define.h.bak

mtv512mg + mx88v462 液晶电视驱动C完整程序

/*-------------------------------------------------------------------------
DEFINE.H

Copyright 2004 Macronix International Co., Ltd.
-------------------------------------------------------------------------*/
#ifndef _DEFINE_H_

	#define _DEFINE_H_

//============== Declare Data type & value ============================

	typedef bit             Bit;

	typedef unsigned char   BYTE;
	typedef unsigned int    WORD;
	typedef unsigned long   LONG;

	#define DATA            data
	#define IDATA           idata
	#define PDATA           pdata
	#define XDATA           xdata
	#define RDATA           code

	#define	V462_WRID		0x28		//V462's	I2C write ID
	#define	EEPROM_WRID		0xA0		//EEPROM	I2C write ID

	#define	OSD_EN			0x16		
	
	#define	OSDADDR_L		0xF2		//OSD Addr Low byte Port
	#define	OSDADDR_H		0xF3		//OSD Addr Hi  byte Port
	#define	OSDDATA_L 		0xF4		//OSD Data Low byte Port
	#define	OSDDATA_H 		0xF5		//OSD Data Hi  byte Port
	#define	ORWCTRL			0xF6		//OSD Read/Write Control Port
	
		/*------	OSD External Reg. 0xE4 bit define	-------------------
		 *		bit		7 6 5 4 3 2 1 0
	 	 *				| |	|	  | +--		D1-0: Internal OSD accessing select
	 	 *				| | |	  |					00 - OSD control Reg.
	 	 *				| | |  	  |					01 - OSD RAM Font buffer
	 	 *				| | |     |					10 - OSD Display code buffer
	 	 *				| | |  	  |					11 - OSD Display attr buffer
	 	 *				| | |	  +----		D2: Internal OSD R/W enable
	 	 *				| | |						0  - Enable OSD Reg. and buf
		 * 			 	| | |						1  - Disable
	 	 *				| |	+ ---------		D5:Select Read/Write mode
	 	 *				| |							0  - Write mode
	 	 *				| |							1  - Read  mode
		 *				| + -----------		OSD Clear buffer bit
		 *				| 							0  - Normal
		 *				|							1  - Clear Code buffer to 0x59
		 *				|								 Clear Attr buffer to 0x00
		 *				+ -------------		OSD burst  mode Select	
		 *											0  - Single read/write mode
		 *											1  - Burst  read/write mode
		 *--------------------------------------------------------------------------*/
	#define	SEL_OSDCTRLREG	0x00		//Value for ORWCTRL(0xE4) Reg.
	#define SEL_OSDDISPCODE	0x02
	#define SEL_OSDDISPATTR	0x03
	#define CLR_OSD_BUF		0x40
	
	#define OSDCTRLREG		0x08		//OSD Control Reg index
	#define	OSDWINON		0x03		//Value for char border and main OSD ON
	#define OSDWINOFF		0x02		//Value for char border and main OSD OFF
	/*--------------------------------------------------------------------------
	 *	OSD Display code buffer is 256bytes(128chars) format is followed
	 *		bit		7 6 5 4 3 2 1 0		//Low byte
	 *				| |	
	 *				| |	
	 *				| + -----------		D6-0: Character Code
	 *				+ -------------		0: ROM Font 		1: RAM Font
	 *
	 *		bit		F E D C B A 9 8		//Hi  byte
	 *						  | | +		0: Blink OFF		1: Blink ON
	 *						  |	+--		0: BG transparent	1: BG opaque
	 *						  +----		0: Border OFF		1: Border ON
	 *
	 *	OSD Display Attr buffer is 256bytes(128chars) format is followed
	 *		bit		7 6 5 4 3 2 1 0		//Low byte: background color select
	 *		bit		F E D C B A 9 8		//Hi  byte: foreground color select
	 */
	
	//----------------------------------------------------------------------------
	
	#define	RX_PARSE	0x80						//pack data ready, wait process Parse routine
	#define	TV_STD_L	18

	
	#define	FG_COLOR		0x0A
	#define FG_COLOR_H		0x0E
	#define	BG_COLOR		0x01

								
	#define ENTER			0xE8
	#define	RIGHT			0xA8
	#define	LEFT			0xD8
	#define	UP				0xF8
	#define DOWN			0x68
	#define	MENU			0x88
	#define ONOFF			0x90
	
	#define MUTE			0x98
//	#define SLEEP			0x81
//	#define PP				0x82
//	#define SYS				0x83
	#define CALL			0x30
	
	#define	N_0				0x28
	#define	N_1				0x02
	#define	N_2				0x32
	#define	N_3				0x20
	#define	N_4				0x00
	#define	N_5				0x50
	#define	N_6				0x78
	#define	N_7				0x70
	#define	N_8				0x58
	#define	N_9				0x38
	#define	N_SW			0xF0
			
	#define W_TYPE			0x01		//Type for Write in CVD1 
	#define R_TYPE			0x00
	
	#define GAMMA_CTR		0x0C
	#define	GAMMA_PORT		0x15
	

//============== Special Pin define ===================================


	#define I2C_SCL			P1_3
	#define I2C_SDA			P1_2
	
	#define	I2C_SCL2		P1_1
	#define	I2C_SDA2		P1_0
	
	#define	AUDIO_CHANEL1	P7_7
	#define	AUDIO_CHANEL2	P7_6
	 
	#define	SYS_RST			P5_7

//	#define	POWER			P5_0
//	#define	TV_POWER		P5_1	// 
	#define	PANEL_EN		P5_6

//	#define AUDIO_MUTE		P5_4
	
	#define	LED_R			P1_4
	#define	LED_G			P1_5

	#define	PWM_VOLUME		DA5

	#define	IR_SND			P3_4

#endif