fpudiv.asm

来自「工欲善其事」· 汇编 代码 · 共 187 行

; #########################################################################
;
;                             FpuDiv
;
;##########################################################################

  ; -----------------------------------------------------------------------
  ; This procedure was written by Raymond Filiatreault, December 2002
  ;
  ;                           Src1 / Src2 -> Dest
  ;
  ; This FpuDiv function divides the Src1 number by the Src2 number
  ; with the FPU and returns the result as an 80-bit REAL number at the
  ; specified destination (the FPU itself or a memory location), unless an
  ; invalid operation is reported by the FPU or the definition of the
  ; parameters (with uID) is invalid.
  ;
  ; Either of the two sources can be an 80-bit REAL number from the FPU
  ; itself or from memory, an immediate DWORD value or one in memory,
  ; or one of the FPU constants.
  ;
  ; None of the sources are checked for validity. This is the programmer's
  ; responsibility.
  ;
  ; Only EAX is used to return error or success. All other registers are
  ; preserved.
  ;
  ; -----------------------------------------------------------------------

    .486
    .model flat, stdcall  ; 32 bit memory model
    option casemap :none  ; case sensitive

    include Fpu.inc

    .data
    
    tempdw  dd    0    
    stword  dw    0

    .code

; #########################################################################

FpuDiv proc public lpSrc1:DWORD, lpSrc2:DWORD, lpDest:DWORD, uID:DWORD
        
;%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
;
; Because a library is assembled before its functions are called, all
; references to external memory data must be qualified for the expected
; size of that data so that the proper code is generated.
;
;%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

;the FPU will be initialized only if neither of the two source parameters
;is taken from the FPU itself.

      fclex                   ;clear exception flags on FPU
      test  uID,SRC1_FPU or SRC2_FPU      ;is data taken from FPU?
      jnz   @F
      finit

;----------------------------------------
;check source for Src1 and load it to FPU
;----------------------------------------

@@:
      mov   eax,lpSrc1
      test  uID,SRC1_FPU      ;is Src1 taken from FPU?
      jnz   src2              ;check next parameter for Src2

      test  uID,SRC1_REAL     ;is Src1 an 80-bit REAL in memory?
      jz    @F                ;check next source for Src1
      fld   tbyte ptr [eax]
      jmp   src2              ;check next parameter for Src2

@@:
      test  uID,SRC1_DMEM     ;is Src1 a 32-bit integer in memory?
      jz    @F                ;check next source for Src1
      fild  dword ptr [eax]
      jmp   src2              ;check next parameter for Src2

@@:
      test  uID,SRC1_DIMM     ;is Src1 an immediate 32-bit integer?
      jz    @F                ;check next source for Src1
      mov   tempdw,eax
      fild  tempdw
      jmp   src2              ;check next parameter for Src2

@@:
      test  uID,SRC1_CONST    ;is Src1 one of the FPU constants?
      jnz   @F                ;otherwise no valid ID for Src1

srcerr:
      finit
      xor   eax,eax           ;error code
      ret

@@:
      test  eax,FPU_PI
      jz    @F
      fldpi
      jmp   src2
@@:
      test  eax,FPU_NAPIER
      jz    srcerr            ;no correct CONST flag for Src1
      fld1
      fldl2e
      fsub  st,st(1)
      f2xm1
      fadd  st,st(1)
      fscale
      fxch
      fstp  st(0)

;----------------------------------------
;check source for Src2 and load it to FPU
;----------------------------------------

src2:
      mov   eax,lpSrc2
      test  uID,SRC2_FPU      ;is Src2 taken from FPU?
      jz    @F                ;check next source for Src2
      test  uID,SRC1_FPU      ;is Src1 the same source
      jz    src21
      fld   st(0)             ;copy itself on FPU
src21:
      fxch
      jmp   dest0             ;go complete process

@@:
      test  uID,SRC2_REAL     ;is Src2 an 80-bit REAL in memory?
      jz    @F
      fld   tbyte ptr [eax]
      jmp   dest0             ;go complete process
@@:
      test  uID,SRC2_DMEM     ;is Src2 a 32-bit integer in memory?
      jz    @F
      fild  dword ptr [eax]
      jmp   dest0             ;go complete process
@@:
      test  uID,SRC2_DIMM     ;is Src2 an immediate 32-bit integer?
      jz    @F
      mov   tempdw,eax
      fild  tempdw
      jmp   dest0             ;go complete process
@@:
      test  uID,SRC2_CONST    ;is Src2 one of the FPU constants?
      jz    srcerr            ;no correct flag for Src2
      test  eax,FPU_PI
      jz    @F
      fldpi                   ;load pi (3.14159...) on FPU
      jmp   dest0             ;go complete process
@@:
      test  eax,FPU_NAPIER
      jz    srcerr            ;no correct CONST flag for Src2
      fld1
      fldl2e
      fsub  st,st(1)
      f2xm1
      fadd  st,st(1)
      fscale
      fxch
      fstp  st(0)

dest0:
      fdiv
      fstsw stword            ;retrieve exception flags from FPU
      fwait
      test  stword,1          ;test for invalid operation
      jnz   srcerr            ;clean-up and return error

      mov   eax,lpDest
      test  uID,DEST_FPU      ;check where result should be stored
      jnz   @F                ;leave result on FPU if so indicated
      fstp  tbyte ptr [eax]   ;store result at specified address

@@:
      or    al,1              ;to insure EAX!=0
      ret
    
FpuDiv endp

; #########################################################################

end