  
	0x00,0x04,0x2F,0x7E,0xF9,0x04,0x0A9,0x04,       
	0x0AA,0x14,0x0AA,0x7C,0x0AC,0x54,0x0AA,0x54,
	0x0AA,0x54,0x0A9,0x54,0x0E9,0x74,0x0AD,0x54,
	0x0A,0x04,0x08,0x04,0x08,0x14,0x08,0x0C,
	//欣  
	0x2,0x7,0x38,0x20,0x20,0x20,0x3F,0x24,
	0x24,0x24,0x24,0x24,0x44,0x44,0x85,0x2,
	0x40,0x40,0x40,0x40,0x7E,0x82,0x24,0x20,
	0x20,0x20,0x50,0x50,0x88,0x88,0x6,0x4,
	
	//瑞               
	0x0,0x14,0x0FC,0x24,0x24,0x27,0x20,0x0FF,
	0x20,0x27,0x24,0x24,0x3C,0x0E4,0x44,0x4,
	0x40,0x44,0x44,0x44,0x44,0x0FC,0x0,0x0FE,
	0x84,0x0FE,0x0A4,0x0A4,0x0A4,0x0A4,0x0A4,0x0C,
	
	//佳
	0x08,0x08,0x08,0x17,0x10,0x30,0x5F,0x90,
	0x10,0x10,0x17,0x10,0x10,0x10,0x1F,0x10,
	0x40,0x40,0x48,0xFC,0x40,0x44,0xFE,0x40,
	0x40,0x48,0xFC,0x40,0x40,0x44,0xFE,0x0,
	
	//科
	0x4,0xE,0xF8,0x8,0x8,0xFE,0x8,0x1C,
	0x1A,0x29,0x28,0x48,0x88,0x8,0x8,0x8,
	0x10,0x10,0x90,0x50,0x10,0x90,0x50,0x14,
	0x1E,0xF0,0x10,0x10,0x10,0x10,0x10,0x10,
	
	//技
	0x10,0x10,0x10,0x13,0xFC,0x10,0x10,0x13,
	0x1A,0x31,0xD1,0x10,0x10,0x10,0x51,0x26,
	0x40,0x40,0x48,0xFC,0x40,0x40,0x40,0xF8,
	0x8,0x10,0x10,0xA0,0x40,0xB0,0x0E,0x4               
  };

void main ()
{

	uchar i;
	uint start;    

	for( i = 0; i<254; i++  );                 //开机延时 
	lcd_init();                                //初始化显示屏寄存器
	writedc ( 0x00, 0x00, 0x24 );              //显示地址点建立
	
	for( start = 0; start < 1920 ; start++ )   //清屏
	  {
	    writesdc( 0x00,0xc0 );                
	  }
	
	while(1)
	 {
       //显示16*16点阵汉字"欣瑞佳科技"
	   for( i= 1; i<6 ;i++ )
	    {
	      display32(0x00,0x00+56+i*16,0x00, wordcode[ linschar[i] ]);   
	    }	
	 }
}