allversionprjdlg.cpp

能够把VC7.0-8.0的工程转换到VC6.0的工程

// AllVersionPrjDlg.cpp : 实现文件
//
/*
 COPYRIGHT CSK 2005
 ALL RIGHT RESERVED

 www.csksoft.net
*/
#include "stdafx.h"
#include "AllVersionPrj.h"
#include "AllVersionPrjDlg.h"
#include "slnprocess.h"

#ifdef _DEBUG
#define new DEBUG_NEW
#endif


// CAllVersionPrjDlg 对话框




CAllVersionPrjDlg::CAllVersionPrjDlg(CWnd* pParent /*=NULL*/)
	: CDialog(CAllVersionPrjDlg::IDD, pParent)
	, m_nDlgHeight(0)
	, m_nDlgWidth(0)
	, m_Conv_FileName(_T(""))
	, m_SRC_PRJ_VER(0)
	, m_Conv_Type(0)
	
{
	m_hIcon = AfxGetApp()->LoadIcon(IDR_MAINFRAME);
}

void CAllVersionPrjDlg::DoDataExchange(CDataExchange* pDX)
{
	CDialog::DoDataExchange(pDX);
	DDX_Control(pDX, IDC_SRC_HANDLE, m_SRC_Icon);
	DDX_Control(pDX, IDC_DEST_HANDLE, m_DEST_ICON);
	DDX_Control(pDX, IDC_CONV_TYPE, m_ConvType);
	DDX_Control(pDX, IDC_TXT_CONV_TYPE, m_Txt_Conv_Type);
	DDX_Control(pDX, IDC_START_CONV, m_Btn_Start_Conv);
	DDX_Control(pDX, IDC_BROW1, m_BtnBrow);

	DDX_Control(pDX, IDC_TXT_PRJ_NAME, m_ctrPrjName);
}

BEGIN_MESSAGE_MAP(CAllVersionPrjDlg, CDialog)
	ON_WM_PAINT()
	ON_WM_QUERYDRAGICON()
	//}}AFX_MSG_MAP
	ON_WM_ERASEBKGND()
	ON_WM_CTLCOLOR()
	ON_WM_DESTROY()
	ON_WM_DROPFILES()
	
	ON_WM_RBUTTONUP()
	ON_COMMAND(IDM_C2VS7, &CAllVersionPrjDlg::OnC2vs7)
	ON_COMMAND(IDM_C2VS6, &CAllVersionPrjDlg::OnC2vs6)
	ON_STN_CLICKED(IDC_CONV_TYPE, &CAllVersionPrjDlg::OnStnClickedConvType)
	ON_BN_CLICKED(IDC_START_CONV, &CAllVersionPrjDlg::OnBnClickedStartConv)
	ON_BN_CLICKED(IDC_BROW1, &CAllVersionPrjDlg::OnBnClickedBrow1)
	ON_WM_MOUSEMOVE()
END_MESSAGE_MAP()


// CAllVersionPrjDlg 消息处理程序

BOOL CAllVersionPrjDlg::OnInitDialog()
{

	CDialog::OnInitDialog();
	DragAcceptFiles();
	// 设置此对话框的图标。当应用程序主窗口不是对话框时，框架将自动
	//  执行此操作
	SetIcon(m_hIcon, TRUE);			// 设置大图标
	SetIcon(m_hIcon, FALSE);		// 设置小图标

	m_BkBru.CreateStockObject(NULL_BRUSH);
	m_ColoredBru.CreateSolidBrush(RGB(142,132,123));
	m_bkbitmap.LoadBitmapA((LPCTSTR)IDB_BKGND);
	m_ConvTypeCtr_Dis.LoadBitmapA((LPCTSTR)IDB_CONV_DIS);
	m_ConvTypeCtr_Ena.LoadBitmapA((LPCTSTR)IDB_CONV_ENV);
	m_ICO_VS.LoadBitmapA((LPCTSTR)IDB_VS_ICO);
	m_ICO_VS2005.LoadBitmapA((LPCTSTR)IDB_VS2005);
	m_ICO_VS2003.LoadBitmapA((LPCTSTR)IDB_VS2003);
	m_ICO_VS6.LoadBitmapA((LPCTSTR)IDB_VS6);
	BITMAP tmpMap;
	m_bkbitmap.GetBitmap(&tmpMap);
	m_nDlgHeight = tmpMap.bmHeight;
	m_nDlgWidth = tmpMap.bmWidth;
	RECT winRT,clientRT;
	GetWindowRect(&winRT);
	GetClientRect(&clientRT);
	MoveWindow(0,0,m_nDlgWidth+winRT.right-clientRT.right-winRT.left+clientRT.left,m_nDlgHeight+winRT.bottom-clientRT.bottom-winRT.top+clientRT.top);
	
	m_SRC_Icon.MoveWindow(77,137,100,100);
	m_BtnBrow.MoveWindow(61,114,50,20);
	m_BtnBrow.ShowWindow(SW_HIDE);
	m_DEST_ICON.MoveWindow(316,137,100,100);
	m_ConvType.MoveWindow(180,136,109,20);
	m_Txt_Conv_Type.MoveWindow(182,140,107,18);
	m_SRC_Icon.SetBitmap((HBITMAP)m_ICO_VS.GetSafeHandle());

	m_Btn_Start_Conv.MoveWindow(181,113,107,18);
	EnableConvTypeCtr(FALSE);
	SetConvType(0);
	return TRUE;  // 除非将焦点设置到控件，否则返回 TRUE
}

// 如果向对话框添加最小化按钮，则需要下面的代码
//  来绘制该图标。对于使用文档/视图模型的 MFC 应用程序，
//  这将由框架自动完成。

void CAllVersionPrjDlg::OnPaint()
{
	if (IsIconic())
	{
		CPaintDC dc(this); // 用于绘制的设备上下文

		SendMessage(WM_ICONERASEBKGND, reinterpret_cast<WPARAM>(dc.GetSafeHdc()), 0);

		// 使图标在工作矩形中居中
		int cxIcon = GetSystemMetrics(SM_CXICON);
		int cyIcon = GetSystemMetrics(SM_CYICON);
		CRect rect;
		GetClientRect(&rect);
		int x = (rect.Width() - cxIcon + 1) / 2;
		int y = (rect.Height() - cyIcon + 1) / 2;

		// 绘制图标
		dc.DrawIcon(x, y, m_hIcon);
	}
	else
	{
		CDialog::OnPaint();
	}
}

//当用户拖动最小化窗口时系统调用此函数取得光标显示。
//
HCURSOR CAllVersionPrjDlg::OnQueryDragIcon()
{
	return static_cast<HCURSOR>(m_hIcon);
}


void CAllVersionPrjDlg::OnOK()
{
	
	//CDialog::OnOK();
}

BOOL CAllVersionPrjDlg::OnEraseBkgnd(CDC* pDC)
{
	
	CDC memDC;
	memDC.CreateCompatibleDC(pDC);
	CBitmap *hOldBitmap=memDC.SelectObject(&m_bkbitmap);
	pDC->BitBlt(0,0,m_nDlgWidth,m_nDlgHeight,&memDC,0,0,SRCCOPY);
	memDC.SelectObject(hOldBitmap);
	memDC.DeleteDC();
	return NULL;
}

HBRUSH CAllVersionPrjDlg::OnCtlColor(CDC* pDC, CWnd* pWnd, UINT nCtlColor)
{
	HBRUSH hbr = CDialog::OnCtlColor(pDC, pWnd, nCtlColor);
	
	pDC->SetBkMode(0);
	switch(nCtlColor)
	{
		case CTLCOLOR_STATIC:
		case CTLCOLOR_BTN:
			hbr = (HBRUSH)m_BkBru.GetSafeHandle();
		
		break;

		
	}
	
	return hbr;
}

void CAllVersionPrjDlg::OnDestroy()
{
	CDialog::OnDestroy();
	m_BkBru.DeleteObject();
	m_bkbitmap.DeleteObject();
	m_ColoredBru.DeleteObject();
	m_ConvTypeCtr_Dis.DeleteObject();
	m_ConvTypeCtr_Ena.DeleteObject();
	m_ICO_VS.DeleteObject();
	m_ICO_VS2005.DeleteObject();
	m_ICO_VS2003.DeleteObject();
	m_ICO_VS6.DeleteObject();
	// TODO: Add your message handler code here
}

void CAllVersionPrjDlg::OnDropFiles(HDROP hDropInfo)
{
	
	int nFileNum;
	nFileNum = DragQueryFile(hDropInfo,0xFFFFFFFF,NULL,0);

	if (nFileNum<1 || nFileNum>=2)
	{
		
		MessageBox("一次只能接受一个文件\n请将VC工程文件拖至窗口(.SLN)","处理文件错误",MB_OK);
		DragFinish(hDropInfo);
	}
	else
	{
		TCHAR strFileName[MAX_PATH];
		DragQueryFile(hDropInfo,0,strFileName,MAX_PATH);
		CString strFilePath(strFileName);
		if (strFilePath.Right(4).CompareNoCase(".sln")==0){
			ProcessPrjFile(strFilePath);
		}
		else
		{
			MessageBox("请将VS.net(2003/2005)工程文件拖入\n扩展名是\".sln\"","处理文件错误",MB_OK);
		}
		DragFinish(hDropInfo);
	}
	
	//CDialog::OnDropFiles(hDropInfo);
}

void CAllVersionPrjDlg::OnCbnSelchangeCombo1()
{
	// TODO: Add your control notification handler code here
}

void CAllVersionPrjDlg::OnRButtonUp(UINT nFlags, CPoint point)
{
	CDialog::OnRButtonUp(nFlags, point);

	
}

void CAllVersionPrjDlg::OnC2vs7()
{
	SetConvType(2);
}

void CAllVersionPrjDlg::OnC2vs6()
{
	SetConvType(1);
}

void CAllVersionPrjDlg::SetConvType(UINT uType)
{
	m_Conv_Type = uType;
	switch(uType)
	{
		case 0://none
			m_Txt_Conv_Type.SetWindowTextA("<请选择工程>");
			m_DEST_ICON.SetBitmap((HBITMAP)m_ICO_VS.GetSafeHandle());
			
			break;
		case 1://To VS 6.0
			m_Txt_Conv_Type.SetWindowTextA("转换为VC 6.0");
			m_ConvType.RedrawWindow();
			m_Txt_Conv_Type.RedrawWindow();
			m_DEST_ICON.SetBitmap((HBITMAP)m_ICO_VS6.GetSafeHandle());
			
			break;
		case 2://To VS 7.0
			m_Txt_Conv_Type.SetWindowTextA("转换为VC 2003");
			m_ConvType.RedrawWindow();
			m_Txt_Conv_Type.RedrawWindow();
			m_DEST_ICON.SetBitmap((HBITMAP)m_ICO_VS2003.GetSafeHandle());
			
			break;
	}
}

void CAllVersionPrjDlg::EnableConvTypeCtr(bool bEnabled)
{
	m_ConvType.EnableWindow(bEnabled);
	m_Btn_Start_Conv.EnableWindow(bEnabled);
	if (bEnabled){
	
		m_ConvType.SetBitmap((HBITMAP)m_ConvTypeCtr_Ena.GetSafeHandle());
		
	}
	else
	{
		m_ConvType.SetBitmap((HBITMAP)m_ConvTypeCtr_Dis.GetSafeHandle());
	}
}

BOOL CAllVersionPrjDlg::ProcessPrjFile(CString & strFileName)
{
	EnableConvTypeCtr();
	slnprocess p;
	int nVersion;
	nVersion=p.GetPrjVersion(COString(strFileName.GetBuffer()));
	if (nVersion<0)
	{
		MessageBox("无法获得工程文件的版本信息\n请确保是由Visual Studio生成的\n该转换程序只能识别VS 2002,VS2003和VS2005的工程文件",
					"打开工程错误",MB_OK | MB_ICONINFORMATION);
		return -1;
	}
	else
	{
		if (nVersion>=700 && nVersion<900)
		{

			m_SRC_Icon.SetBitmap((HBITMAP)m_ICO_VS2003.GetSafeHandle());
			
		}
		else
		{

			if (nVersion>=900 && nVersion<1000)
			{


				m_SRC_Icon.SetBitmap((HBITMAP)m_ICO_VS2005.GetSafeHandle());
	
			}
			else
			{
				MessageBox("不支持该工程文件版本\n请确保是由Visual Studio生成的\n该转换程序只能识别VS 2002,VS2003和VS2005的工程文件",
					"打开工程错误",MB_OK | MB_ICONINFORMATION);
				return -1;
			}
		}

	}
	m_ctrPrjName.SetWindowTextA(strFileName.Right(strFileName.GetLength()-COString(strFileName.GetBuffer()).ReverseFind(0,'\\')-1));
	this->RedrawWindow();
	m_ctrPrjName.RedrawWindow();
	
	m_Conv_FileName = strFileName;
	m_SRC_PRJ_VER = nVersion;
	EnableConvTypeCtr();
	SetConvType(1);
}

void CAllVersionPrjDlg::OnStnClickedConvType()
{
	CMenu *Sub,cont;

	RECT rtConvLocation;
	cont.LoadMenuA((LPCTSTR)IDR_CONV_TYPE);
	Sub =  cont.GetSubMenu(0);
	m_ConvType.GetWindowRect(&rtConvLocation);

	if (m_SRC_PRJ_VER>=700 && m_SRC_PRJ_VER<1000){

		Sub->EnableMenuItem(IDM_C2VS6,MF_BYCOMMAND | MF_ENABLED);
	}
	if (m_SRC_PRJ_VER>=900 && m_SRC_PRJ_VER<1000){
		Sub->EnableMenuItem(IDM_C2VS7,MF_BYCOMMAND | MF_ENABLED);
	}
	Sub->TrackPopupMenu(TPM_LEFTALIGN |TPM_RIGHTBUTTON, rtConvLocation.right, rtConvLocation.bottom, this);
	cont.Detach();
}

void CAllVersionPrjDlg::OnBnClickedStartConv()
{
	m_Btn_Start_Conv.EnableWindow(FALSE);
	slnprocess p;
	int nResult;
	switch(m_Conv_Type)
	{
		case 1:	//2 vc6
			
			nResult = p.process(COString(m_Conv_FileName.GetBuffer()));
			switch(nResult)
			{
			case 0:
				MessageBox("转换完成，VC6的工程文件已经存在于工程目录下了:-)","转化成功",MB_OK | MB_ICONINFORMATION);
				break;
			case -1:
				MessageBox("无法打开源工程文件，它是否被其他程序占用了？","发生错误",MB_OK | MB_ICONINFORMATION);
				break;
			case -2:
				MessageBox("无法创建目标工程文件，请重试","发生错误",MB_OK | MB_ICONINFORMATION);
				break;


			}
			break;
		case 2: //2 vc7
			nResult =p.ConvToVS7(COString(m_Conv_FileName.GetBuffer()));
			switch(nResult)
			{
			case 0:
				MessageBox("转换完成，该工程文件已经替换为VS2003版本\n如果需要恢复原先版本可以将*.old文件改名后替换*.sln和*.vcproj文件即可","转化成功",MB_OK | MB_ICONINFORMATION);
				ProcessPrjFile(m_Conv_FileName);
				break;
			case -6:
				MessageBox("无法备份原工程文件,请确保它没有被其他程序所占用\n必须备份原文件才能开始转换","发生错误",MB_OK | MB_ICONINFORMATION);
				break;
			case -2:
				MessageBox("无法创建目标工程文件，请重试","发生错误",MB_OK | MB_ICONINFORMATION);
				break;
			case -1:
				MessageBox("创建要转化的工程文件\n你可以用已经备份的*.old文件改为原文件重试","发生错误",MB_OK | MB_ICONINFORMATION);
				break;		
			case -7:
				MessageBox("没有找到对应的*.vcproj文件。可能你要转化的不是VC++工程\n请使用备份的*.old文件恢复原工程","发生错误",MB_OK | MB_ICONINFORMATION);
				break;				
			}
			break;
	}
	m_Btn_Start_Conv.EnableWindow();
}

void CAllVersionPrjDlg::OnBnClickedBrow1()
{
	CFileDialog dlgFileBrow(TRUE,NULL,NULL,4|2,"VS.net 2003/2005项目文件(*.sln)|*.sln||");
	if (dlgFileBrow.DoModal()!=IDCANCEL)
	{
		ProcessPrjFile(dlgFileBrow.GetPathName());
	}
}

void CAllVersionPrjDlg::OnMouseMove(UINT nFlags, CPoint point)
{
	static int nLastFlag=0;
	POINT pt;
	pt.x=point.x;
	pt.y=point.y;

	RECT rt_src;

	rt_src.left = 61;
	rt_src.top =114;
	rt_src.right=160;
	rt_src.bottom=213;


	if (PtInRect(&rt_src,pt))
	{
		if (nLastFlag != 1)
		{
			m_BtnBrow.ShowWindow(SW_SHOW);
			nLastFlag = 1;
		}
	}
	else
	{
		if (nLastFlag == 1)
		{
			m_BtnBrow.ShowWindow(SW_HIDE);
			nLastFlag = 0;
		}
	}
	CDialog::OnMouseMove(nFlags, point);
}