dianzhen.c

16乘16点阵设计点阵源程序及编译, 采用电路最简洁,需要,可以邮件联系

#include <at89x51.h>
#include <intrins.h>

sbit  SDATA_595 = P2^0 ;       /*串行数据输入*/  
sbit  SCLK_595  = P2^1;       /*移位时钟脉冲*/
sbit  RCK_595   = P2^2;      /*输出锁存器控制脉冲*/

//共阳段码表
//字节的高位对应数码管的H段，依次类推 
static unsigned char code number_Tab[]={/*--   文字:  无  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x02,0x02,0x02,0x42,0x04,0x42,0x08,0x42,0x10,0x42,0x20,0x42,0xC0,0x7F,0x00,
0x43,0xFC,0x42,0x02,0x42,0x02,0x42,0x02,0x42,0x02,0x42,0x02,0x02,0x0E,0x00,0x00,
/*--  文字:  线  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x02,0x04,0x06,0x44,0x1A,0xC4,0xE3,0x48,0x46,0x48,0x00,0x48,0x09,0x04,0x09,0x04,
0x09,0x08,0xFF,0xC8,0x09,0x30,0x49,0x28,0x39,0x44,0x29,0x02,0x01,0x1F,0x00,0x00,
/*--  文字:  电  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x00,0x00,0x00,0x1F,0xF0,0x12,0x20,0x12,0x20,0x12,0x20,0x12,0x20,0xFF,0xFC,
0x12,0x22,0x12,0x22,0x12,0x22,0x12,0x22,0x1F,0xF2,0x00,0x02,0x00,0x0E,0x00,0x00,
/*--  文字:  我  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x04,0x20,0x04,0x20,0x44,0x42,0x44,0x41,0x7F,0xFE,0x84,0x80,0x84,0x80,0x04,0x08,
0x04,0x08,0xFF,0x10,0x04,0xE0,0x44,0x58,0x35,0x84,0x04,0x02,0x04,0x0F,0x00,0x00,
/*--  文字:  只  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x00,0x00,0x02,0x00,0x04,0x7F,0x8C,0x41,0x18,0x41,0x70,0x41,0x20,0x41,0x00,
0x41,0x00,0x41,0x00,0x41,0x40,0x41,0x20,0x7F,0x98,0x00,0x0E,0x00,0x04,0x00,0x00,
/*--  文字:  想  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x10,0x80,0x13,0x02,0x1C,0x0E,0xFF,0x80,0x18,0x1C,0x16,0x02,0x10,0x02,0x00,0x22,
0x7F,0x9A,0x54,0x82,0x54,0x82,0x54,0x86,0x54,0x80,0x7F,0x90,0x00,0x0C,0x00,0x00,
/*--  文字:  告  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x01,0x00,0x05,0x00,0x09,0x00,0xF1,0x7E,0x51,0x44,0x11,0x44,0x11,0x44,0xFF,0x44,
0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x7E,0x11,0x00,0x11,0x00,0x01,0x00,0x00,0x00,
/*--  文字:  诉  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x02,0x00,0x82,0x00,0x73,0xFC,0x20,0x08,0x00,0x10,0x00,0x02,0x00,0x0C,0x3F,0xF0,
0x24,0x00,0x25,0x00,0x24,0x80,0x47,0xFE,0x44,0x40,0x44,0x30,0x04,0x20,0x00,0x00,
/*--  文字:  你  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x01,0x00,0x02,0x00,0x0F,0xFE,0x34,0x00,0xC2,0x08,0x04,0x30,0x19,0xC0,0xF0,0x84,
0x50,0x02,0x17,0xFC,0x10,0x00,0x11,0x00,0x14,0xC0,0x38,0x38,0x10,0x10,0x00,0x00,
/*--  文字:  爱  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x02,0x02,0x04,0x4D,0x05,0x69,0x09,0x59,0x32,0x49,0xE2,0x6F,0x54,0x59,0x54,
0xC9,0x48,0x89,0x58,0x99,0x64,0xE9,0x44,0x89,0x02,0x09,0x03,0x0C,0x02,0x00,0x00,
/*--  文字:  上  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x00,0x00,0x02,0x00,0x02,0x00,0x02,0x00,0x02,0x00,0x02,0x00,0x02,0x7F,0xFE,
0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x00,0x06,0x00,0x02,0x00,0x00,
/*--  文字:  你  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x01,0x00,0x02,0x00,0x0F,0xFE,0x34,0x00,0xC2,0x08,0x04,0x30,0x19,0xC0,0xF0,0x84,
0x50,0x02,0x17,0xFC,0x10,0x00,0x11,0x00,0x14,0xC0,0x38,0x38,0x10,0x10,0x00,0x00,
/*--  文字:  很  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x08,0x80,0x11,0x00,0x23,0xFF,0xC4,0x00,0x58,0x00,0x00,0x02,0x7F,0xFF,0x52,0x02,
0x52,0x04,0x53,0xC8,0x52,0x20,0x52,0x58,0x7E,0xCC,0x00,0x46,0x00,0x04,0x00,0x00,
/*--  文字:  快  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x0E,0x00,0x00,0x00,0xFF,0xFF,0x10,0x00,0x0D,0x01,0x11,0x02,0x11,0x0C,0x11,0x70,
0xFF,0x80,0x11,0x60,0x11,0x10,0x11,0x0C,0x1F,0x06,0x01,0x03,0x01,0x02,0x00,0x00,
/*--  文字:  乐  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x00,0x00,0x04,0x02,0x18,0x3F,0x30,0x22,0xE0,0x22,0x48,0x22,0x04,0x62,0x02,
0x5F,0xFC,0x42,0x00,0xC2,0x00,0xC2,0x40,0x42,0x30,0x02,0x1C,0x00,0x08,0x00,0x00,
/*--  调入了一幅图像：心形  --*/
/*--  宽度x高度=16x16  --*/
0x0F,0x00,0x10,0x80,0x20,0x40,0x20,0x20,0x10,0x10,0x08,0x08,0x04,0x04,0x02,0x02,
0x02,0x02,0x04,0x04,0x08,0x08,0x10,0x10,0x20,0x20,0x20,0x40,0x10,0x80,0x0F,0x00,


};             //H L = 共阳段码表
 
 unsigned int i,j,k=0,b,count=0;

/*-------------------------------------------------------------------------------
                           向74595输出一字节数据子程序
---------------------------------------------------------------------------------*/
static void  WR_595(unsigned char data num2 )
 {
   unsigned char data count1;
   
   for(count1=0;count1<=7;count1++)
   {
     if((num2&0x80)==0x80)  /*最高位为1，则向SDATA_595发送1*/
	    SDATA_595=1;        /*发出数据的最高位*/
	 else  
	    SDATA_595=0;
	 
	 num2<<=1;         /*右移位*/
	 SCLK_595=0;	   /*产生上生沿*/
	 SCLK_595=1;
	}  

 }
/*-------------------------------------------------------------------------------
                     打开锁存，更新74595输出子程序
---------------------------------------------------------------------------------*/
static void Out_595(void)
 {
   RCK_595=0;
   _nop_();
   _nop_();
   RCK_595=1;  /*上升沿锁存数据*/

 }


 /*-----------------------------------------------------------------------------
						   显示函数
 --------------------------------------------------------------------------*/
void disp(void)
{unsigned char move=0x80;
for(i=0;i<=30;i++)
 {if(k<32+count)
{for(j=0;j<8;j++)		 
{   
WR_595(number_Tab[k++]);
     WR_595(number_Tab[k++]);
     WR_595(~move);
     WR_595(0xFF);
Out_595();
move>>=1;
if(move==0x000)
move=0x80;
}
for(j=0;j<8;j++)
{
     WR_595(number_Tab[k++]);
     WR_595(number_Tab[k++]);
     WR_595(0xFF);
     WR_595(~move);
Out_595();
move>>=1;
 if(move==0x00)
move=0x80;
}
}  
k=count;
 
}
}
/*-------------------------------------------------------------------------------
                           主程序
--------------------------------------------------------------------------------*/
void main(void)
{
   while(1) 
   {	
   disp();
   count+=2; 
   if(count==1600000)
   count=0;
}
}