fiq.lst
来自「悬挂绘图系统（2005年全国电子设计大赛题目）基于凌阳单片机」· LST 代码 · 共 360 行 · 第 1/2 页
LST
360 行
Sunplus u'nSP Assembler - Ver. 1.14.3.1
Listing File Has Been Relocated
.PUBLIC _FIQ
//...............................................
.EXTERNAL _BSR_FIQ_Routine
.EXTERNAL __gIsStopRecog //变量值 = 0 辨识器忙
// = 1 辨识器停止
//.EXTERNAL F_Key_Scan;
.PUBLIC _BREAK
.EXTERNAL _PlayFlag
//..................................................
.INCLUDE A2000.inc;
< //////////////////////////////////////////////////////////////////////////////////////////
< // Progarm: SACM-A2000 API external definition for sacmVxx.lib
< // Writen by: Andy
< // Date: 2000/06/20
< // Date: 2001/10/11 Add Manual mode definition
< //////////////////////////////////////////////////////////////////////////////////////////
<
< .EXTERNAL F_SACM_A2000_Initial //
< .EXTERNAL F_SACM_A2000_ServiceLoop // For Auto Mode only
< .EXTERNAL F_SACM_A2000_Play // For Auto Mode only
< .EXTERNAL F_SACM_A2000_Play_Ex // For Auto Mode only/few delay for sentence
< .EXTERNAL F_SACM_A2000_Stop //
< .EXTERNAL F_SACM_A2000_Pause //
< .EXTERNAL F_SACM_A2000_Resume //
< .EXTERNAL F_SACM_A2000_Volume //
< .EXTERNAL F_SACM_A2000_Status //
<
< .EXTERNAL F_SACM_A2000_InitDecoder // For Manual Mode only
< .EXTERNAL F_SACM_A2000_Decoder // For Manual Mode only
< .EXTERNAL F_SACM_A2000_InitQueue // For Manual Mode only
< .EXTERNAL F_SACM_A2000_FillQueue // For Manual Mode only
< .EXTERNAL F_SACM_A2000_TestQueue // For Manual Mode only
<
< .EXTERNAL F_FIQ_Service_SACM_A2000 // ISR
<
<
< //========================================================================================
< // End of a2000.inc
< //========================================================================================
<
.INCLUDE resource.inc
<
< // Resource Table
< // Created by IDE, Do not modify this table
<
00008390 < .TEXT
< .external _RES_Table;
< .external _RES_BAI_16K_SA;
< .external _RES_BAI_16K_EA;
< .external _RES_DI_16K_SA;
< .external _RES_DI_16K_EA;
< .external _RES_EIGHT_16K_SA;
< .external _RES_EIGHT_16K_EA;
< .external _RES_FIVE_16K_SA;
< .external _RES_FIVE_16K_EA;
< .external _RES_FOUR_16K_SA;
< .external _RES_FOUR_16K_EA;
< .external _RES_NIGHT_16K_SA;
< .external _RES_NIGHT_16K_EA;
< .external _RES_ONE_16K_SA;
< .external _RES_ONE_16K_EA;
< .external _RES_SEVEN_16K_SA;
< .external _RES_SEVEN_16K_EA;
< .external _RES_SEX_16K_SA;
< .external _RES_SEX_16K_EA;
< .external _RES_TEN_16K_SA;
< .external _RES_TEN_16K_EA;
< .external _RES_THREE_16K_SA;
< .external _RES_THREE_16K_EA;
< .external _RES_TWO_16K_SA;
< .external _RES_TWO_16K_EA;
< .external _RES_ZERO_16K_SA;
< .external _RES_ZERO_16K_EA;
< .external _RES_M_16K_SA;
< .external _RES_M_16K_EA;
< .external _RES_TIME_16K_SA;
< .external _RES_TIME_16K_EA;
<
< // End Table
.INCLUDE hardware.inc
< //========================================================================================
< // Progarm: The file be included by modules
< // Arranged by: Andy Hsu
< // Date: 2000/06/23: first version
< // 2000/07/24: modified
< // 2000/10/20: modified for version 52A
< //========================================================================================
< //////////////////////////////////////////////////////////////////
< // Definitions for I/O Port
< //////////////////////////////////////////////////////////////////
< .DEFINE P_IOA_Data 0x7000; // Write Data into data register and read from IOA pad
< .DEFINE P_IOA_Buffer 0x7001; // Write Data into buffer register and read from buffer register
< .DEFINE P_IOA_Dir 0x7002; // Direction vector for IOA
< .DEFINE P_IOA_Attrib 0x7003; // Attribute vector for IOA
< .DEFINE P_IOA_Latch 0x7004; // Latch PortA data for key change wake-up
<
< .DEFINE P_IOB_Data 0x7005; // Write Data into the data register and read from IOB pad
< .DEFINE P_IOB_Buffer 0x7006; // Write Data into buffer register and read from buffer register
< .DEFINE P_IOB_Dir 0x7007; // Direction vector for IOB
< .DEFINE P_IOB_Attrib 0x7008; // Attribute vector for IOB
<
< .DEFINE P_FeedBack 0x7009; // Clock form external R,C
< .DEFINE P_TimerA_Data 0x700A; // Data port for TimerA
< .DEFINE P_TimerA_Ctrl 0x700B; // Control Port for TimerA
< .DEFINE P_TimerB_Data 0x700C; // Data port for TimerB
< .DEFINE P_TimerB_Ctrl 0x700D; // Control Port for TimerB
< .DEFINE P_TimeBase_Setup 0x700E; // TimerBase Freq. Set
< .DEFINE P_TimeBase_Clear 0x700F; // Reset Timerbase counter
< .DEFINE P_INT_Ctrl 0x7010; // Control port for interrupt source
< .DEFINE P_INT_Clear 0x7011; // Clear interrupt source
< .DEFINE P_Watchdog_Clear 0x7012; // Watchdog Reset
< .DEFINE P_SystemClock 0x7013; // Change system clock frequency(include go to standby mode)
<
< //... PA6442 Old version (for EC-02) ...........
< //.DEFINE P_ADDA 0x7014; //10-bit DA(W) AD(R)
< //.DEFINE P_DAC1 0x7014; //
< //.DEFINE P_AD_Ctrl 0x7015; //AD/DA control
< //.DEFINE P_AD_Status 0x7015; //AD status
< //.DEFINE P_DAC2 0x7016; //DAC channel 2
< //.DEFINE P_PWM 0x7016; //PWM output
< //.DEFINE P_DA_Ctrl 0x7017; //DAC latch control
<
< //... PA6442 New version MC52A (For EC-03)....
< .DEFINE P_ADC 0x7014; // Data Port for AD
< .DEFINE P_ADC_Ctrl 0x7015; // Control Port for AD control
< //.DEFINE P_ADC_Status 0x7015; // AD Port Status
< .DEFINE P_DAC2 0x7016; // Data Port for DAC2
< //.DEFINE P_PWM 0x7016; // Data Port for PWM
< .DEFINE P_DAC1 0x7017; // Data Port for DAC1
< .DEFINE P_DAC_Ctrl 0x702A; // Control Port for two DAC and audio output mode
< //............................................
<
< //.DEFINE P_IR_Ctrl 0x7018; // Control Port for IR
< .DEFINE P_LVD_Ctrl 0x7019; // Control Port for LVD
<
< .DEFINE P_SIO_Addr_Low 0x701B; // Address Port low
< .DEFINE P_SIO_Addr_Mid 0x701C; // Address Port middle
< .DEFINE P_SIO_Addr_High 0x701D; // Address Port high
< .DEFINE P_SIO_Ctrl 0x701E; // Control Port
< .DEFINE P_SIO_Start 0x701F; // Start port for serial interface
< .DEFINE P_SIO_Stop 0x7020; // Stop port for serial interface
<
< .DEFINE P_UART_Command1 0x7021; // Command1 Port for UART
< .DEFINE P_UART_Command2 0x7022; // Command2 Port for UART
< .DEFINE P_UART_Data 0x7023; // Data Port for UART
< .DEFINE P_UART_BaudScalarLow 0x7024; // Set Baud Rate scalar low
< .DEFINE P_UART_BaudScalarHigh 0x7025; // Set Baud Rate scalar high
<
<
< //... Definitions for P_INT_Ctrl ..............
< .DEFINE C_IRQ6_TMB2 0x0001; // Timer B IRQ6
< .DEFINE C_IRQ6_TMB1 0x0002; // Timer A IRQ6
< .DEFINE C_IRQ5_2Hz 0x0004; // 2Hz IRQ5
< .DEFINE C_IRQ5_4Hz 0x0008; // 4Hz IRQ5
< .DEFINE C_IRQ4_1KHz 0x0010; // 1024Hz IRQ4
< .DEFINE C_IRQ4_2KHz 0x0020; // 2048Hz IRQ4
< .DEFINE C_IRQ4_4KHz 0x0040; // 4096Hz IRQ4
< .DEFINE C_IRQ3_KEY 0x0080; // Key Change IRQ3
< .DEFINE C_IRQ3_EXT1 0x0100; // Ext1 IRQ3
< .DEFINE C_IRQ3_EXT2 0x0200; // Ext2 IRQ3
< .DEFINE C_IRQ2_TMB 0x0400; // Timer B IRQ2
< .DEFINE C_FIQ_TMB 0x0800; // Timer B FIQ
< .DEFINE C_IRQ1_TMA 0x1000; // Timer A IRQ1
< .DEFINE C_FIQ_TMA 0x2000; // Timer A FIQ
< .DEFINE C_IRQ0_PWM 0x4000; // PWM IRQ0
< .DEFINE C_FIQ_PWM 0x8000; // PWM FIQ
<
< // Definitions for P_TimerA/B_Ctrl ............
< .DEFINE C_Fosc_2 0x0000; //
< .DEFINE C_Fosc_256 0x0001; //
< .DEFINE C_32768Hz 0x0002; //
< .DEFINE C_8192Hz 0x0003; //
< .DEFINE C_4096Hz 0x0004; //
< .DEFINE C_A1 0x0005; //
< .DEFINE C_A0 0x0006; //
< .DEFINE C_Ext1 0x0007; //
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?