📄 pshints.h
字号:
T1_Hints_CloseFunc close;
T1_Hints_SetStemFunc stem;
T1_Hints_SetStem3Func stem3;
T1_Hints_ResetFunc reset;
T1_Hints_ApplyFunc apply;
} T1_Hints_FuncsRec;
/*************************************************************************/
/*************************************************************************/
/***** *****/
/***** PUBLIC TYPE 2 HINTS RECORDER *****/
/***** *****/
/*************************************************************************/
/*************************************************************************/
/*************************************************************************
*
* @type:
* T2_Hints
*
* @description:
* This is a handle to an opaque structure used to record glyph hints
* from a Type 2 character glyph character string.
*
* The methods used to operate on this object are defined by the
* @T2_Hints_FuncsRec structure. Recording glyph hints is normally
* achieved through the following scheme:
*
* - Open a new hint recording session by calling the `open' method.
* This rewinds the recorder and prepare it for new input.
*
* - For each hint found in the glyph charstring, call the corresponding
* method (`stems', `hintmask', `counters'). Note that these
* functions do not return an error code.
*
* - Close the recording session by calling the `close' method. It
* returns an error code if the hints were invalid or something
* strange happened (e.g., memory shortage).
*
* The hints accumulated in the object can later be used by the
* Postscript hinter.
*
*/
typedef struct T2_HintsRec_* T2_Hints;
/*************************************************************************
*
* @type:
* T2_Hints_Funcs
*
* @description:
* A pointer to the @T2_Hints_FuncsRec structure that defines the API of
* a given @T2_Hints object.
*
*/
typedef const struct T2_Hints_FuncsRec_* T2_Hints_Funcs;
/*************************************************************************
*
* @functype:
* T2_Hints_OpenFunc
*
* @description:
* A method of the @T2_Hints class used to prepare it for a new Type 2
* hints recording session.
*
* @input:
* hints ::
* A handle to the Type 2 hints recorder.
*
* @note:
* You should always call the @T2_Hints_CloseFunc method in order to
* close an opened recording session.
*
*/
typedef void
(*T2_Hints_OpenFunc)( T2_Hints hints );
/*************************************************************************
*
* @functype:
* T2_Hints_StemsFunc
*
* @description:
* A method of the @T2_Hints class used to set the table of stems in
* either the vertical or horizontal dimension. Equivalent to the
* `hstem', `vstem', `hstemhm', and `vstemhm' Type 2 operators.
*
* @input:
* hints ::
* A handle to the Type 2 hints recorder.
*
* dimension ::
* 0 for horizontal stems (hstem), 1 for vertical ones (vstem).
*
* count ::
* The number of stems.
*
* coords ::
* An array of `count' (position,length) pairs.
*
* @note:
* Use vertical coordinates (y) for horizontal stems (dim=0). Use
* horizontal coordinates (x) for vertical stems (dim=1).
*
* There are `2*count' elements in the `coords' array. Each even
* element is an absolute position in font units, each odd element is a
* length in font units.
*
* A length can be negative, in which case it must be either -20 or
* -21. It is interpreted as a `ghost' stem, according to the Type 1
* specification.
*
*/
typedef void
(*T2_Hints_StemsFunc)( T2_Hints hints,
FT_UInt dimension,
FT_UInt count,
FT_Fixed* coordinates );
/*************************************************************************
*
* @functype:
* T2_Hints_MaskFunc
*
* @description:
* A method of the @T2_Hints class used to set a given hintmask (this
* corresponds to the `hintmask' Type 2 operator).
*
* @input:
* hints ::
* A handle to the Type 2 hints recorder.
*
* end_point ::
* The glyph index of the last point to which the previously defined
* or activated hints apply.
*
* bit_count ::
* The number of bits in the hint mask.
*
* bytes ::
* An array of bytes modelling the hint mask.
*
* @note:
* If the hintmask starts the charstring (before any glyph point
* definition), the value of `end_point' should be 0.
*
* `bit_count' is the number of meaningful bits in the `bytes' array; it
* must be equal to the total number of hints defined so far (i.e.,
* horizontal+verticals).
*
* The `bytes' array can come directly from the Type 2 charstring and
* respects the same format.
*
*/
typedef void
(*T2_Hints_MaskFunc)( T2_Hints hints,
FT_UInt end_point,
FT_UInt bit_count,
const FT_Byte* bytes );
/*************************************************************************
*
* @functype:
* T2_Hints_CounterFunc
*
* @description:
* A method of the @T2_Hints class used to set a given counter mask
* (this corresponds to the `hintmask' Type 2 operator).
*
* @input:
* hints ::
* A handle to the Type 2 hints recorder.
*
* end_point ::
* A glyph index of the last point to which the previously defined or
* active hints apply.
*
* bit_count ::
* The number of bits in the hint mask.
*
* bytes ::
* An array of bytes modelling the hint mask.
*
* @note:
* If the hintmask starts the charstring (before any glyph point
* definition), the value of `end_point' should be 0.
*
* `bit_count' is the number of meaningful bits in the `bytes' array; it
* must be equal to the total number of hints defined so far (i.e.,
* horizontal+verticals).
*
* The `bytes' array can come directly from the Type 2 charstring and
* respects the same format.
*
*/
typedef void
(*T2_Hints_CounterFunc)( T2_Hints hints,
FT_UInt bit_count,
const FT_Byte* bytes );
/*************************************************************************
*
* @functype:
* T2_Hints_CloseFunc
*
* @description:
* A method of the @T2_Hints class used to close a hint recording
* session.
*
* @input:
* hints ::
* A handle to the Type 2 hints recorder.
*
* end_point ::
* The index of the last point in the input glyph.
*
* @return:
* FreeType error code. 0 means success.
*
* @note:
* The error code is set to indicate that an error occurred during the
* recording session.
*
*/
typedef FT_Error
(*T2_Hints_CloseFunc)( T2_Hints hints,
FT_UInt end_point );
/*************************************************************************
*
* @functype:
* T2_Hints_ApplyFunc
*
* @description:
* A method of the @T2_Hints class used to apply hints to the
* corresponding glyph outline. Must be called after the `close'
* method.
*
* @input:
* hints ::
* A handle to the Type 2 hints recorder.
*
* outline ::
* A pointer to the target outline descriptor.
*
* globals ::
* The hinter globals for this font.
*
* hint_mode ::
* Hinting information.
*
* @return:
* FreeType error code. 0 means success.
*
* @note:
* On input, all points within the outline are in font coordinates. On
* output, they are in 1/64th of pixels.
*
* The scaling transformation is taken from the `globals' object which
* must correspond to the same font than the glyph.
*
*/
typedef FT_Error
(*T2_Hints_ApplyFunc)( T2_Hints hints,
FT_Outline* outline,
PSH_Globals globals,
FT_Render_Mode hint_mode );
/*************************************************************************
*
* @struct:
* T2_Hints_FuncsRec
*
* @description:
* The structure used to provide the API to @T2_Hints objects.
*
* @fields:
* hints ::
* A handle to the T2 hints recorder object.
*
* open ::
* The function to open a recording session.
*
* close ::
* The function to close a recording session.
*
* stems ::
* The function to set the dimension's stems table.
*
* hintmask ::
* The function to set hint masks.
*
* counter ::
* The function to set counter masks.
*
* apply ::
* The function to apply the hints on the corresponding glyph outline.
*
*/
typedef struct T2_Hints_FuncsRec_
{
T2_Hints hints;
T2_Hints_OpenFunc open;
T2_Hints_CloseFunc close;
T2_Hints_StemsFunc stems;
T2_Hints_MaskFunc hintmask;
T2_Hints_CounterFunc counter;
T2_Hints_ApplyFunc apply;
} T2_Hints_FuncsRec;
/* */
typedef struct PSHinter_Interface_
{
PSH_Globals_Funcs (*get_globals_funcs)( FT_Module module );
T1_Hints_Funcs (*get_t1_funcs) ( FT_Module module );
T2_Hints_Funcs (*get_t2_funcs) ( FT_Module module );
} PSHinter_Interface;
typedef PSHinter_Interface* PSHinter_Service;
FT_END_HEADER
#endif /* __PSHINTS_H__ */
/* END */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -