mac-timers_802_11e.cc

11e的草案 相信对相关研究人员很有用 如果你在这里搜到了

		       Scheduler::instance().clock(),mac->index_, MU(slottime),MU(rtime_[pri]),rtime_[pri]/slottime,floor(rtime_[pri]/slottime));
		rtime_[pri] = ceil(rtime_[pri]/slottime)*slottime;
	} else {
		if(BDEBUG==1) printf("3 now %4.8f Mac: %d round_time slot-duration: %2.2f rtime: %2.2f r/s %f ceil %f \n", 
		       Scheduler::instance().clock(),mac->index_, MU(slottime),MU(rtime_[pri]),rtime_[pri]/slottime, ceil(rtime_[pri]/slottime));
		rtime_[pri] = floor(rtime_[pri]/slottime)*slottime;
	}
	if(BDEBUG==1) printf("4 now %4.8f Mac: %d round_time slot-duration: %2.2f us remainder: %2.2f us slots %2.2f \n", 
	       Scheduler::instance().clock(),mac->index_,MU(slottime),MU(rmd), rtime_[pri]/slottime);
}

void
BackoffTimer_802_11e::handle(Event *)
{
	if(BDEBUG>2) printf("now %4.8f Mac: %d begin of BackoffTimer::handle\n",
			   Scheduler::instance().clock(), mac->index_);
	Scheduler &s = Scheduler::instance();
	paused_ = 0;
	double delay = INF;
	int prio = MAX_PRI + 1;
	
	for(int pri = 0; pri < MAX_PRI; pri++){
		
		double delay_ = rtime_[pri] + AIFSwait_[pri];
		if((delay_ < delay) && backoff_[pri] && !rounding(delay,delay_)) {
			delay = delay_;
			prio = pri;
		}
	}
	
	if(!EDCA && !rounding(s.clock(), stime_[prio] + rtime_[prio] + AIFSwait_[prio])){
	       	printf("now %4.8f Mac: %d BackoffTimer::handle but no priority matches ?! stime_[%d] %2.8f rtime_[%d] %2.2f AIFSwait_[%d] %2.2f \n",
		       s.clock(), mac->index_, prio, stime_[prio], prio, MU(rtime_[prio]), prio, MU(AIFSwait_[prio]));
		exit(1);
	}
	if(prio < MAX_PRI + 1) {
			busy_ = 0;
		        stime_[prio] = 0;
			rtime_[prio] = 0;
			backoff_[prio] = 0;
			AIFSwait_[prio] = 0.0;
			decremented_[prio]=0;
		//mac->backoffHandler(prio); now done further down at the end of Handler!	
	} else {
		cout<<"ERROR: wrong priority in BackoffTimer::handler()";
		exit(0);
	}
	
	busy_ = 0;
	bool another=0;

	for(int pri = 0; pri < MAX_PRI; pri++){
		if(backoff_[pri]) { //check if there is another backoff process
			
			if(rounding(rtime_[pri] + AIFSwait_[pri],delay)) {
				// check if other priority is not a postbackoff, 
				// i.e., packet to tx is available
				if(mac->pktTx_[pri]) {
					mac->inc_cw(pri);
					if(EDCA) {
						if(mac->inc_retryCounter(pri)) {
							// maximum retry limit exceeded,
							// deletion of packet done in inc_retryCounter(),
							// now reset Backoff variables
							stime_[pri] = 0;
							rtime_[pri] = 0;
							backoff_[pri] = 0;
							AIFSwait_[pri] = 0.0;
						} else {
							AIFSwait_[pri] = 0;
							stime_[pri] = s.clock(); //Start-Time
							rtime_[pri] = (Random::random() % (mac->getCW(pri) + 1)) * slottime; 
							backoff_[pri] = 1;
							another=1;
						}
					} else {
						AIFSwait_[pri] = 0;
						stime_[pri] = s.clock(); //Start-Time
						rtime_[pri] = (Random::random() % (mac->getCW(pri) + 1)) * slottime; 
						backoff_[pri] = 1;
						another=1;
					}
				} else {
					// end of postbackoff: reset stime_, rtime_, ...
					stime_[pri] = 0;
					rtime_[pri] = 0;
					backoff_[pri] = 0;
					AIFSwait_[pri] = 0.0;
				}
			} else
				another=1;
		}
	}	
        if(another) busy_=1;

	if(busy_ && !paused_){
		if(BDEBUG>2) printf("now %4.8f Mac: %d BackoffTimer::handle calling pause and restart\n",
				    Scheduler::instance().clock(), mac->index_);
		pause(); //pause + restart because the finished backoff could have been a postbackoff!
		restart();
	}

	mac->backoffHandler(prio);	
	if(BDEBUG>2) printf("now %4.8f Mac: %d end of BackoffTimer::handle\n",
			   Scheduler::instance().clock(), mac->index_);
}

void
BackoffTimer_802_11e::start(int pri, int cw, int idle)
{
	if(BDEBUG>2) printf("now %4.8f Mac: %d in BackoffTimer::start for pri %d busy_ %d \n",
			    Scheduler::instance().clock(), mac->index_,pri, busy_);

	Scheduler &s = Scheduler::instance();
	
	if(busy_) { //already a backoff running!
		stime_[pri] = s.clock(); //Start-Time
		rtime_[pri] = (Random::random() % (cw + 1)) * slottime;
		AIFSwait_[pri] = 0.0;
		decremented_[pri]=0;
		if(BDEBUG>2)printf("now: %4.8f Mac: %d starting backoff during others: setting AIFS_[%d] to zero\n",
		       s.clock(), mac->index_, pri);
		backoff_[pri] = 1;
		if(idle == 0){
			if(!paused_){
				pause();
			}
		}
		else {
			assert(rtime_[pri] >= 0.0);
			if(!paused_) {
				pause();
				AIFSwait_[pri] = mac->getAIFS(pri); 
				//cout<<"Mac "<<mac->index_<<": now: "<<Scheduler::instance().clock()<<"pause and restart for prio "<<pri<<"\n";
				restart();
			}
		}
		if(BDEBUG>2) printf("now %4.8f Mac: %d end of BackoffTimer::start stime_[%d] %4.8f rtime_[%d] %2.2f AIFSwait_[%d] %2.2f\n",
				    Scheduler::instance().clock(), mac->index_, pri, stime_[pri], pri, MU(rtime_[pri]), pri, MU(AIFSwait_[pri]));
	} else {
		backoff_[pri] = 1;
		busy_ = 1;
		stime_[pri] = s.clock(); //Start-Time
		rtime_[pri] = (Random::random() % (cw + 1)) * slottime;

		AIFSwait_[pri] = mac->getAIFS(pri);  

		if(idle == 0){
			paused_ = 1;
		}
		else {
			assert(rtime_[pri] >= 0.0);
			s.schedule(this, &intr, rtime_[pri] + AIFSwait_[pri]);
		}
		if(BDEBUG>2) printf("now %4.8f Mac: %d end of BackoffTimer::start, timer scheduled stime_[%d] %4.8f rtime_[%d] %2.8f AIFSwait_[%d] %2.2f \n",
				    Scheduler::instance().clock(), mac->index_, pri, stime_[pri], pri, MU(rtime_[pri]), pri, MU(AIFSwait_[pri]));
	}
}
   
inline bool BackoffTimer_802_11e::rounding(double x, double y)
{
	if(BDEBUG>2) printf("now %4.8f Mac: %d in BackoffTimer::rounding\n",
			   Scheduler::instance().clock(), mac->index_);
	/*
	 * check whether x is within y +/- 1e-12 
	 */
	if(x > y && x < y + ROUND )
		return 1;
	else if(x < y && x > y - ROUND )
		return 1;
	else if (x == y)
		return 1;
	else 
		return 0;
}

void
BackoffTimer_802_11e::pause()
{
	Scheduler &s = Scheduler::instance();
	//the caculation below make validation pass for linux though it
	// looks dummy

	for (int pri = 0; pri < MAX_PRI; pri++) {
		if(backoff_[pri] && !rounding(stime_[pri],s.clock()) && !rounding(decremented_[pri],s.clock())) {
			double st = s.clock();            //now
			double rt = stime_[pri] + AIFSwait_[pri]; // start-Time of backoff + waiting time
			double sr = st - rt; // is < 0,  if stime is back for less than AIFSwait, thus a slot 
			                     // decrement must not appear
		
			int slots =0;
		
			if(BDEBUG>2) printf("now %4.8f Mac: %d BackoffTimer::pause beginning stime_[%d] %4.8f rtime_[%d] %2.2f AIFSwait[%d] %2.2f slottime %2.2f diff/slottime %2.2f \n",
					    s.clock(), mac->index_, pri, stime_[pri], pri, MU(rtime_[pri]), pri, MU(AIFSwait_[pri]),MU(slottime), sr/slottime);
			if(rounding(sr,0.0)){ // now - stime is equal to AIFSWAIT
				// include EDCA rule: slot decrement due to full AIFS period
				if(EDCA && (rtime_[pri] > slottime) ) {
					rtime_[pri] -= slottime;
					/* P802.11e/D13.0
					 * Section 9.9.1.3:
					 * one and only one of the following actions is allowed at slot boundaries:
					 * - decrement of backoff timer, or
					 * - initiate transmission, or
					 * - backoff procedure due to internal collision, or
					 * - do nothing.
					 * Thus we need to assure that a station does not initiate a transmission 
					 * immediately after decreasing rtime.The check is done in restart()/resume() 
					 * by comparing the time of decrement and simulated time.
					 */
					decremented_[pri]=st; // time of decrement 
				} else if (!rounding(stime_[pri],st)){ 
					// this backoff has just been started in this moment, while others are busy,
					// do nothing
					if(BDEBUG>2) printf("now %4.8f Mac: %d BackoffTimer::pause new EDCA rule stime_[%d] %4.8f rtime_[%d] %2.2f AIFSwait[%d] %2.2f slottime %2.2f diff/slottime %2.2f \n",
							    s.clock(), mac->index_, pri, stime_[pri], pri, MU(rtime_[pri]), pri, MU(AIFSwait_[pri]),MU(slottime), sr/slottime); 

				} else {
					if(BDEBUG>2) printf("now %4.8f Mac: %d BackoffTimer::pause new EDCA rule, but rtime < slottime! stime_[%d] %4.8f rtime_[%d] %2.2f AIFSwait[%d] %2.2f slottime %2.2f diff/slottime %2.2f\n",
							    s.clock(), mac->index_, pri, stime_[pri], pri, MU(rtime_[pri]), pri, MU(AIFSwait_[pri]),MU(slottime), sr/slottime); 
					exit(1);
				}
			} else if(sr > 0 + ROUND) {
				slots = int (floor((sr + ROUND)/slottime)); 
			}

			assert(busy_ && !paused_);
			if( (rtime_[pri] - (slots * slottime) > 0.0) || (rtime_[pri] - (slots * slottime) > ROUND) ) {
				if(EDCA)rtime_[pri] -= ((slots + 1) * slottime); // +1 slot for new EDCA rule 
				else rtime_[pri] -= (slots * slottime); 
				decremented_[pri]=st;
				assert(rtime_[pri] >= 0.0);	
			} else{
				if(rounding(rtime_[pri] - (slots * slottime),0.0)) { // difference within rounding errors 
					rtime_[pri] = 0;
					decremented_[pri]=st;
				} else {
					printf("ERROR in BackoffTimer::pause(), rtime_[%d]  %2.4f sr %2.4f slots: %d, SlotTime: %2.4f slots*slottime %2.4f \n", 
					       pri, MU(rtime_[pri]), MU(sr), slots, slottime, MU(slots*slottime));
					exit(0);
				}	
			}
			/*
			 * decrease of AIFSwait is required because pause() and restart() can
			 * be called immediately afterwards (in case of postbackoff), so that
			 * normal backoff operation must proceed
			 */
			if(st - stime_[pri] >= mac->getAIFS(pri)) AIFSwait_[pri] = 0.0;
			else{
				AIFSwait_[pri] -= st - stime_[pri];
				if(AIFSwait_[pri] < 0) AIFSwait_[pri] = 0;
			}
			if(BDEBUG>2) printf("now %4.8f Mac: %d BackoffTimer::pause end stime_[%d] %4.8f rtime_[%d] %2.2f AIFSwait[%d] %2.2f slottime %2.2f diff/slottime %2.2f \n",
					    s.clock(), mac->index_,pri, stime_[pri], pri, MU(rtime_[pri]), pri, MU(AIFSwait_[pri]),MU(slottime), sr/slottime);
		}
	}
	s.cancel(&intr);
	paused_ = 1;
}


void
BackoffTimer_802_11e::resume()
{
	if(BDEBUG>2) printf("now %4.8f Mac: %d in BackoffTimer::resume\n",
			   Scheduler::instance().clock(), mac->index_);
	double delay = INF;
	int prio = MAX_PRI + 1;
	Scheduler &s = Scheduler::instance();
	
	for(int pri = 0; pri < MAX_PRI; pri++){
		if(backoff_[pri]){
			double delay_=0;
			round_time(pri);
			AIFSwait_[pri] = mac->getAIFS(pri);
			stime_[pri] = s.clock();
			if(EDCA && rounding(decremented_[pri],s.clock())) delay_ = rtime_[pri] + AIFSwait_[pri] + slottime;
			else delay_ = rtime_[pri] + AIFSwait_[pri];
			//decremented_[pri]=0;
			if((delay_ < delay) && backoff_[pri]) {
				delay = delay_;
				prio = pri;
			}
			if(BDEBUG>2) printf("now %4.8f Mac: %d BackoffTimer::resume check for smallest delay stime_[%d] %4.8f rtime_[%d] %2.2f AIFSwait[%d] %2.2f slottime %2.2f \n",
					    s.clock(), mac->index_, pri, stime_[pri], pri, MU(rtime_[pri]), pri, MU(AIFSwait_[pri]),MU(slottime));
		}
	}
	if(prio < MAX_PRI + 1) {
		assert(rtime_[prio] + AIFSwait_[prio] >=0);
		s.schedule(this, &intr, rtime_[prio] + AIFSwait_[prio]);
		paused_ = 0;
	} else {
		cout<<"ERROR: wrong priority in BackoffTimer::resume() \n";
		exit(0);
	}
	if(BDEBUG>2) printf("now %4.8f Mac: %d BackoffTimer::resume next: prio %d stime_[%d] %4.8f rtime_[%d] %2.2f AIFSwait[%d] %2.2f slottime %2.2f \n",
			    s.clock(), mac->index_,prio, prio, stime_[prio], prio, MU(rtime_[prio]), prio, MU(AIFSwait_[prio]),MU(slottime));
}

void
BackoffTimer_802_11e::restart()
{
	if(BDEBUG>2) printf("now %4.8f Mac: %d in BackoffTimer::restart\n",
			   Scheduler::instance().clock(), mac->index_);
	busy_ = 1;
	double delay = INF;
	int prio = MAX_PRI + 1;
	Scheduler &s = Scheduler::instance();
	
	for(int pri = 0; pri < MAX_PRI; pri++){
		if(backoff_[pri]) {
			double delay_=0;
			round_time(pri);
			stime_[pri] = s.clock();
			if(EDCA && rounding(decremented_[pri],s.clock())) delay_ = rtime_[pri] + AIFSwait_[pri] + slottime;
			else delay_ = rtime_[pri] + AIFSwait_[pri];
			//decremented_[pri]=0;
			if(delay_ < delay) {
				delay = delay_;
				prio = pri;
			}
		}
	}
	if(prio < MAX_PRI + 1) {
		assert(rtime_[prio] + AIFSwait_[prio] >=0);
		s.schedule(this, &intr, rtime_[prio] + AIFSwait_[prio]);
		paused_ = 0;
	} else {
		cout<<"ERROR: wrong priority in BackoffTimer::restart() \n";
		exit(0);
	}
}


int
BackoffTimer_802_11e::backoff(int pri)
{
	return backoff_[pri];
}

/*
 * Timer for throughput measurement 
 */ 
void AkaroaTimer::start()
{
	Scheduler &s = Scheduler::instance();
	s.schedule(this, &intr,mac->interval_);
}

void AkaroaTimer::handle(Event *)
{
	mac->calc_throughput();
}