wb_master.pt

自动生成VERILOG 工具

port wbport wbm clk_i:clk, rst_i:rst, cyc_o:cyc, stb_o:stb,
                we_o:we, ack_i:ack, adr_o:adr, dat_i:din, dat_o:dout;

module wb_master(clk, rst, adr, din, dout, 
		 we, stb, cyc, ack);
   input [7:0]  din;   
   input 	ack, clk, rst;
   output 	cyc, stb, we;
   output [7:0] adr, dout;
      
   reg [7:0] 	adr, dout;
   reg 		cyc, stb;
   reg 		we;
   
   reg [7:0] 	q;
   
   integer 	i;
       
   initial
      begin
	 // initial values	 
	 adr  = 8'hxx;
	 dout = 8'hxx;
	 cyc  = 1'b0;
	 stb  = 1'bx;
	 we   = 1'hx;

	 @(posedge rst); // Wait for reset to go up	 
	 @(negedge rst); // Wait for reset to go down
	 
	 for (i=0; i<8; i=i+1)
	    wb_read(1, i, q);
	 
	 $stop;
      end
   
   ////////////////////////////////////////////////////////////////////
   //
   // Wishbone read cycle
   //
   
   task wb_read;
      input        delay;
      integer 	   delay;
      
      input [7:0] a;
      output [ 7:0] d;
      
      begin
	 repeat(delay) @(posedge clk);
	 #1;
	 adr  = a;
	 dout = 8'hxx;
	 cyc  = 1'b1;
	 stb  = 1'b1;
	 we   = 1'b0;
	 
	 @(posedge clk);
	 while(~ack)	@(posedge clk);
	 #1;
	 cyc  = 1'b0;
	 stb  = 1'bx;
	 adr  = 8'hxx;
	 dout = 8'hxx;
	 we   = 1'hx;
	 d    = din;

	 $display ("Read %d at address %d", d, a);
      end
   endtask
   
endmodule