msp430x11x1_wdt_02.asm

MSP430X11x1 Assembler Examples Code,Composer Essentials Code Examples

;*******************************************************************************
;   MSP430x11x1 Demo - WDT, Toggle P1.0, Interval Overflow ISR, 32kHz ACLK
;
;   Description: Toggle P1.0 using software timed by WDT ISR. Toggle rate is
;   exactly 250ms based on 32kHz ACLK WDT clock source.  In this example the
;   WDT is configured to divide 32768 watch-crystal(2^15) by 2^13 with an ISR
;   triggered @ 4Hz.
;   ACLK = LFXT1 = 32768Hz, MCLK = SMCLK = DCO ~800kHz
;   ;* External watch crystal installed on XIN XOUT is required for ACLK *//	
;
;                MSP430F1121
;             -----------------
;         /|\|              XIN|-
;          | |                 | 32kHz
;          --|RST          XOUT|-
;            |                 |
;            |             P1.0|-->LED
;
;   M. Buccini / Z. Albus
;   Texas Instruments Inc.
;   May 2005
;   Built with Code Composer Essentials Version: 1.0
;*******************************************************************************
 .cdecls C,LIST,  "msp430x11x1.h"
;-------------------------------------------------------------------------------
            .text                           ; Program Start
;-------------------------------------------------------------------------------
RESET       mov.w   #300h,SP                ; Initialize stackpointer
Setup       mov.w   #WDT_ADLY_250,&WDTCTL   ; WDT 250ms, ACLK, interval timer
            bis.b   #WDTIE,&IE1             ; Enable WDT interrupt
SetupP1     bis.b   #001h,&P1DIR            ; P1.0 output
                                            ;					
Mainloop    bis.w   #LPM3+GIE,SR            ; Enter LPM3, interrupts enabled
            nop                             ; Required only for debugger
                                            ;
;-------------------------------------------------------------------------------
WDT_ISR;    Toggle P1.0
;-------------------------------------------------------------------------------
            xor.b   #001h,&P1OUT            ; Toggle P1.0
            reti                            ;		
                                            ;
;-------------------------------------------------------------------------------
;           Interrupt Vectors
;-------------------------------------------------------------------------------
            .sect   ".reset"                ; MSP430 RESET Vector
            .short  RESET                   ;
            .sect   ".int10"                ; WDT Vector
            .short  WDT_ISR                 ;
            .end