changelog

无线网卡驱动程序 802.11b无线网卡可直接移植到2.6内核中去

	  at76c503-rfmd-acc.c, at76c503-rfmd.c, at76c505-rfmd.c: version
	  0.11beta5, initialize module_usbdfu.reset_delay in mod_init,
	  because HZ became a variable

2003-10-24 23:54  jal2

	* at76c503a/at76c503-i3861.c: added device Siemens Santis WLL-013

2003-10-24 23:54  jal2

	* at76c503a/at76c503-rfmd.c: added comment

2003-10-01 02:52  jal2

	* at76c503a/at76c505-rfmd.c: added device Fiberline WL240U

2003-09-14 23:45  jal2

	* at76c503a/at76c503.c: - set usb_device->state to
	  USB_STATE_CONFIGURED immediately after   usb_reset_device
	  (otherwise it remains in USB_STATE_ADDRESS with 2.6.0-test5)
	  patch provided by Dmitri Katchalov

2003-09-13 01:03  jal2

	* at76c503a/at76c503-i3861.c: added device Intel AP310 AnyPoint II
	  usb

2003-09-04 22:45  jal2

	* at76c503a/Makefile: allow copying *.mod files to fail (patch
	  provided by Pavel Roskin)

2003-09-04 09:42  jal2

	* at76c503a/.cvsignore: added more generated files

2003-09-04 09:27  jal2

	* at76c503a/: at76c503-i3861.c, at76c503-i3863.c,
	  at76c503-rfmd-acc.c, at76c503-rfmd.c, at76c503.c,
	  at76c505-rfmd.c, fw-pkg-i3861.h, fw-pkg-i3863.h, fw-pkg-r505.h,
	  fw-pkg-rfmd-1.101.0-84.h, fw-pkg-rfmd-acc-1.101.0-84.h: - fixed
	  compiler errors/warnings for 2.6.0-test4   (patches by Deuce and
	  Pavel Roskin) - fixed missing symbols request/release_firmware
	  when	 CONFIG_FW_LOADER is not set in the kernel

2003-09-03 02:15  jal2

	* at76c503a/: Makefile, at76c503-i3861.c, at76c503-i3863.c,
	  at76c503-rfmd-acc.c, at76c503-rfmd.c, at76c503.c, at76c503.h,
	  at76c505-rfmd.c, fw-empty.h, fw-pkg-i3861.h, fw-pkg-i3863.h,
	  fw-pkg-r505.h, fw-pkg-rfmd-1.101.0-84.h,
	  fw-pkg-rfmd-acc-1.101.0-84.h, gen_fw.c, readme.filenames,
	  usbdfu.c, usbdfu.h: - version 0.11beta6-2.6 - added support for
	  firmware download class (not tested yet) - simplified (IMHO)
	  usbdfu. It only provides a function to download the	internal fw
	  part and does no longer claim the device's interface - moved
	  REMAP / reset into at76c503 - added work-around (aka very dirty
	  hack) in at76c503 to get the new two	 endpoints of the interface
	  after usb_reset_device() is called

2003-08-24 16:54  jal2

	* at76c503a/usbdfu.c: fixed interface address bug

2003-08-24 16:53  jal2

	* at76c503a/Makefile: new version 0.11beta5-2.6

2003-08-24 16:51  jal2

	* at76c503a/: at76c503-i3861.c, at76c503-i3863.c,
	  at76c503-rfmd-acc.c, at76c503-rfmd.c, at76c503.c, at76c503.h,
	  at76c505-rfmd.c: - applied Jason Andryk's patch (posted to
	  at76c503a-develop by Deuce on Thu, 14 Aug 2003)

2003-08-14 23:45  jal2

	* at76c503a/at76c503-rfmd.c: added WL-200U device (1371/2)

2003-07-30 10:31  jal2

	* at76c503a/: at76c503.c, usbdfu.c: added patch for 2.4.2
	  Montavista, embedded PPC (supplied by Jocelyn Mayer)

2003-07-30 01:13  jal2

	* at76c503a/at76c503a.spec: added spec file to build rpms

2003-07-26 23:14  jal2

	* at76c503a/: Makefile, at76c503-i3861.c, at76c503-i3863.c,
	  at76c503-rfmd-acc.c, at76c503-rfmd.c, at76c503.c, at76c503.h,
	  at76c505-rfmd.c, usbdfu.c, usbdfu.h: - Pavel Roskin's patch for
	  2.6.0 as mailed on 07-24-2003 under Subj   "Re:
	  [at76c503a-develop] Re: [Atmelwlandriver-devel] Re: Atmel USB" to
	  [e-mail]

2003-07-26 21:06  jal2

	* at76c503a/: Makefile, at76c503.c, usbdfu.c: - 0.11beta4 - added
	  init. of bss_list_timer (patch provided by Pavel Roskin) - added
	  id_table for usbdfu for DFU class (patch provided by Pavel
	  Roskin)

2003-07-20 13:48  jal2

	* at76c503a/: README, usbdfu.c: spelling corrected

2003-07-20 13:47  jal2

	* at76c503a/at76c503-rfmd.c: added device DWL-120e

2003-07-20 13:47  jal2

	* at76c503a/Makefile: no-unused-variable -> no-unused for gcc < 3.0

2003-07-15 23:57  jal2

	* at76c503a/: at76c503-i3861.c, at76c503-i3863.c,
	  at76c503-rfmd-acc.c, at76c503-rfmd.c, at76c503.c,
	  at76c505-rfmd.c, usbdfu.c: added #include <linux/init.h> to fix a
	  compile bug on ppc32 platform

2003-07-14 23:56  jal2

	* at76c503a/at76c503-i3861.c: added device Conceptronic C11U

2003-07-12 00:53  jal2

	* at76c503a/: CHANGELOG, Makefile, at76c503.c, at76c503.h: firmware
	  0.84 does not send trailing FCS in rx data

2003-07-08 02:02  jal2

	* at76c503a/: CHANGELOG, Makefile: 0.11beta2, new module for
	  RFMD-ACC firmware variant

2003-07-08 01:58  jal2

	* at76c503a/: at76c503-rfmd-acc.c, fw-rfmd-acc-1.101.0-84.h: -
	  0.11beta2 - added new driver variant (at76c503-rfmd-acc) for
	  Accton OEM design based devices   with RFMD radio, which need a
	  special firmware.

2003-06-27 00:28  jal2

	* at76c503a/at76c503.c: added dbg output on kevent's exit

2003-06-27 00:16  jal2

	* at76c503a/at76c503.c: added reg domains MKK1 and Israel

2003-06-21 02:01  jal2

	* at76c503a/at76c503-i3861.c: added Addtron AWU-120 device

2003-06-18 01:37  jal2

	* at76c503a/: at76c503.c, at76c503.h: - added rudimentary ethtool
	  support for SuSE's future hotplug - added nickname ioctl (to
	  suppress error at SuSE 8.2 hotplug config)

2003-06-17 00:20  jal2

	* at76c503a/: at76c503.c, at76c503.h: added test if channel is
	  valid for regulatory domain

2003-06-16 23:49  jal2

	* at76c503a/: README, at76c503.c, ieee802_11.h: - added values in
	  dbg param output at startup - added big-endian patch (by Kevin
	  Cernekee), removed #ifdef ... #else	for endianess in
	  ieee802_11.h. Translate all u16 values into cpu endianess
	  instead.

2003-06-16 23:46  jal2

	* at76c503a/Makefile: added CFLAGS to suppress gcc 3.3 warnings in
	  linux header files (no-common, no-sign-compare)

2003-06-05 02:07  jal2

	* at76c503a/usbdfu.c: fixed crash when device was disconnected
	  during fw download (patch by Pavel Roskin)

2003-06-04 02:44  jal2

	* at76c503a/at76c503.c: applied Pavel Roskin's patch to suppress
	  unsupported iwconfig modes (master,monitor)

2003-06-02 00:04  jal2

	* at76c503a/CHANGELOG: [no log message]

2003-06-01 23:42  jal2

	* at76c503a/: Makefile, README, at76c503.c, at76c503.h: - version
	  0.10 - added more DBG_* bits, cleaned dbg output - added iwpriv
	  commands for scan_{min,max}_time, scan_mode - added module
	  parameter for iwpriv commands

2003-05-29 14:35  jal2

	* at76c503a/: Makefile, README, at76c503.c: - 0.10beta3 - fine
	  tuned debug control:	 * added DBG_* macros to control debug
	  messages   * new macro dbg_uc for "unconditional" debug output -
	  fixed bug in changing the MAC address with firmware 1.101.x
	  (and probably 0.100.y as well): it must be done _after_
	  CMD_STARTUP was sent.  - set_mib: added wait_completion inside
	  this proc

2003-05-23 02:21  jal2

	* at76c503a/: at76c503.c, at76c503.h: added tx padding

2003-05-20 02:30  jal2

	* at76c503a/at76c503.c: fixed kernel crash when driver was rmmod'd
	  without opening the netdev before (bss_list_timer wasn't removed
	  in _delete_device())

2003-05-20 01:49  jal2

	* at76c503a/: Makefile, README, at76c503.c, at76c503.h,
	  ieee802_11.h: added support for 802.11 data fragmentation

2003-05-19 03:26  jal2

	* at76c503a/at76c503.c: fixed bug (possible system lockup) in
	  dump_bss_table: added spinlock release

2003-05-15 00:58  jal2

	* at76c503a/at76c503.c: suppress warning about uninit. ptr variable
	  with some gcc version =/= 2.95.2

2003-05-14 04:46  jal2

	* at76c503a/: README, at76c503.c, at76c503.h: added power save mode
	  (802.11 and Atmel's smart power save)

2003-05-08 23:57  jal2

	* at76c503a/at76c503-rfmd.c: added 3COM 3CRSHEW696 device

2003-05-02 02:16  jal2

	* at76c503a/at76c503.c: added rssi/noise/link in rx frame dbg
	  output, put it down to debug >= 2

2003-05-02 02:03  jal2

	* at76c503a/at76c503.c: - put unregister_netdev inside rntl_lock -
	  call flush_scheduled_tasks() before destroying the device

2003-05-01 23:48  jal2

	* at76c503a/: Makefile, README, at76c503.c, at76c503.h: - version
	  0.10beta1 (it's a major change) - Makefile: target install does
	  not compile anymore, use target all before - redesigned BSS list
	  handling: an entry now times out and is removed after
	  BSS_LIST_TIMEOUT (curr. 120 seconds) after the arrival of the
	  last beacon.	- new iwpriv command list_bss: dumps the bss list
	  to syslog (temporary command,   until we have iwlist).

2003-05-01 23:15  jal2

	* at76c503a/at76c503.c: This change fixes the problem with
	  re-loading the driver while the device stays powered (and keeps
	  its firmware). The problem was that downloading the external
	  firmware twice was fine with 0.90.x firmwares but fails with
	  0.100.x and 1.101.y. This change simply ignores the error
	  USB_ST_STALL during downloading the external firmware.

2003-04-26 00:21  jal2

	* at76c503a/at76c503-rfmd.c: added BenQ AWL-400 USB stick device

2003-04-25 03:13  jal2

	* at76c503a/at76c503-rfmd.c: switch to firmware 1.101.0-84 which
	  fixes the bug in joining 802.11g access points in mixed mode

2003-04-23 03:13  jal2

	* at76c503a/: at76c503-i3861.c, at76c503-rfmd.c: added new devices

2003-04-13 21:22  jal2

	* at76c503a/fw-rfmd-1.101.0-84.h: this version shall fix the JOIN
	  timeout when connecting to an 802.11g access point (i.e. an AP
	  whose OpRates list in the beacon is longer than 5 rates)

2003-04-13 01:18  jal2

	* at76c503a/at76c503-rfmd.c: added Actiontec 802UAT1 device (info
	  provided by Martin Garton)

2003-04-09 01:30  jal2

	* at76c503a/at76c503.c: added more debugging to track lock-up
	  problems; don't rescan in ad-hoc when we lost the beacon of the
	  peer

2003-04-05 20:58  jal2

	* at76c503a/usbdfu.c: fixed bug hanging SMP systems (hopefully)

2003-03-30 15:26  jal2

	* at76c503a/: at76c503-rfmd.c, at76c503.c: added new device Network
	  Everywhere NWU11B, added info() to announce registration of new
	  device

2003-03-30 15:10  jal2

	* at76c503a/scripts/fwbin2h: a tool to convert binary firmware
	  files (e.g. from Windows drivers) into C header files extracting
	  the version info

2003-03-28 01:25  jal2

	* at76c503a/: at76c503.c, at76c503.h: - fixed bug with restart
	  triggered by iwconfig: It seems that the STARTUP command must not
	  be sent while the device is busy with some other cmd (e.g. SCAN -
	  which takes a long time to complete).  The device got confused,
	  it did not send any AuthReq, only ProbeRequests until it got a
	  power cycle (guess some internal variables got mixed up and were
	  only resetted with internal firmware reload).

	  - added compilation time and cvs Id of at76c503.c into syslog

2003-03-23 00:27  jal2

	* at76c503a/: README, at76c503.c: iwconfig now restarts the device
	  with new params immediately -> no need for ifconfig calls anymore

2003-03-22 20:45  jal2

	* at76c503a/: at76c503.c, at76c503.h: replaced array dev->bss[] by
	  a linked list of struct bss_info (to work in env. with a lot of
	  BSS, e.g. CeBIT :-)

2003-03-22 19:04  jal2

	* at76c503a/: at76c503.c, at76c503.h: added iwspy support

2003-03-22 01:39  jal2

	* at76c503a/at76c503.c: Tim's 'link level patch', email, 2003-03-05
	  with small modification

2003-03-22 01:17  jal2

	* at76c503a/: README, at76c503.c, at76c503.h: Joerg: added shared
	  secret authentication, added iwpriv calls for preamble and auth
	  type

2003-03-22 01:15  jal2

	* at76c503a/at76c503-i3861.c: Russ Dill: new device SMC2662W v1

2003-03-22 01:06  jal2

	* at76c503a/at76c503.c: joerg's patch: hidden SSID, fixed ANY ssid
	  (email 2003-02-23)

2003-03-22 01:01  jal2

	* at76c503a/: at76c503.c, at76c503.h: Alex 'First phase of RX
	  optimization' patch (email, 2003-02-21)

2003-03-22 00:52  jal2

	* at76c503a/at76c503.c: alex' deprecation patch, email 2003-02-21

2003-03-22 00:47  jal2

	* at76c503a/.cvsignore: started

2003-03-22 00:44  jal2

	* at76c503a/: Makefile, README, at76c503-i3861.c, at76c503-i3863.c,
	  at76c503-rfmd.c, at76c503.c, at76c503.h, at76c503fw.c,
	  at76c505-rfmd.c, externalr.h, fw-i3861.h, fw-i3863.h, fw-r505.h,
	  fw-rfmd-0.100.4-16.h, fw-rfmd-0.90.2-140.h, internalr.h, rom2h.c,
	  usbdfu.c, usbdfu.h, scripts/fwconvert, scripts/fwversion:
	  Oliver's version 0.9

2003-03-21 23:53  jal2

	* at76c503a/: Makefile, README, at76c503-i3861.c, at76c503-i3863.c,
	  at76c503-rfmd.c, at76c503.c, at76c503.h, at76c505-rfmd.c,
	  usbdfu.c, vnet503-i3861.c, vnet503-i3863.c, vnet503-rfmd.c,
	  vnet505-rfmd.c: alex' version 0.8pas4

2003-03-21 23:50  jal2

	* at76c503a/: Makefile, at76c503.c, fw-i3861.h, fw-i3863.h,
	  fw-r505.h, scripts/fwconvert: alex' version 0.8pas3, error in fw
	  header files' generation fixed (and more)

2003-03-21 23:44  jal2

	* at76c503a/: Makefile, at76c503.c, at76c503.h, fw-i3861.h,
	  fw-i3863.h, fw-r505.h, vnet503-i3861.c, vnet503-i3863.c,
	  vnet503-rfmd.c, vnet505-rfmd.c, scripts/fwconvert,
	  scripts/fwversion: alex' version 0.8pas2

2003-03-21 23:34  jal2

	* at76c503a/: Makefile, README, at76c503.c, at76c503.h,
	  fw-rfmd-0.100.4-16.h, fw-rfmd-0.90.2-140.h, usbdfu.c, usbdfu.h,
	  vnet503-rfmd.c, externalr.h, internalr.h: alex' patch pas1

2003-03-21 23:21  jal2

	* at76c503a/: at76c503.c, at76c503.h, at76c503fw.c, COPYING,
	  externalr.h, ieee802_11.h, Makefile, internalr.h, README,
	  rom2h.c, usbdfu.c, usbdfu.h: Initial revision

2003-03-21 23:21  jal2

	* at76c503a/: at76c503.c, at76c503.h, at76c503fw.c, COPYING,
	  externalr.h, ieee802_11.h, Makefile, internalr.h, README,
	  rom2h.c, usbdfu.c, usbdfu.h: [no log message]