⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 in_pcb.h

📁 MIPS处理器的bootloader,龙芯就是用的修改过的PMON2
💻 H
字号:
/*	$OpenBSD: in_pcb.h,v 1.17 1999/03/27 21:04:19 provos Exp $	*//*	$NetBSD: in_pcb.h,v 1.14 1996/02/13 23:42:00 christos Exp $	*//* * Copyright (c) 1982, 1986, 1990, 1993 *	The Regents of the University of California.  All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright *    notice, this list of conditions and the following disclaimer in the *    documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software *    must display the following acknowledgement: *	This product includes software developed by the University of *	California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors *    may be used to endorse or promote products derived from this software *    without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * *	@(#)in_pcb.h	8.1 (Berkeley) 6/10/93 */#include <sys/queue.h>#ifdef IP6#include <netinet6/ipv6.h>#include <netinet6/ipv6_var.h>#include <netinet6/icmpv6.h>#endif#include <netinet/ip_ipsp.h>union inpaddru {	struct in6_addr iau_addr6;	struct {		uint8_t pad[12];		struct in_addr inaddr;	/* easier transition */	} iau_a4u;};/* * Common structure pcb for internet protocol implementation. * Here are stored pointers to local and foreign host table * entries, local and foreign socket numbers, and pointers * up (to a socket structure) and down (to a protocol-specific) * control block. */struct inpcb {	LIST_ENTRY(inpcb) inp_hash;	CIRCLEQ_ENTRY(inpcb) inp_queue;	struct	  inpcbtable *inp_table;	union	  inpaddru inp_faddru;		/* Foreign address. */	union	  inpaddru inp_laddru;		/* Local address. */#define	inp_faddr	inp_faddru.iau_a4u.inaddr#define	inp_faddr6	inp_faddru.iau_addr6#define	inp_laddr	inp_laddru.iau_a4u.inaddr#define	inp_laddr6	inp_laddru.iau_addr6	u_int16_t inp_fport;		/* foreign port */	u_int16_t inp_lport;		/* local port */	struct	  socket *inp_socket;	/* back pointer to socket */	caddr_t	  inp_ppcb;		/* pointer to per-protocol pcb */	union {				/* Route (notice increased size). */		struct route ru_route;#ifdef IP6		struct route6 ru_route6;#endif	} inp_ru;#define	inp_route	inp_ru.ru_route#define	inp_route6	inp_ru.ru_route6	int	  inp_flags;		/* generic IP/datagram flags */	union {				/* Header prototype. */		struct ip hu_ip;#ifdef IP6		struct ipv6 hu_ipv6;#endif	} inp_hu;#define	inp_ip		inp_hu.hu_ip#define	inp_ipv6	inp_hu.hu_ipv6	struct	  mbuf *inp_options;	/* IP options */	union {		struct ip_moptions *mou_mo;    /* IPv4 multicast options */		struct ipv6_moptions *mou_mo6; /* IPv6 multicast options */	} inp_mou;#define inp_moptions inp_mou.mou_mo#define inp_moptions6 inp_mou.mou_mo6	u_char	  inp_seclevel[3];	/* Only the first 3 are used for now */#define SL_AUTH           0             /* Authentication level */#define SL_ESP_TRANS      1             /* ESP transport level */#define SL_ESP_NETWORK    2             /* ESP network (encapsulation) level */	u_int8_t  inp_secrequire:4,     /* Condensed State from above */	          inp_secresult:4;	/* Result from Key Management */#define SR_FAILED         1             /* Negotiation failed permanently */#define SR_SUCCESS        2             /* SA successfully established */#define SR_WAIT           3             /* Waiting for SA */	TAILQ_ENTRY(inpcb) inp_tdb_next;	struct tdb     *inp_tdb;	/* If tdb_dst matches our dst, use */	int	inp_fflowinfo;          /* Foreign flowlabel & priority */	int	inp_csumoffset;#if IP6	struct	icmpv6_filter inp_filter;#endif};struct inpcbtable {	CIRCLEQ_HEAD(, inpcb) inpt_queue;	LIST_HEAD(inpcbhead, inpcb) *inpt_hashtbl;	u_long	  inpt_hash;	u_int16_t inpt_lastport;};/* flags in inp_flags: */#define	INP_RECVOPTS	0x001	/* receive incoming IP options */#define	INP_RECVRETOPTS	0x002	/* receive IP options for reply */#define	INP_RECVDSTADDR	0x004	/* receive IP dst address */#define	INP_RXDSTOPTS	INP_RECVOPTS#define	INP_RXHOPOPTS	INP_RECVRETOPTS#define	INP_RXINFO	INP_RECVDSTADDR#define	INP_RXSRCRT	0x010#define	INP_HOPLIMIT	0x020#define	INP_CONTROLOPTS	(INP_RECVOPTS|INP_RECVRETOPTS|INP_RECVDSTADDR| \	    INP_RXSRCRT|INP_HOPLIMIT)#define	INP_HDRINCL	0x008	/* user supplies entire IP header */#define	INP_HIGHPORT	0x010	/* user wants "high" port binding */#define	INP_LOWPORT	0x020	/* user wants "low" port binding *//* * These flags' values should be determined by either the transport * protocol at PRU_BIND, PRU_LISTEN, PRU_CONNECT, etc, or by in_pcb*(). */#define	INP_IPV6	0x100	/* sotopf(inp->inp_socket) == PF_INET6 */#define	INP_IPV6_UNDEC	0x200	/* PCB is PF_INET6, but listens for V4/V6 */#define	INP_IPV6_MAPPED	0x400	/* PF_INET6 PCB which is connected to				 * an IPv4 host, or is bound to				 * an IPv4 address (specified with				 * the mapped form of v6 addresses) */#define INP_IPV6_MCAST	0x800	/* Set if inp_moptions points to ipv6 ones */#define	INPLOOKUP_WILDCARD	1#define	INPLOOKUP_SETLOCAL	2#define	INPLOOKUP_IPV6		4#define	sotoinpcb(so)	((struct inpcb *)(so)->so_pcb)/* macros for handling bitmap of ports not to allocate dynamically */#define	DP_MAPBITS	(sizeof(u_int32_t) * NBBY)#define	DP_MAPSIZE	(howmany(IPPORT_RESERVED/2, DP_MAPBITS))#define	DP_SET(m, p)	((m)[((p) - IPPORT_RESERVED/2) / DP_MAPBITS] |= (1 << ((p) % DP_MAPBITS)))#define	DP_CLR(m, p)	((m)[((p) - IPPORT_RESERVED/2) / DP_MAPBITS] &= ~(1 << ((p) % DP_MAPBITS)))#define	DP_ISSET(m, p)	((m)[((p) - IPPORT_RESERVED/2) / DP_MAPBITS] & (1 << ((p) % DP_MAPBITS)))/* default values for baddynamicports [see ip_init()] */#define	DEFBADDYNAMICPORTS_TCP	{ 749, 750, 751, 760, 761, 871, 0 }#define	DEFBADDYNAMICPORTS_UDP	{ 750, 751, 0 }struct baddynamicports {	u_int32_t tcp[DP_MAPSIZE];	u_int32_t udp[DP_MAPSIZE];};#ifdef _KERNEL#define sotopf(so)  (so->so_proto->pr_domain->dom_family)void	 in_losing __P((struct inpcb *));int	 in_pcballoc __P((struct socket *, void *));int	 in_pcbbind __P((void *, struct mbuf *));int	 in_pcbconnect __P((void *, struct mbuf *));void	 in_pcbdetach __P((void *));void	 in_pcbdisconnect __P((void *));struct inpcb *	 in_pcbhashlookup __P((struct inpcbtable *, struct in_addr,			       u_int, struct in_addr, u_int));#ifdef INET6struct inpcb *	 in6_pcbhashlookup __P((struct inpcbtable *, struct in6_addr *,			       u_int, struct in6_addr *, u_int));int	 in6_pcbbind __P((struct inpcb *, struct mbuf *));int	 in6_pcbconnect __P((struct inpcb *, struct mbuf *));int	 in6_setsockaddr __P((struct inpcb *, struct mbuf *));int	 in6_setpeeraddr __P((struct inpcb *, struct mbuf *));#endif /* INET6 */void	 in_pcbinit __P((struct inpcbtable *, int));struct inpcb *	 in_pcblookup __P((struct inpcbtable *, void *, u_int, void *,	    u_int, int));void	 in_pcbnotify __P((struct inpcbtable *, struct sockaddr *,	    u_int, struct in_addr, u_int, int, void (*)(struct inpcb *, int)));void	 in_pcbnotifyall __P((struct inpcbtable *, struct sockaddr *,	    int, void (*)(struct inpcb *, int)));void	 in_pcbrehash __P((struct inpcb *));void	 in_rtchange __P((struct inpcb *, int));void	 in_setpeeraddr __P((struct inpcb *, struct mbuf *));void	 in_setsockaddr __P((struct inpcb *, struct mbuf *));int	 in_baddynamic __P((u_int16_t, u_int16_t));#endif

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -