⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 cfi_probe.c

📁 linux下的MTD设备驱动源代码,配合jffs2 yaffss2文件系统.
💻 C
字号:
/*    Common Flash Interface probe code.   (C) 2000 Red Hat. GPL'd.   $Id: cfi_probe.c,v 1.74 2004/02/17 16:43:41 dvrabel Exp $*/#include <linux/config.h>#include <linux/module.h>#include <linux/types.h>#include <linux/kernel.h>#include <linux/init.h>#include <asm/io.h>#include <asm/byteorder.h>#include <linux/errno.h>#include <linux/slab.h>#include <linux/interrupt.h>#include <linux/mtd/map.h>#include <linux/mtd/cfi.h>#include <linux/mtd/gen_probe.h>//#define DEBUG_CFI #ifdef DEBUG_CFIstatic void print_cfi_ident(struct cfi_ident *);#endifstatic int cfi_probe_chip(struct map_info *map, __u32 base,			  unsigned long *chip_map, struct cfi_private *cfi);static int cfi_chip_setup(struct map_info *map, struct cfi_private *cfi);struct mtd_info *cfi_probe(struct map_info *map);/* check for QRY.   in: interleave,type,mode   ret: table index, <0 for error */static inline int qry_present(struct map_info *map, __u32 base,				struct cfi_private *cfi){	int osf = cfi->interleave * cfi->device_type;	// scale factor	if (cfi_read(map,base+osf*0x10)==cfi_build_cmd('Q',map,cfi) &&	    cfi_read(map,base+osf*0x11)==cfi_build_cmd('R',map,cfi) &&	    cfi_read(map,base+osf*0x12)==cfi_build_cmd('Y',map,cfi))		return 1;	// ok !	return 0; 	// nothing found}static int cfi_probe_chip(struct map_info *map, __u32 base,			  unsigned long *chip_map, struct cfi_private *cfi){	int i;		if ((base + 0) >= map->size) {		printk(KERN_NOTICE			"Probe at base[0x00](0x%08lx) past the end of the map(0x%08lx)\n",			(unsigned long)base, map->size -1);		return 0;	}	if ((base + 0xff) >= map->size) {		printk(KERN_NOTICE			"Probe at base[0x55](0x%08lx) past the end of the map(0x%08lx)\n",			(unsigned long)base + 0x55, map->size -1);		return 0;	}	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);	cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);	if (!qry_present(map,base,cfi))		return 0;	if (!cfi->numchips) {		/* This is the first time we're called. Set up the CFI 		   stuff accordingly and return */		return cfi_chip_setup(map, cfi);	}	/* Check each previous chip to see if it's an alias */ 	for (i=0; i < (base >> cfi->chipshift); i++) { 		unsigned long start; 		if(!test_bit(i, chip_map)) {			/* Skip location; no valid chip at this address */ 			continue;  		} 		start = i << cfi->chipshift;		/* This chip should be in read mode if it's one		   we've already touched. */		if (qry_present(map, start, cfi)) {			/* Eep. This chip also had the QRY marker. 			 * Is it an alias for the new one? */			cfi_send_gen_cmd(0xF0, 0, start, map, cfi, cfi->device_type, NULL);			/* If the QRY marker goes away, it's an alias */			if (!qry_present(map, start, cfi)) {				printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",				       map->name, base, start);				return 0;			}			/* Yes, it's actually got QRY for data. Most 			 * unfortunate. Stick the new chip in read mode			 * too and if it's the same, assume it's an alias. */			/* FIXME: Use other modes to do a proper check */			cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);						if (qry_present(map, base, cfi)) {				printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",				       map->name, base, start);				return 0;			}		}	}		/* OK, if we got to here, then none of the previous chips appear to	   be aliases for the current one. */	set_bit((base >> cfi->chipshift), chip_map); /* Update chip map */	cfi->numchips++;		/* Put it back into Read Mode */	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);	printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit mode\n",	       map->name, cfi->interleave, cfi->device_type*8, base,	       map->buswidth*8);		return 1;}static int cfi_chip_setup(struct map_info *map, 		   struct cfi_private *cfi){	int ofs_factor = cfi->interleave*cfi->device_type;	__u32 base = 0;	int num_erase_regions = cfi_read_query(map, base + (0x10 + 28)*ofs_factor);	int i;#ifdef DEBUG_CFI	printk("Number of erase regions: %d\n", num_erase_regions);#endif	if (!num_erase_regions)		return 0;	cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL);	if (!cfi->cfiq) {		printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name);		return 0;	}		memset(cfi->cfiq,0,sizeof(struct cfi_ident));			cfi->cfi_mode = CFI_MODE_CFI;		/* Read the CFI info structure */	for (i=0; i<(sizeof(struct cfi_ident) + num_erase_regions * 4); i++) {		((unsigned char *)cfi->cfiq)[i] = cfi_read_query(map,base + (0x10 + i)*ofs_factor);	}		/* Do any necessary byteswapping */	cfi->cfiq->P_ID = le16_to_cpu(cfi->cfiq->P_ID);		cfi->cfiq->P_ADR = le16_to_cpu(cfi->cfiq->P_ADR);	cfi->cfiq->A_ID = le16_to_cpu(cfi->cfiq->A_ID);	cfi->cfiq->A_ADR = le16_to_cpu(cfi->cfiq->A_ADR);	cfi->cfiq->InterfaceDesc = le16_to_cpu(cfi->cfiq->InterfaceDesc);	cfi->cfiq->MaxBufWriteSize = le16_to_cpu(cfi->cfiq->MaxBufWriteSize);#ifdef DEBUG_CFI	/* Dump the information therein */	print_cfi_ident(cfi->cfiq);#endif	for (i=0; i<cfi->cfiq->NumEraseRegions; i++) {		cfi->cfiq->EraseRegionInfo[i] = le32_to_cpu(cfi->cfiq->EraseRegionInfo[i]);		#ifdef DEBUG_CFI				printk("  Erase Region #%d: BlockSize 0x%4.4X bytes, %d blocks\n",		       i, (cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xff, 		       (cfi->cfiq->EraseRegionInfo[i] & 0xffff) + 1);#endif	}	/* Note we put the device back into Read Mode BEFORE going into Auto	 * Select Mode, as some devices support nesting of modes, others	 * don't. This way should always work.	 * On cmdset 0001 the writes of 0xaa and 0x55 are not needed, and	 * so should be treated as nops or illegal (and so put the device	 * back into Read Mode, which is a nop in this case).	 */	cfi_send_gen_cmd(0xf0,     0, base, map, cfi, cfi->device_type, NULL);	cfi_send_gen_cmd(0xaa, 0x555, base, map, cfi, cfi->device_type, NULL);	cfi_send_gen_cmd(0x55, 0x2aa, base, map, cfi, cfi->device_type, NULL);	cfi_send_gen_cmd(0x90, 0x555, base, map, cfi, cfi->device_type, NULL);	cfi->mfr = cfi_read_query(map, base);	cfi->id = cfi_read_query(map, base + ofs_factor);    	/* Put it back into Read Mode */	cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);	printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit mode\n",	       map->name, cfi->interleave, cfi->device_type*8, base,	       map->buswidth*8);	return 1;}#ifdef DEBUG_CFIstatic char *vendorname(__u16 vendor) {	switch (vendor) {	case P_ID_NONE:		return "None";			case P_ID_INTEL_EXT:		return "Intel/Sharp Extended";			case P_ID_AMD_STD:		return "AMD/Fujitsu Standard";			case P_ID_INTEL_STD:		return "Intel/Sharp Standard";			case P_ID_AMD_EXT:		return "AMD/Fujitsu Extended";			case P_ID_MITSUBISHI_STD:		return "Mitsubishi Standard";			case P_ID_MITSUBISHI_EXT:		return "Mitsubishi Extended";			case P_ID_RESERVED:		return "Not Allowed / Reserved for Future Use";			default:		return "Unknown";	}}static void print_cfi_ident(struct cfi_ident *cfip){#if 0	if (cfip->qry[0] != 'Q' || cfip->qry[1] != 'R' || cfip->qry[2] != 'Y') {		printk("Invalid CFI ident structure.\n");		return;	}	#endif			printk("Primary Vendor Command Set: %4.4X (%s)\n", cfip->P_ID, vendorname(cfip->P_ID));	if (cfip->P_ADR)		printk("Primary Algorithm Table at %4.4X\n", cfip->P_ADR);	else		printk("No Primary Algorithm Table\n");		printk("Alternative Vendor Command Set: %4.4X (%s)\n", cfip->A_ID, vendorname(cfip->A_ID));	if (cfip->A_ADR)		printk("Alternate Algorithm Table at %4.4X\n", cfip->A_ADR);	else		printk("No Alternate Algorithm Table\n");					printk("Vcc Minimum: %2d.%d V\n", cfip->VccMin >> 4, cfip->VccMin & 0xf);	printk("Vcc Maximum: %2d.%d V\n", cfip->VccMax >> 4, cfip->VccMax & 0xf);	if (cfip->VppMin) {		printk("Vpp Minimum: %2d.%d V\n", cfip->VppMin >> 4, cfip->VppMin & 0xf);		printk("Vpp Maximum: %2d.%d V\n", cfip->VppMax >> 4, cfip->VppMax & 0xf);	}	else		printk("No Vpp line\n");		printk("Typical byte/word write timeout: %d 祍\n", 1<<cfip->WordWriteTimeoutTyp);	printk("Maximum byte/word write timeout: %d 祍\n", (1<<cfip->WordWriteTimeoutMax) * (1<<cfip->WordWriteTimeoutTyp));		if (cfip->BufWriteTimeoutTyp || cfip->BufWriteTimeoutMax) {		printk("Typical full buffer write timeout: %d 祍\n", 1<<cfip->BufWriteTimeoutTyp);		printk("Maximum full buffer write timeout: %d 祍\n", (1<<cfip->BufWriteTimeoutMax) * (1<<cfip->BufWriteTimeoutTyp));	}	else		printk("Full buffer write not supported\n");		printk("Typical block erase timeout: %d ms\n", 1<<cfip->BlockEraseTimeoutTyp);	printk("Maximum block erase timeout: %d ms\n", (1<<cfip->BlockEraseTimeoutMax) * (1<<cfip->BlockEraseTimeoutTyp));	if (cfip->ChipEraseTimeoutTyp || cfip->ChipEraseTimeoutMax) {		printk("Typical chip erase timeout: %d ms\n", 1<<cfip->ChipEraseTimeoutTyp); 		printk("Maximum chip erase timeout: %d ms\n", (1<<cfip->ChipEraseTimeoutMax) * (1<<cfip->ChipEraseTimeoutTyp));	}	else		printk("Chip erase not supported\n");		printk("Device size: 0x%X bytes (%d MiB)\n", 1 << cfip->DevSize, 1<< (cfip->DevSize - 20));	printk("Flash Device Interface description: 0x%4.4X\n", cfip->InterfaceDesc);	switch(cfip->InterfaceDesc) {	case 0:		printk("  - x8-only asynchronous interface\n");		break;			case 1:		printk("  - x16-only asynchronous interface\n");		break;			case 2:		printk("  - supports x8 and x16 via BYTE# with asynchronous interface\n");		break;			case 3:		printk("  - x32-only asynchronous interface\n");		break;			case 65535:		printk("  - Not Allowed / Reserved\n");		break;			default:		printk("  - Unknown\n");		break;	}		printk("Max. bytes in buffer write: 0x%x\n", 1<< cfip->MaxBufWriteSize);	printk("Number of Erase Block Regions: %d\n", cfip->NumEraseRegions);	}#endif /* DEBUG_CFI */static struct chip_probe cfi_chip_probe = {	.name		= "CFI",	.probe_chip	= cfi_probe_chip};struct mtd_info *cfi_probe(struct map_info *map){	/*	 * Just use the generic probe stuff to call our CFI-specific	 * chip_probe routine in all the possible permutations, etc.	 */	return mtd_do_chip_probe(map, &cfi_chip_probe);}static struct mtd_chip_driver cfi_chipdrv = {	.probe		= cfi_probe,	.name		= "cfi_probe",	.module		= THIS_MODULE};int __init cfi_probe_init(void){	register_mtd_chip_driver(&cfi_chipdrv);	return 0;}static void __exit cfi_probe_exit(void){	unregister_mtd_chip_driver(&cfi_chipdrv);}module_init(cfi_probe_init);module_exit(cfi_probe_exit);MODULE_LICENSE("GPL");MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al.");MODULE_DESCRIPTION("Probe code for CFI-compliant flash chips");

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -