📄 readme.txt
字号:
Interrupts
This example application demonstrates the interrupt preemption and
tail-chaining capabilities of Cortex-M3 microprocessor and NVIC. Nested
interrupts are synthesized when the interrupts have the same priority,
increasing priorities, and decreasing priorities. With increasing priorities,
preemption will occur; in the other two cases tail-chaining will occur. The
currently pending interrupts and the currently executing interrupt will be
displayed on the LCD; individual LEDs connected to port B0-B2 will be turned on
upon interrupt handler entry and off before interrupt handler exit so that the
off-to-on time can be observed with a scope or logic analyzer to see the speed
of tail-chaining (for the two cases where tail-chaining is occurring).
In order for this example to work properly, the ULED0 (JP22), ULED1 (JP23), and
ULED2 (JP24) jumpers must be installed on the board, and the PB1 (JP1) jumper
on the daughtercard must be set to pins 2 & 3.
-------------------------------------------------------------------------------
Copyright (c) 2005,2006 Luminary Micro, Inc. All rights reserved.
Software License Agreement
Luminary Micro, Inc. (LMI) is supplying this software for use solely and
exclusively on LMI's Stellaris Family of microcontroller products.
The software is owned by LMI and/or its suppliers, and is protected under
applicable copyright laws. All rights are reserved. Any use in violation of
the foregoing restrictions may subject the user to criminal sanctions under
applicable laws, as well as to civil liability for the breach of the terms and
conditions of this license.
THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. LMI SHALL NOT, IN
ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
FOR ANY REASON WHATSOEVER.
This is part of revision 618 of the Stellaris Driver Library.
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -