30

Unix/Linux 网络时间协议版本3 Network Time Protocol Version 3 (NTP) distribution for Unix systems

# ADD BASE CPP /nologo /ML /W3 /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /FR /YX /c
# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /I "..\include" /D "_DEBUG" /D "DEBUG" /D "WIN32" /D "_CONSOLE" /D "SYS_WINNT" /D "DES" /D "MD5" /D "NTP_LITTLE_ENDIAN" /D "SYSLOG_FILE" /FR /YX /c
CPP_PROJ=/nologo /MTd /W3 /Gm /GX /Zi /Od /I "..\include" /D "_DEBUG" /D\
 "DEBUG" /D "WIN32" /D "_CONSOLE" /D "SYS_WINNT" /D "DES" /D "MD5" /D\
 "NTP_LITTLE_ENDIAN" /D "SYSLOG_FILE" /FR"$(INTDIR)/" /Fp"$(INTDIR)/ntpq.pch"\
 /YX /Fo"$(INTDIR)/" /Fd"$(INTDIR)/" /c 
CPP_OBJS=.\WinDebug/
CPP_SBRS=.\WinDebug/
# ADD BASE RSC /l 0x409 /d "_DEBUG"
# ADD RSC /l 0x409 /d "_DEBUG"
BSC32=bscmake.exe
# ADD BASE BSC32 /nologo
# ADD BSC32 /nologo
BSC32_FLAGS=/nologo /o"$(OUTDIR)/ntpq.bsc" 
BSC32_SBRS= \
	".\WinDebug\version.sbr" \
	".\WinDebug\ntpq.sbr" \
	".\WinDebug\ntpq_ops.sbr"

"$(OUTDIR)\ntpq.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
    $(BSC32) @<<
  $(BSC32_FLAGS) $(BSC32_SBRS)
<<

LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386
# ADD LINK32 wsock32.lib winmm.lib ..\libntp\WinDebug\libntp.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:console /debug /machine:I386
LINK32_FLAGS=wsock32.lib winmm.lib ..\libntp\WinDebug\libntp.lib kernel32.lib\
 user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib\
 ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:console /incremental:yes\
 /pdb:"$(OUTDIR)/ntpq.pdb" /debug /machine:I386 /out:"$(OUTDIR)/ntpq.exe" 
LINK32_OBJS= \
	".\WinDebug\version.obj" \
	".\WinDebug\ntpq.obj" \
	".\WinDebug\ntpq_ops.obj"

"$(OUTDIR)\ntpq.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
    $(LINK32) @<<
  $(LINK32_FLAGS) $(LINK32_OBJS)
<<

!ENDIF 

.c{$(CPP_OBJS)}.obj:
   $(CPP) $(CPP_PROJ) $<  

.cpp{$(CPP_OBJS)}.obj:
   $(CPP) $(CPP_PROJ) $<  

.cxx{$(CPP_OBJS)}.obj:
   $(CPP) $(CPP_PROJ) $<  

.c{$(CPP_SBRS)}.sbr:
   $(CPP) $(CPP_PROJ) $<  

.cpp{$(CPP_SBRS)}.sbr:
   $(CPP) $(CPP_PROJ) $<  

.cxx{$(CPP_SBRS)}.sbr:
   $(CPP) $(CPP_PROJ) $<  

################################################################################
# Begin Target

# Name "ntpq - Win32 Release"
# Name "ntpq - Win32 Debug"

!IF  "$(CFG)" == "ntpq - Win32 Release"

!ELSEIF  "$(CFG)" == "ntpq - Win32 Debug"

!ENDIF 

################################################################################
# Begin Source File

SOURCE=.\ntpq.c

"$(INTDIR)\ntpq.obj" : $(SOURCE) "$(INTDIR)"

"$(INTDIR)\ntpq.sbr" : $(SOURCE) "$(INTDIR)"


# End Source File
################################################################################
# Begin Source File

SOURCE=.\version.c

"$(INTDIR)\version.obj" : $(SOURCE) "$(INTDIR)"

"$(INTDIR)\version.sbr" : $(SOURCE) "$(INTDIR)"


# End Source File
################################################################################
# Begin Source File

SOURCE=.\ntpq_ops.c

"$(INTDIR)\ntpq_ops.obj" : $(SOURCE) "$(INTDIR)"

"$(INTDIR)\ntpq_ops.sbr" : $(SOURCE) "$(INTDIR)"


# End Source File
# End Target
# End Project
################################################################################

--------------238829B63AB9
Content-Type: text/plain; charset=us-ascii; name="Ntptrace.mak"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename="Ntptrace.mak"

# Microsoft Developer Studio Generated NMAKE File, Format Version 4.00
# ** DO NOT EDIT **

# TARGTYPE "Win32 (x86) Console Application" 0x0103

!IF "$(CFG)" == ""
CFG=ntptrace - Win32 Debug
!MESSAGE No configuration specified.  Defaulting to ntptrace - Win32 Debug.
!ENDIF 

!IF "$(CFG)" != "ntptrace - Win32 Release" && "$(CFG)" !=\
 "ntptrace - Win32 Debug"
!MESSAGE Invalid configuration "$(CFG)" specified.
!MESSAGE You can specify a configuration when running NMAKE on this makefile
!MESSAGE by defining the macro CFG on the command line.  For example:
!MESSAGE 
!MESSAGE NMAKE /f "ntptrace.mak" CFG="ntptrace - Win32 Debug"
!MESSAGE 
!MESSAGE Possible choices for configuration are:
!MESSAGE 
!MESSAGE "ntptrace - Win32 Release" (based on\
 "Win32 (x86) Console Application")
!MESSAGE "ntptrace - Win32 Debug" (based on "Win32 (x86) Console Application")
!MESSAGE 
!ERROR An invalid configuration is specified.
!ENDIF 

!IF "$(OS)" == "Windows_NT"
NULL=
!ELSE 
NULL=nul
!ENDIF 
################################################################################
# Begin Project
# PROP Target_Last_Scanned "ntptrace - Win32 Debug"
CPP=cl.exe
RSC=rc.exe

!IF  "$(CFG)" == "ntptrace - Win32 Release"

# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 0
# PROP BASE Output_Dir "WinRel"
# PROP BASE Intermediate_Dir "WinRel"
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 0
# PROP Output_Dir "WinRel"
# PROP Intermediate_Dir "WinRel"
OUTDIR=.\WinRel
INTDIR=.\WinRel

ALL : "$(OUTDIR)\ntptrace.exe" "$(OUTDIR)\ntptrace.bsc"

CLEAN : 
	-@erase ".\WinRel\ntptrace.bsc"
	-@erase ".\WinRel\ntptrace.sbr"
	-@erase ".\WinRel\version.sbr"
	-@erase ".\WinRel\ntptrace.exe"
	-@erase ".\WinRel\ntptrace.obj"
	-@erase ".\WinRel\version.obj"
	-@erase ".\WinRel\ntptrace.ilk"

"$(OUTDIR)" :
    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"

# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /FR /YX /c
# ADD CPP /nologo /MT /W3 /GX /O2 /I "..\include" /D "NDEBUG" /D "SYS_WINNT" /FR /YX /c
CPP_PROJ=/nologo /MT /W3 /GX /O2 /I "..\include" /D "NDEBUG" /D "SYS_WINNT"\
 /FR"$(INTDIR)/" /Fp"$(INTDIR)/ntptrace.pch" /YX /Fo"$(INTDIR)/" /c 
CPP_OBJS=.\WinRel/
CPP_SBRS=.\WinRel/
# ADD BASE RSC /l 0x409 /d "NDEBUG"
# ADD RSC /l 0x409 /d "NDEBUG"
BSC32=bscmake.exe
# ADD BASE BSC32 /nologo
# ADD BSC32 /nologo
BSC32_FLAGS=/nologo /o"$(OUTDIR)/ntptrace.bsc" 
BSC32_SBRS= \
	".\WinRel\ntptrace.sbr" \
	".\WinRel\version.sbr"

"$(OUTDIR)\ntptrace.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
    $(BSC32) @<<
  $(BSC32_FLAGS) $(BSC32_SBRS)
<<

LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
# ADD LINK32 wsock32.lib winmm.lib ..\libntp\WinRel\libntp.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:console /incremental:yes /machine:I386
LINK32_FLAGS=wsock32.lib winmm.lib ..\libntp\WinRel\libntp.lib kernel32.lib\
 user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib\
 ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:console /incremental:yes\
 /pdb:"$(OUTDIR)/ntptrace.pdb" /machine:I386 /out:"$(OUTDIR)/ntptrace.exe" 
LINK32_OBJS= \
	".\WinRel\ntptrace.obj" \
	".\WinRel\version.obj"

"$(OUTDIR)\ntptrace.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
    $(LINK32) @<<
  $(LINK32_FLAGS) $(LINK32_OBJS)
<<

!ELSEIF  "$(CFG)" == "ntptrace - Win32 Debug"

# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 1
# PROP BASE Output_Dir "WinDebug"
# PROP BASE Intermediate_Dir "WinDebug"
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 1
# PROP Output_Dir "WinDebug"
# PROP Intermediate_Dir "WinDebug"
OUTDIR=.\WinDebug
INTDIR=.\WinDebug

ALL : "$(OUTDIR)\ntptrace.exe" "$(OUTDIR)\ntptrace.bsc"

CLEAN : 
	-@erase ".\WinDebug\vc40.pdb"
	-@erase ".\WinDebug\vc40.idb"
	-@erase ".\WinDebug\ntptrace.bsc"
	-@erase ".\WinDebug\version.sbr"
	-@erase ".\WinDebug\ntptrace.sbr"
	-@erase ".\WinDebug\ntptrace.exe"
	-@erase ".\WinDebug\ntptrace.obj"
	-@erase ".\WinDebug\version.obj"
	-@erase ".\WinDebug\ntptrace.ilk"
	-@erase ".\WinDebug\ntptrace.pdb"

"$(OUTDIR)" :
    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"

# ADD BASE CPP /nologo /ML /W3 /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_CONSOLE" /FR /YX /c
# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /I "..\include" /D "_DEBUG" /D "DEBUG" /D "SYS_WINNT" /FR /YX /c
CPP_PROJ=/nologo /MTd /W3 /Gm /GX /Zi /Od /I "..\include" /D "_DEBUG" /D\
 "DEBUG" /D "SYS_WINNT" /FR"$(INTDIR)/" /Fp"$(INTDIR)/ntptrace.pch" /YX\
 /Fo"$(INTDIR)/" /Fd"$(INTDIR)/" /c 
CPP_OBJS=.\WinDebug/
CPP_SBRS=.\WinDebug/
# ADD BASE RSC /l 0x409 /d "_DEBUG"
# ADD RSC /l 0x409 /d "_DEBUG"
BSC32=bscmake.exe
# ADD BASE BSC32 /nologo
# ADD BSC32 /nologo
BSC32_FLAGS=/nologo /o"$(OUTDIR)/ntptrace.bsc" 
BSC32_SBRS= \
	".\WinDebug\version.sbr" \
	".\WinDebug\ntptrace.sbr"

"$(OUTDIR)\ntptrace.bsc" : "$(OUTDIR)" $(BSC32_SBRS)
    $(BSC32) @<<
  $(BSC32_FLAGS) $(BSC32_SBRS)
<<

LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386
# ADD LINK32 wsock32.lib winmm.lib ..\libntp\WinDebug\libntp.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:console /debug /machine:I386
LINK32_FLAGS=wsock32.lib winmm.lib ..\libntp\WinDebug\libntp.lib kernel32.lib\
 user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib\
 ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:console /incremental:yes\
 /pdb:"$(OUTDIR)/ntptrace.pdb" /debug /machine:I386\
 /out:"$(OUTDIR)/ntptrace.exe" 
LINK32_OBJS= \
	".\WinDebug\ntptrace.obj" \
	".\WinDebug\version.obj"

"$(OUTDIR)\ntptrace.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
    $(LINK32) @<<
  $(LINK32_FLAGS) $(LINK32_OBJS)
<<

!ENDIF 

.c{$(CPP_OBJS)}.obj:
   $(CPP) $(CPP_PROJ) $<  

.cpp{$(CPP_OBJS)}.obj:
   $(CPP) $(CPP_PROJ) $<  

.cxx{$(CPP_OBJS)}.obj:
   $(CPP) $(CPP_PROJ) $<  

.c{$(CPP_SBRS)}.sbr:
   $(CPP) $(CPP_PROJ) $<  

.cpp{$(CPP_SBRS)}.sbr:
   $(CPP) $(CPP_PROJ) $<  

.cxx{$(CPP_SBRS)}.sbr:
   $(CPP) $(CPP_PROJ) $<  

################################################################################
# Begin Target

# Name "ntptrace - Win32 Release"
# Name "ntptrace - Win32 Debug"

!IF  "$(CFG)" == "ntptrace - Win32 Release"

!ELSEIF  "$(CFG)" == "ntptrace - Win32 Debug"

!ENDIF 

################################################################################
# Begin Source File

SOURCE=.\ntptrace.c

"$(INTDIR)\ntptrace.obj" : $(SOURCE) "$(INTDIR)"

"$(INTDIR)\ntptrace.sbr" : $(SOURCE) "$(INTDIR)"


# End Source File
################################################################################
# Begin Source File

SOURCE=.\version.c

"$(INTDIR)\version.obj" : $(SOURCE) "$(INTDIR)"

"$(INTDIR)\version.sbr" : $(SOURCE) "$(INTDIR)"


# End Source File
# End Target
# End Project
################################################################################

--------------238829B63AB9
Content-Type: text/plain; charset=us-ascii; name="Xntpd.mak"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename="Xntpd.mak"

# Microsoft Developer Studio Generated NMAKE File, Format Version 4.20
# ** DO NOT EDIT **

# TARGTYPE "Win32 (x86) Console Application" 0x0103

!IF "$(CFG)" == ""
CFG=xntpd - Win32 Debug
!MESSAGE No configuration specified.  Defaulting to xntpd - Win32 Debug.
!ENDIF 

!IF "$(CFG)" != "xntpd - Win32 Release" && "$(CFG)" != "xntpd - Win32 Debug"
!MESSAGE Invalid configuration "$(CFG)" specified.
!MESSAGE You can specify a configuration when running NMAKE on this makefile
!MESSAGE by defining the macro CFG on the command line.  For example:
!MESSAGE 
!MESSAGE NMAKE /f "xntpd.mak" CFG="xntpd - Win32 Debug"
!MESSAGE 
!MESSAGE Possible choices for configuration are:
!MESSAGE 
!MESSAGE "xntpd - Win32 Release" (based on "Win32 (x86) Console Application")
!MESSAGE "xntpd - Win32 Debug" (based on "Win32 (x86) Console Application")
!MESSAGE 
!ERROR An invalid configuration is specified.
!ENDIF 

!IF "$(OS)" == "Windows_NT"
NULL=
!ELSE 
NULL=nul
!ENDIF 
################################################################################
# Begin Project
# PROP Target_Last_Scanned "xntpd - Win32 Debug"
CPP=cl.exe
RSC=rc.exe

!IF  "$(CFG)" == "xntpd - Win32 Release"

# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 0
# PROP BASE Output_Dir "WinRel"
# PROP BASE Intermediate_Dir "WinRel"
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 0
# PROP Output_Dir "WinRel"
# PROP Intermediate_Dir "WinRel"
OUTDIR=.\WinRel
INTDIR=.\WinRel

ALL : "$(OUTDIR)\xntpd.exe" "$(OUTDIR)\xntpd.bsc"

CLEAN : 
	-@erase "$(INTDIR)\messages.res"
	-@erase "$(INTDIR)\ntp_config.obj"
	-@erase "$(INTDIR)\ntp_config.sbr"
	-@erase "$(INTDIR)\ntp_control.obj"
	-@erase "$(INTDIR)\ntp_control.sbr"
	-@erase "$(INTDIR)\ntp_filegen.obj"
	-@erase "$(INTDIR)\ntp_filegen.sbr"
	-@erase "$(INTDIR)\ntp_intres.obj"
	-@erase "$(INTDIR)\ntp_intres.sbr"
	-@erase "$(INTDIR)\ntp_io.obj"
	-@erase "$(INTDIR)\ntp_io.sbr"
	-@erase "$(INTDIR)\ntp_leap.obj"
	-@erase "$(INTDIR)\ntp_leap.sbr"
	-@erase "$(INTDIR)\ntp_loopfilter.obj"
	-@erase "$(INTDIR)\ntp_loopfilter.sbr"
	-@erase "$(INTDIR)\ntp_monitor.obj"
	-@erase "$(INTDIR)\ntp_monitor.sbr"
	-@erase "$(INTDIR)\ntp_peer.obj"
	-@erase "$(INTDIR)\ntp_peer.sbr"
	-@erase "$(INTDIR)\ntp_proto.obj"
	-@erase "$(INTDIR)\ntp_proto.sbr"
	-@erase "$(INTDIR)\ntp_refclock.obj"
	-@erase "$(INTDIR)\ntp_refclock.sbr"
	-@erase "$(INTDIR)\ntp_request.obj"
	-@erase "$(INTDIR)\ntp_request.sbr"
	-@erase "$(INTDIR)\ntp_restrict.obj"
	-@erase "$(INTDIR)\ntp_restrict.sbr"
	-@erase "$(INTDIR)\ntp_timer.obj"
	-@erase "$(INTDIR)\ntp_timer.sbr"
	-@erase "$(INTDIR)\ntp_unixclock.obj"
	-@erase "$(INTDIR)\ntp_unixclock.sbr"
	-@erase "$(INTDIR)\ntp_util.obj"
	-@erase "$(INTDIR)\ntp_util.sbr"
	-@erase "$(INTDIR)\ntpd.obj"
	-@erase "$(INTDIR)\ntpd.sbr"
	-@erase "$(INTDIR)\refclock_acts.obj"
	-@erase "$(INTDIR)\refclock_acts.sbr"
	-@erase "$(INTDIR)\refclock_as2201.obj"
	-@erase "$(INTDIR)\refclock_as2201.sbr"
	-@erase "$(INTDIR)\refclock_atom.obj"
	-@erase "$(INTDIR)\refclock_atom.sbr"
	-@erase "$(INTDIR)\refclock_chu.obj"
	-@erase "$(INTDIR)\refclock_chu.sbr"
	-@erase "$(INTDIR)\refclock_conf.obj"
	-@erase "$(INTDIR)\refclock_conf.sbr"
	-@erase "$(INTDIR)\refclock_datum.obj"
	-@erase "$(INTDIR)\refclock_datum.sbr"
	-@erase "$(INTDIR)\refclock_heath.obj"
	-@erase "$(INTDIR)\refclock_heath.sbr"
	-@erase "$(INTDIR)\refclock_irig.obj"
	-@erase "$(INTDIR)\refclock_irig.sbr"
	-@erase "$(INTDIR)\refclock_leitch.obj"
	-@erase "$(INTDIR)\refclock_leitch.sbr"
	-@erase "$(INTDIR)\refclock_local.obj"
	-@erase "$(INTDIR)\refclock_local.sbr"
	-@erase