changes

可进行电力系统多节点系统的优化潮流计算

-----------------------------
 Change history for MATPOWER
-----------------------------

Version:    3.0.0

maintained by Ray Zimmerman <[e-mail]>

MATPOWER
$Id: CHANGES,v 1.22 2005/02/14 17:22:27 ray Exp $
Copyright (c) 1996-2004 by Power System Engineering Research Center (PSERC)
See http://www.pserc.cornell.edu/matpower/ for more info.


Changes since 3.0b4
-------------------

2/14/05
    - Released version 3.0.0.

2/3/05
    - In mp_lp.m and mp_qp.m, on Windows it now makes sure BPMPD_MEX is not
      called in verbose mode which causes a Matlab crash.


Changes since 3.0b3
-------------------

1/28/05
    - Released version 3.0b4.

1/27/05
    - Added case6ww.m and case4gs.m.
    - Minor modifications to printpf.m to handle larger bus numbers.

1/26/05
    - Minor changes to uopf.m to make sure it plays nicely with dispatchable
      loads.

1/25/05
    - Major updates to user manual.

1/24/05
    - Switched to using the new isload() to check for dispatchable load.
    - For dispatchable loads, switched from using PG and QG to PMIN and either
      QMIN (for inductive loads) or QMAX (for capacitive loads) to define the
      constant power factor constraint. This prevents the power factor
      information from being lost when it is dispatched to zero. If the initial
      values of PG and QG are not consistent with the ratio defined by PMIN
      and the appropriate Q limit it gives an error. This is to prevent a user
      from unknowingly using a case file which would have defined a different
      power factor constraint under previous versions of MATPOWER.
      If both QMIN and QMAX are zero, it no longer includes the redundant
      unity power factor constraint.

1/20/05
    - Updated printpf.m to display dispatchable loads and generators
      separately. Reorganized the area summary section and corrected the net
      exports value (subtracted half of tie-line loss) to make the numbers
      add up correctly.

1/18/05
    - Added to runpf.m the ability to enforce generator reactive power limits
      by allowing the voltage to deviate from the set-point. This option is
      controlled by the new ENFORCE_Q_LIMS option, which is off by default.
          (Thanks to Mu Lin of Lincoln University, New Zealand
           whose contributions inspired this feature).
    - Modified pfsoln.m to divide reactive power dispatch between multiple
      generators at a bus in proportion to each gen's reactive power range,
      as opposed to equally. This means that all generators at a bus will
      reach their upper (or lower) limits simultaneously.
    - Added generator status column to generator section of printpf.m output.
      Fixed bugs where non-zero output of decommitted generators was displayed
      and included in generation totals in generator and bus sections.

1/14/05
    - Moved some setting of MNS_* default options from opf.m to mopf.m.
    - Eliminated unused output args in dcopf.m.
    - Modified printpf.m to zero out reactive generator output for DC cases
      and to use OPF_VIOLATION tolerance to detect binding constraints, as
      opposed to non-zero Kuhn-Tucker multipliers.

1/12/05
    - Modified bpmpd portion of mp_qp.m and mp_lp.m to use default value for
      TFEAS2 and eliminate variable limits which appear to be artificial
      large values used to indicate free variables.

1/4/05
    - Fixed potential bug in dimensions of Yf and Yt created in makeYbus.m.

12/17/04
    - Added feasibility check to mp_lp.m and mp_qp.m to work around a
      recently discovered bug in BPMPD_MEX 2.21 where it sometimes returns an
      incorrect (infeasible) solution for a DC OPF problem. This bug has yet
      to be encountered in any other context.

12/13/04
    - Added mpver.m to print version information.

9/23/04
    - Fixed bugs in cdf2matp.m which prevented it from working at all
      when not specifying both input parameters and caused it to
      sometimes not add the warnings at the end of the file.
    - Fixed typo in name of lower bound input argument in opf.m. Only
      affected those calling opf directly with extra linear constraints.


Changes since 3.0b2
-------------------

9/20/04
    - Released version 3.0b3.
    - Generated clean versions of all included case files using latest
      cdf2matp and savecase. Added documentation for source of data
      for case files.
    - More enhancements to cdf2matp.m. Adds comments at beginning, appends
      conversion warnings as comments at end of file. Uses savecase.m to
      save the data.
    - Updated savecase.m to use %g instead of %f many places, correctly
      handle multi-line comments, include headers for extra columns for
      solved cases. Optionally returns filename with extension.

9/17/04
    - Fixed bug in grad_std.m, introduced in 3.0b2, which prevented constr
      and LP-based OPF solvers from working for polynomial cost functions.

9/15/04
    - In cdf2matp.m, added input args, updated docs, switched to named
      indexing of data matrices, new method for creating gen costs.
    - Documentation fixes and additions from Pan Wei.


Changes since 3.0b1
-------------------

9/7/04
    - Released version 3.0b2.
    - Added OPF_P_LINE_LIM option to mpoptions to use active power
      instead of apparent power for line limits (thanks to Pan Wei
      for the suggestion and some code).

9/1/04
    - Fixed bug in savecase.m introduced when making areas and gencost
      optional.
    - Updated opf_slvr.m with options for MINOS and fmincon.
    - Removed option 15 OPF_NEQ from docs (not a user option). Removed option
      52 VAR_LOAD_PF (unused, always behaves as if this option were 1).
      Changed semantics and default value for option 51 SPARSE_QP. By default
      (value = 1) it will use sparse matrices if a sparse QP/LP solver is
      available and full matrices otherwise. Setting the value to 0
      will force it to use full matrices even with a sparse-capable solver.
    - Cleaned up checking for optional functionality, and fixed a bug
      that would miss MEX files if there was an identically named directory
      by adding have_fcn.m.
      

Changes since 2.0
-----------------

8/25/04
    - Released version 3.0b1.

8/24/04
    - Made mpoption() throw an error if passed an invalid option name.

8/23/04
    - Added an fmincon based OPF solver for the generalized formulation
      previously used by mopf (Carlos).
    - Restructured opf.m so all OPF solvers have a similar API based
      on the one from mopf.m (Carlos).
    - Added some quick tests for runpf and runopf for each algorithm.

8/13/04
    - Renamed 'area' variable to 'areas' to avoid masking the built-in
      function of the same name.
    - Made OPF data matrices 'areas' and 'gencost' optional for running
      simple power flow.

7/15/04
    - The loadcase function (and therefore all of the run* functions
      now optionally accept a struct with the data matrices as fields
      in place of the case file name.
    - Added t subdirectory with various tests and testing tools.

7/8/04
    - Updated mp_lp.m and mp_qp.m to try linprog() and quadprog()
      after trying bp, since lp() and qp() are no longer included
      in the Optimization Toolbox as of version 3.

7/7/04
    - Removed case.m, added caseformat.m, made case9.m the default
      case and fixed function names in other case files to avoid
      use of reserved word 'case'.
    - Fixed bugs in runcomp.m.

6/23/04
    - Fixed bug in newtonpf.m which caused algorithm to diverge when
      the Newton step resulted in a negative voltage magnitude.

4/17/03
    - Changed uopf.m to use a dynamic programming approach. More
      computationally expensive, but should find significanly better
      results when there are many gens to shut down.
    - Added mp_lp.m and mp_qp.m, equivalents to lp.m and qp.m,
      respectively that call bpmpd if available. Modified LPrelax.m,
      LPsetup.m and dcopf.m to call these new functions.

4/14/03
    - Fixed a bug in pfsoln.m which for cases with a single generator.

10/23/02
    - Fixed bus numbering bug in System Summary section of printpf.m.

6/20/00
    - Fixed a bug in printpf.m in the generator section, where
      the generator was assumed to be off if it's real power
      output was zero, even if the reactive output was non-zero.
    - Modified printpf.m to print out lambdas in generation section
      for generators that are shut down.

6/8/00
    - Modified cdf2matp.m so that Pd also includes any generation at
      buses specified as PQ buses. Also modified identification of
      generator buses to include only PV or reference buses. (Thanks
      to Venkat)
    - Modified cdf2matp.m so that it always treats the input values
      for Gs and Bs as per unit values and converts them to actual
      values expected by MATPOWER (Thanks to D. Devaraj)

version 2.5b3
11/9/99

9/22/99
    - Modified grad_*.m to return sparse matrices, unless using
      constr.m or an LP/QP solver that doesn't handle sparse
      matrices. Cleaned up sparse<->full conversions in LPconstr.m,
      LPrelax.m, and LPsetup.m.

9/21/99
    - Undid a "bug fix" from 3/6/98 in makeYbus.m which zeros out
      charging capacitance for transformers. Apparently some
      transformer models actually have a non-zero charging parameter
      when using the model used by MATPOWER (ideal transformer in
      series with a PI model).
    - Added loadcase.m which loads a MATPOWER case from an M-file
      or from a MAT-file. Changed all of the run*.m files to use this
      as the default way to load case files.
    - Renamed print2mp.m to savecase.m and added the ability to
      save a case as a MAT-file as well as an M-file.

9/15/99
    - Fixed opf.m so that it correctly uses the termination
      tolerances in the MATPOWER options vector for constr.m.
    - In previous versions, Pmin/Pmax constraints are relaxed by
      10 * OPF_VIOLATION in opf.m to avoid falsely reporting a
      binding Pmin/Pmax constraint in a case where a piece-wise linear
      cost function has a corner point exactly at the limit. This
      code was moved out of opf.m (and the standard MATPOWER
      distribution) to smartmkt.m and the value was changed to
      100 * OPF_VIOLATION.
    - Modified opf.m so the MINOS-based solver uses OPF_VIOLATION
      to set the value of MNS_FEASTOL and MNS_ROWTOL if they are
      set to zero.

9/9/99
    - Included MINOS-based OPF with all of its options as
      algorithm 500. (involved including 'area' in calls to opf.m
      and uopf.m)
    - Removed some unused lines from fun_ccv.m and grad_ccv.m.

8/5/99
    - Fixed a bug in the pfsoln.m in the distribution of Q among
      generators at the same bus. Initially attempted to distribute
      Q to generators proportional to each generators' Q "capacity".
      To do this correctly requires special cases for generators
      with QMIN equal to QMAX. For the sake of simplicity, we now
      distribute Q equally among all generators at the bus.
      Note: As before, the simple power flow does NO feasibility
      checking.

7/19/99
    - Modified runuopf.m and uopf.m to handle DC opf. Added the
      function runduopf.m which calls runuopf.m with the PF_DC flag
      set to 1.
    - Fixed size of 2nd order (all zero) coefficient of objective
      for piecewise linear cost case in dcopf.m.

7/16/99
    - Added the flag QP_SPARSE to mpoption.m to indicate whether the
      QP solver being used can accept sparse matrices. Also modified
      dcopf.m to use this flag.
    - Fixed handling of VERBOSE option in dcopf.m
    - Added the flag PF_DC to mpoption.m to indicate whether the
      power flow formulation to be used for power flow and optimal
      power flow is a DC approximation or full AC representation.
      Merged rundcpf.m with runpf.m and rundcopf.m with runopf.m
      so that the appropriate solver will be used based on the
      value of the PF_DC flag in the options. The functions rundcpf.m
      and rundcopf.m were modified to simply call runpf.m and
      runopf.m, respectively, with the PF_DC flag set to 1.

7/15/99
    - Changed the sign of the phase shifters in printpf.m to be
      consistent with the bug fix to makeYbus.m made on 3/6/98.

7/14/99
    - Included four new m-files (makeBdc.m, dcopf.m, rundcpf.m,
      and rundcopf.m) which implement a DC power flow and DC
      optimal power flow algorithms.

7/13/99
    - Cleaned up variable names in makeYbus to avoid confusion.

6/10/99
    - Changed UOFP to UOPF in print statements uopf.m.

6/3/99
    - Modified print2mp.m overwrite instead of append to an
      existing file.
    - Fixed bug in cdf2matp.m to make it always correctly write
      a text file output.

version 2.5b2
6/2/99
    - Modified print2mp.m to include line flows and Lagrange
      and Kuhn-Tucker multipliers in output if available.

4/29/99
    - Included a Gauss-Seidel power flow solver gausspf.m, and
      made corresponding changes to runpf.m and mpoption.m.
      Code contributed by Alberto Borghetti.

4/28/99
    - Modified newtonpf.m to handle cases with no PQ buses or no
      PV buses under newer versions of Matlab.

2/25/99
    - Fixed a bug in uopf.m which occurs when two (or more)
      generators have positive decommitment indices but shutting
      them down one at a time always results in increased system
      cost. In this scenario, it would go into an infinite loop
      of attempting to shut them down one by one.

2/24/99