readme.txt

Stellaris Luminary Micro 系列之 DK-LM3S801 多个学习范例全都是基于 Keil 工程版的范例, 而范例内容列举如下: 1.BitBand 2.Comparator

Comparator

This example application demonstrates the operation of the analog
comparator(s).  Comparator zero (which is present on all devices that have
analog comparators) is configured to compare its negative input to an
internally generated 1.65V reference and toggle the state of the LED on port B0
based on comparator change interrupts.  The LED will be turned on by the
interrupt handler when a rising edge on the comparator output is detected, and
will be turned off when a falling edge is detected.

In order for this example to work properly, the ULED0 (JP22) jumper must be
installed on the board.

-------------------------------------------------------------------------------

Copyright (c) 2005,2006 Luminary Micro, Inc.  All rights reserved.

Software License Agreement

Luminary Micro, Inc. (LMI) is supplying this software for use solely and
exclusively on LMI's Stellaris Family of microcontroller products.

The software is owned by LMI and/or its suppliers, and is protected under
applicable copyright laws.  All rights are reserved.  Any use in violation of
the foregoing restrictions may subject the user to criminal sanctions under
applicable laws, as well as to civil liability for the breach of the terms and
conditions of this license.

THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.  LMI SHALL NOT, IN
ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
FOR ANY REASON WHATSOEVER.

This is part of revision 852 of the Stellaris Driver Library.