📄 adc.lst
字号:
C166 COMPILER V6.02, ADC 08/08/2006 15:48:08 PAGE 1
C166 COMPILER V6.02, COMPILATION OF MODULE ADC
OBJECT MODULE PLACED IN ADC.OBJ
COMPILER INVOKED BY: C:\Keil\C166\BIN\C166.EXE ADC.C MODV2 BROWSE MODV2 DEBUG
stmt lvl source
1 //****************************************************************************
2 // @Module Analog / Digital Converter (ADC)
3 // @Filename ADC.C
4 // @Project T12_T13_AD_PEC.dav
5 //----------------------------------------------------------------------------
6 // @Controller Infineon XC164CM-8F40
7 //
8 // @Compiler Keil
9 //
10 // @Codegenerator 0.2
11 //
12 // @Description This file contains functions that use the ADC module.
13 //
14 //----------------------------------------------------------------------------
15 // @Date 2006-7-8 23:19:35
16 //
17 //****************************************************************************
18
19 // USER CODE BEGIN (ADC_General,1)
20
21 // USER CODE END
22
23
24
25 //****************************************************************************
26 // @Project Includes
27 //****************************************************************************
28
29 #include "MAIN.H"
30
31 // USER CODE BEGIN (ADC_General,2)
32
33 // USER CODE END
34
35
36 //****************************************************************************
37 // @Macros
38 //****************************************************************************
39
40 // USER CODE BEGIN (ADC_General,3)
41
42 // USER CODE END
43
44
45 //****************************************************************************
46 // @Defines
47 //****************************************************************************
48
49 // USER CODE BEGIN (ADC_General,4)
50
51 // USER CODE END
52
53
54 //****************************************************************************
55 // @Typedefs
C166 COMPILER V6.02, ADC 08/08/2006 15:48:08 PAGE 2
56 //****************************************************************************
57
58 // USER CODE BEGIN (ADC_General,5)
59
60 // USER CODE END
61
62
63 //****************************************************************************
64 // @Imported Global Variables
65 //****************************************************************************
66
67 // USER CODE BEGIN (ADC_General,6)
68
69 // USER CODE END
70
71
72 //****************************************************************************
73 // @Global Variables
74 //****************************************************************************
75
76 // USER CODE BEGIN (ADC_General,7)
77 unsigned int ADC_Result[10];
78 // USER CODE END
79
80
81 //****************************************************************************
82 // @External Prototypes
83 //****************************************************************************
84
85 // USER CODE BEGIN (ADC_General,8)
86
87 // USER CODE END
88
89
90 //****************************************************************************
91 // @Prototypes Of Local Functions
92 //****************************************************************************
93
94 // USER CODE BEGIN (ADC_General,9)
95
96 // USER CODE END
97
98
99 //****************************************************************************
100 // @Function void ADC_vInit(void)
101 //
102 //----------------------------------------------------------------------------
103 // @Description This is the initialization function of the ADC function
104 // library. It is assumed that the SFRs used by this library
105 // are in reset state.
106 //
107 //----------------------------------------------------------------------------
108 // @Returnvalue None
109 //
110 //----------------------------------------------------------------------------
111 // @Parameters None
112 //
113 //----------------------------------------------------------------------------
114 // @Date 2006-7-8
115 //
116 //****************************************************************************
117
C166 COMPILER V6.02, ADC 08/08/2006 15:48:08 PAGE 3
118 // USER CODE BEGIN (Init,1)
119
120 // USER CODE END
121
122 void ADC_vInit(void)
123 {
124 1 // USER CODE BEGIN (Init,2)
125 1
126 1 // USER CODE END
127 1
128 1 /// - enhanced mode is selected
129 1 /// - fixed channel single conversion mode is selected
130 1 /// - 10-bit resolution
131 1 /// - once converts channel 0
132 1 /// - ADC start bit is reset
133 1 /// - wait for ADDAT read mode is enabled
134 1 /// - converter basic clock tbc is fpd / 1
135 1 /// - sample time tsc is tbc * 8
136 1 /// - post calibration is enabled
137 1 /// - conversion time tc = 1.550 祍
138 1 /// - channel injection is enabled
139 1 /// - inject channel 0
140 1 /// - trigger input CCU6 selected
141 1 /// - resolution for injection mode is 10-bit
142 1 /// - converter basic clock tbc for injection mode is fpd / 1
143 1 /// - sample time tsc for injection mode is tbc * 8
144 1 /// - conversion time in injection mode tc = 1.550 祍
145 1
146 1 ADC_CTR0 = 0xA600; // load ADC control register 0
147 1
148 1 ADC_CTR2 = 0x0000; // load ADC control register 2
149 1
150 1 ADC_DAT2 = 0x0000; // load A/D converter 2 result register
151 1
152 1 ADC_CTR2IN = 0x0000; // load ADC injection control register 2
153 1
154 1
155 1
156 1 /// -----------------------------------------------------------------------
157 1 /// Configuration of the used ADC Interrupts:
158 1 /// -----------------------------------------------------------------------
159 1 /// Error service request node configuration:
160 1 /// - Error interrupt priority level (ILVL) = 12
161 1 /// - Error interrupt group level (GLVL) = 2
162 1 /// - Error group priority extension (GPX) = 0
163 1
164 1 ADC_EIC = 0x0072;
165 1
166 1 /// Use PEC channel 2 for ADC Error INT:
167 1 /// - decrement counter
168 1 /// - increment destination pointer
169 1 /// - transfer a word
170 1 /// - service End of PEC interrrupt by a EOP interrupt node is enabled
171 1 /// - End of PEC intrrupt request is enabled
172 1
173 1 PECC2 = 0x520A; // load PECC2 control register
174 1
175 1 SRCP2 = _sof_(&ADC_DAT2); //set source pointer
*** WARNING C98 IN LINE 175 OF ADC.C: parameter 1: pointer to different objects
176 1
177 1 //// - DESTINATION-POINTER for PECC channel 2 is set because it is selected
178 1 //// for user defined
C166 COMPILER V6.02, ADC 08/08/2006 15:48:08 PAGE 4
179 1 DSTP2 = _sof_(0x0000); //set destination pointer
180 1
181 1
182 1 /// -----------------------------------------------------------------------
183 1 /// Configuration of the used ADC Port Pins:
184 1 /// -----------------------------------------------------------------------
185 1 /// - P5.0 is used for Analog Input Pin (AN0)
186 1
187 1 /// - digital input stage is disconnected from port line P5.0
188 1
189 1 P5DIDIS = 0x0001; // load Port 5 digital input disable register
190 1
191 1
192 1
193 1 // USER CODE BEGIN (Init,3)
194 1 DSTP2 = _sof_(ADC_Result); //set destination pointer
*** WARNING C98 IN LINE 194 OF ADC.C: parameter 1: pointer to different objects
195 1 // USER CODE END
196 1
197 1 } // End of function ADC_vInit
198
199
200 //****************************************************************************
201 // @Function void ADC_viError(void)
202 //
203 //----------------------------------------------------------------------------
204 // @Description This is the interrupt service routine for the overwrite
205 // error of the ADC (in standard mode) - the last measurement
206 // result was overwritten - , or the ISR for the end of an
207 // injected conversion - the result of the injected conversion
208 // has beenwritten to ADC_DAT2. An overrun is not possible in
209 // channel injection mode; in this case the A/D measurement is
210 // stopped. To get the injected conversion result the user can
211 // call the function ADC_uwReadInject().
212 // Please note that you have to add application specific code
213 // to this function.
214 //
215 //----------------------------------------------------------------------------
216 // @Returnvalue None
217 //
218 //----------------------------------------------------------------------------
219 // @Parameters None
220 //
221 //----------------------------------------------------------------------------
222 // @Date 2006-7-8
223 //
224 //****************************************************************************
225
226 // USER CODE BEGIN (Error,1)
227
228 // USER CODE END
229
230 void ADC_viError(void) interrupt ADC_E_INT
231 {
232 1 // USER CODE BEGIN (Error,2)
233 1
234 1 // USER CODE END
235 1
236 1 } // End of function ADC_viError
237
238
239
C166 COMPILER V6.02, ADC 08/08/2006 15:48:08 PAGE 5
240
241 // USER CODE BEGIN (ADC_General,10)
242
243 // USER CODE END
244
MODULE INFORMATION: INITIALIZED UNINITIALIZED
CODE SIZE = 56 --------
NEAR-CONST SIZE = -------- --------
FAR-CONST SIZE = -------- --------
HUGE-CONST SIZE = -------- --------
XHUGE-CONST SIZE = -------- --------
NEAR-DATA SIZE = 20 --------
FAR-DATA SIZE = -------- --------
XHUGE-DATA SIZE = -------- --------
IDATA-DATA SIZE = -------- --------
SDATA-DATA SIZE = -------- --------
BDATA-DATA SIZE = -------- --------
HUGE-DATA SIZE = -------- --------
BIT SIZE = -------- --------
INIT'L SIZE = -------- --------
END OF MODULE INFORMATION.
C166 COMPILATION COMPLETE. 2 WARNING(S), 0 ERROR(S)
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -