c_l

MIPS处理器的bootloader,龙芯就是用的修改过的PMON2

The l Command
l



The l command disassembles instructions from memory.

Format

The format for the l command is:


l [-bctT] [adr [cnt]]


where:


-b	lists only branches.

-c	lists only calls.

-t	lists the trace buffer.

-T	assume TinyRISC (MIPS16) instructions.

adr	is the base address from which to disassemble instructions.

cnt	is the number of lines to disassemble.


When invoking this command with no options, disassembly starts at the 
address in the EPC register and is output to the more command.


Functional Description

The l command disassembles the memory contents, starting either at the
EPC register's current value or at the specified address. The output of
this command is passed to the more command, letting the user view one
screenful of disassembled output at a time. Optionally, the user can
specify a count value, which limits the number of disassembled lines to
that number.  

The regstyle Variable 

The regstyle environment variable determines whether the Monitor displays hardware or software register
names. Hardware register names are simply $0 through $31. Software
registers are defined by the MIPS software conventions. Set regstyle to
"hw" for hardware register names. Set regstyle to "sw" for software
register names.  

Examples illustrating the use of the l command follow.


PMON> set regstyle sw 			Normally the default. 

PMON> l 9fc00240
Pmon+0x240 3c09a07f lui 	t1,0xa07f 
Pmon+0x244 3c08003c lui 	t0,0x3c
Pmon+0x248 3529ff20 ori 	t1,t1,0xff20 
Pmon+0x24c 3508c62f ori 	t0,t0,0xc62f 
Pmon+0x250 ad280000 sw 		t0,0(t1) 
Pmon+0x254 3c09a07f lui 	t1,0xa07f 
Pmon+0x258 3529ff10 ori 	t1,t1,0xff10 
Pmon+0x25c 24080025 addiu 	t0,zero,0x25 
Pmon+0x260 ad280000 sw 		t0,0(t1) 
Pmon+0x264 3c020040 lui 	v0,0x40 

PMON> set regstyle hw 
PMON> l 9fc00264 B
Pmon+0x264 3c020040 lui 	$2,0x40 
Pmon+0x268 40826000 mtc0 	$2,$12 
Pmon+0x26c 40806800 mtc0 	$0,$13 
Pmon+0x270 3c1d8001 lui 	$29,0x8001
Pmon+0x274 27bd8b40 addiu 	$29,$29,0x8b40 
Pmon+0x278 3c01a000 lui 	$1,0xa000 
Pmon+0x27c 03a1e825 or 		$29,$29,$1
Pmon+0x280 0ff005bc jal 	flush_cache 
Pmon+0x284 24040000 addiu 	$4,$0,0x0 
Pmon+0x288 0ff005bc jal 	flush_cache
Pmon+0x28c 24040001 addiu 	$4,$0,0x1


Files
The l command is located in mon/dis.c.

See Also
d command,
m command,
dump command,
more and 
rdsrec commands.


Navigation: 
Document Home | 
Document Contents | 
Document Index