⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 ata_wdc.c

📁 MIPS处理器的bootloader,龙芯就是用的修改过的PMON2
💻 C
📖 第 1 页 / 共 2 页
字号:
/*	$NetBSD: ata_wdc.c,v 1.21 1999/08/09 09:43:11 bouyer Exp $	*//* * Copyright (c) 1998 Manuel Bouyer. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright *    notice, this list of conditions and the following disclaimer in the *    documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software *    must display the following acknowledgement: *	This product includes software developed by the University of *	California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors *    may be used to endorse or promote products derived from this software *    without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * *//*- * Copyright (c) 1998 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Charles M. Hannum, by Onno van der Linden and by Manuel Bouyer. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright *    notice, this list of conditions and the following disclaimer in the *    documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software *    must display the following acknowledgement: *        This product includes software developed by the NetBSD *        Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its *    contributors may be used to endorse or promote products derived *    from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */#include <sys/param.h>#include <sys/systm.h>#include <sys/kernel.h>#include <sys/file.h>#include <sys/stat.h>#include <sys/buf.h>#include <sys/malloc.h>#include <sys/device.h>#include <sys/disklabel.h>#include <sys/syslog.h>#include <sys/proc.h>#include <machine/intr.h>#include <machine/bus.h>#include <dev/ata/atareg.h>#include <dev/ata/atavar.h>#include <dev/ic/wdcreg.h>#include <dev/ic/wdcvar.h>#include <dev/ata/wdvar.h>#define DEBUG_INTR   0x01#define DEBUG_XFERS  0x02#define DEBUG_STATUS 0x04#define DEBUG_FUNCS  0x08#define DEBUG_PROBE  0x10#ifdef WDCDEBUGint wdcdebug_wd_mask = 0x1f;#define WDCDEBUG_PRINT(args, level) \	if (wdcdebug_wd_mask & (level)) \		printf args#else#define WDCDEBUG_PRINT(args, level)#endif#define ATA_DELAY 10000 /* 10s for a drive I/O */#ifdef __OpenBSD__struct cfdriver wdc_cd = {	NULL, "wdc", DV_DULL};#endifvoid  wdc_ata_bio_start  __P((struct channel_softc *,struct wdc_xfer *));void  _wdc_ata_bio_start  __P((struct channel_softc *,struct wdc_xfer *));int   wdc_ata_bio_intr   __P((struct channel_softc *, struct wdc_xfer *, int));void  wdc_ata_bio_kill_xfer __P((struct channel_softc *,struct wdc_xfer *));void  wdc_ata_bio_done   __P((struct channel_softc *, struct wdc_xfer *)); int   wdc_ata_ctrl_intr __P((struct channel_softc *, struct wdc_xfer *, int));int   wdc_ata_err __P((struct ata_drive_datas *, struct ata_bio *));#define WDC_ATA_NOERR 0x00 /* Drive doesn't report an error */#define WDC_ATA_RECOV 0x01 /* There was a recovered error */#define WDC_ATA_ERR   0x02 /* Drive reports an error *//* * Handle block I/O operation. Return WDC_COMPLETE, WDC_QUEUED, or * WDC_TRY_AGAIN. Must be called at splio(). */intwdc_ata_bio(drvp, ata_bio)	struct ata_drive_datas *drvp;	struct ata_bio *ata_bio;{	struct wdc_xfer *xfer;	struct channel_softc *chp = drvp->chnl_softc;	xfer = wdc_get_xfer(WDC_NOSLEEP);	if (xfer == NULL)		return WDC_TRY_AGAIN;	if (ata_bio->flags & ATA_POLL)		xfer->c_flags |= C_POLL;#ifndef PMON	if ((drvp->drive_flags & (DRIVE_DMA | DRIVE_UDMA)) &&	    (ata_bio->flags & ATA_SINGLE) == 0)		xfer->c_flags |= C_DMA;#endif	xfer->drive = drvp->drive;	xfer->cmd = ata_bio;	xfer->databuf = ata_bio->databuf;	xfer->c_bcount = ata_bio->bcount;	xfer->c_start = wdc_ata_bio_start;	xfer->c_intr = wdc_ata_bio_intr;	xfer->c_kill_xfer = wdc_ata_bio_kill_xfer;	wdc_exec_xfer(chp, xfer);	return (ata_bio->flags & ATA_ITSDONE) ? WDC_COMPLETE : WDC_QUEUED;}voidwdc_ata_bio_start(chp, xfer)	struct channel_softc *chp;	struct wdc_xfer *xfer;{#ifndef PMON	struct ata_bio *ata_bio = xfer->cmd;	WDCDEBUG_PRINT(("wdc_ata_bio_start %s:%d:%d\n",	    chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive),	    DEBUG_XFERS);	/* start timeout machinery */	if ((ata_bio->flags & ATA_POLL) == 0)		timeout(wdctimeout, chp, ATA_DELAY / 1000 * hz);#endif /*PMON*/	_wdc_ata_bio_start(chp, xfer);}void_wdc_ata_bio_start(chp, xfer)	struct channel_softc *chp;	struct wdc_xfer *xfer;{	struct ata_bio *ata_bio = xfer->cmd;	struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];	u_int16_t cyl;	u_int8_t head, sect, cmd = 0;	int nblks;	int ata_delay;#ifndef PMON	int dma_flags = 0;#endif	WDCDEBUG_PRINT(("_wdc_ata_bio_start %s:%d:%d\n",	    chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive),	    DEBUG_INTR | DEBUG_XFERS);	/* Do control operations specially. */	if (drvp->state < READY) {		/*		 * Actually, we want to be careful not to mess with the control		 * state if the device is currently busy, but we can assume		 * that we never get to this point if that's the case.		 */		/* at this point, we should only be in RECAL state */		if (drvp->state != RECAL) {			printf("%s:%d:%d: bad state %d in _wdc_ata_bio_start\n",			    chp->wdc->sc_dev.dv_xname, chp->channel,			    xfer->drive, drvp->state);			panic("_wdc_ata_bio_start: bad state");		}		xfer->c_intr = wdc_ata_ctrl_intr;		CHP_WRITE_REG(chp, wdr_sdh, WDSD_IBM | (xfer->drive << 4));		if (wdcwait(chp, WDCS_DRDY, WDCS_DRDY, ATA_DELAY) != 0)			goto timeout;		wdccommandshort(chp, xfer->drive, WDCC_RECAL);		drvp->state = RECAL_WAIT;		if ((ata_bio->flags & ATA_POLL) == 0) {			chp->ch_flags |= WDCF_IRQ_WAIT;		} else {			/* Wait for at last 400ns for status bit to be valid */			DELAY(1);			wdc_ata_ctrl_intr(chp, xfer, 0);		}		return;	}#ifndef PMON	if (xfer->c_flags & C_DMA) {		dma_flags = (ata_bio->flags & ATA_READ) ?  WDC_DMA_READ : 0;		dma_flags |= (ata_bio->flags & ATA_POLL) ?  WDC_DMA_POLL : 0;	}#endif	if (ata_bio->flags & ATA_SINGLE)		ata_delay = ATA_DELAY;	else		ata_delay = ATA_DELAY; again:	/*	 *	 * When starting a multi-sector transfer, or doing single-sector	 * transfers...	 */	if (xfer->c_skip == 0 || (ata_bio->flags & ATA_SINGLE) != 0) {		if (ata_bio->flags & ATA_SINGLE)			nblks = 1;		else 			nblks = xfer->c_bcount / ata_bio->lp->d_secsize;		/* Check for bad sectors and adjust transfer, if necessary. */		if ((ata_bio->lp->d_flags & D_BADSECT) != 0) {			long blkdiff;			int i;			for (i = 0; (blkdiff = ata_bio->badsect[i]) != -1;			     i++) {				blkdiff -= ata_bio->blkno;				if (blkdiff < 0)					continue;				if (blkdiff == 0) {					/* Replace current block of transfer. */					ata_bio->blkno =					    ata_bio->lp->d_secperunit -					    ata_bio->lp->d_nsectors - i - 1;				}				if (blkdiff < nblks) {					/* Bad block inside transfer. */					ata_bio->flags |= ATA_SINGLE;					nblks = 1;				}				break;			}			/* Transfer is okay now. */		}		if (ata_bio->flags & ATA_LBA) {			sect = (ata_bio->blkno >> 0) & 0xff;			cyl = (ata_bio->blkno >> 8) & 0xffff;			head = (ata_bio->blkno >> 24) & 0x0f;			head |= WDSD_LBA;		} else {			int blkno = ata_bio->blkno;			sect = blkno % ata_bio->lp->d_nsectors;			sect++;    /* Sectors begin with 1, not 0. */			blkno /= ata_bio->lp->d_nsectors;			head = blkno % ata_bio->lp->d_ntracks;			blkno /= ata_bio->lp->d_ntracks;			cyl = blkno;			head |= WDSD_CHS;		}#ifndef PMON		if (xfer->c_flags & C_DMA) {			ata_bio->nblks = nblks;			ata_bio->nbytes = xfer->c_bcount;			cmd = (ata_bio->flags & ATA_READ) ?			    WDCC_READDMA : WDCC_WRITEDMA;			nblks = ata_bio->nblks;	    		/* Init the DMA channel. */			if ((*chp->wdc->dma_init)(chp->wdc->dma_arg,			    chp->channel, xfer->drive,			    (char *)xfer->databuf + xfer->c_skip, 			    ata_bio->nbytes, dma_flags) != 0) {				ata_bio->error = ERR_DMA;				ata_bio->r_error = 0;				wdc_ata_bio_done(chp, xfer);				return;			}			/* Initiate command */			CHP_WRITE_REG(chp, wdr_sdh, 			    WDSD_IBM | (xfer->drive << 4));			if (wait_for_ready(chp, ata_delay) < 0)				goto timeout;			wdccommand(chp, xfer->drive, cmd, cyl,			    head, sect, nblks, 0);			/* start the DMA channel */			(*chp->wdc->dma_start)(chp->wdc->dma_arg,			    chp->channel, xfer->drive, dma_flags);			/* wait for irq */			goto intr;		} /* else not DMA */#endif		ata_bio->nblks = min(nblks, ata_bio->multi);		ata_bio->nbytes = ata_bio->nblks * ata_bio->lp->d_secsize;		if (ata_bio->nblks > 1 && (ata_bio->flags & ATA_SINGLE) == 0) {			cmd = (ata_bio->flags & ATA_READ) ?			    WDCC_READMULTI : WDCC_WRITEMULTI;		} else {			cmd = (ata_bio->flags & ATA_READ) ?			    WDCC_READ : WDCC_WRITE;		}		/* Initiate command! */		CHP_WRITE_REG(chp, wdr_sdh, WDSD_IBM | (xfer->drive << 4));		if (wait_for_ready(chp, ata_delay) < 0)			goto timeout;		wdccommand(chp, xfer->drive, cmd, cyl,		    head, sect, nblks, 		    (ata_bio->lp->d_type == DTYPE_ST506) ?		    ata_bio->lp->d_precompcyl / 4 : 0);	} else if (ata_bio->nblks > 1) {		/* The number of blocks in the last stretch may be smaller. */		nblks = xfer->c_bcount / ata_bio->lp->d_secsize;		if (ata_bio->nblks > nblks) {			ata_bio->nblks = nblks;			ata_bio->nbytes = xfer->c_bcount;		}	}	/* If this was a write and not using DMA, push the data. */	if ((ata_bio->flags & ATA_READ) == 0) {		if (wait_for_drq(chp, ata_delay) != 0) {			printf("%s:%d:%d: timeout waiting for DRQ, "			    "st=0x%02x, err=0x%02x\n",			    chp->wdc->sc_dev.dv_xname, chp->channel,			    xfer->drive, chp->ch_status, chp->ch_error);			if (wdc_ata_err(drvp, ata_bio) != WDC_ATA_ERR)				ata_bio->error = TIMEOUT;			wdc_ata_bio_done(chp, xfer);			return;		}		if (wdc_ata_err(drvp, ata_bio) == WDC_ATA_ERR) {			wdc_ata_bio_done(chp, xfer);			return;		}		wdc_output_bytes(drvp, (char *)xfer->databuf + xfer->c_skip,		    ata_bio->nbytes);	}#ifndef PMON intr:	/* Wait for IRQ (either real or polled) */#endif	if ((ata_bio->flags & ATA_POLL) == 0) {		chp->ch_flags |= WDCF_IRQ_WAIT;	} else {		/* Wait for at last 400ns for status bit to be valid */		delay(1);		wdc_ata_bio_intr(chp, xfer, 0);		if ((ata_bio->flags & ATA_ITSDONE) == 0)			goto again;	}	return; timeout:	printf("%s:%d:%d: not ready, st=0x%02x, err=0x%02x\n",	    chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive,	    chp->ch_status, chp->ch_error);	if (wdc_ata_err(drvp, ata_bio) != WDC_ATA_ERR)		ata_bio->error = TIMEOUT;	wdc_ata_bio_done(chp, xfer);	return;}intwdc_ata_bio_intr(chp, xfer, irq)	struct channel_softc *chp;	struct wdc_xfer *xfer;	int irq;{	struct ata_bio *ata_bio = xfer->cmd;	struct ata_drive_datas *drvp = &chp->ch_drive[xfer->drive];	int drv_err;#ifndef PMON	int dma_flags = 0;#endif	WDCDEBUG_PRINT(("wdc_ata_bio_intr %s:%d:%d\n",	    chp->wdc->sc_dev.dv_xname, chp->channel, xfer->drive),	    DEBUG_INTR | DEBUG_XFERS);	/* Is it not a transfer, but a control operation? */	if (drvp->state < READY) {

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -