⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 hosts.h

📁 这个是uClinux下的ieee1394驱动
💻 H
字号:
#ifndef _IEEE1394_HOSTS_H#define _IEEE1394_HOSTS_H#include <linux/wait.h>#include <linux/tqueue.h>#include <linux/list.h>#include <asm/semaphore.h>#include "ieee1394_types.h"#include "csr.h"struct hpsb_packet;struct hpsb_host {        struct list_head host_list;        void *hostdata;        atomic_t generation;        int refcount;        struct list_head pending_packets;        spinlock_t pending_pkt_lock;        struct tq_struct timeout_tq;        /* A bitmask where a set bit means that this tlabel is in use.         * FIXME - should be handled per node instead of per bus. */        u32 tlabel_pool[2];        struct semaphore tlabel_count;        spinlock_t tlabel_lock;	u32 tlabel_current;        unsigned char iso_listen_count[64];        int node_count; /* number of identified nodes on this bus */        int selfid_count; /* total number of SelfIDs received */	int nodes_active; /* number of nodes that are actually active */        nodeid_t node_id; /* node ID of this host */        nodeid_t irm_id; /* ID of this bus' isochronous resource manager */        nodeid_t busmgr_id; /* ID of this bus' bus manager */        /* this nodes state */        unsigned in_bus_reset:1;        unsigned is_shutdown:1;        /* this nodes' duties on the bus */        unsigned is_root:1;        unsigned is_cycmst:1;        unsigned is_irm:1;        unsigned is_busmgr:1;        int reset_retries;        quadlet_t *topology_map;        u8 *speed_map;        struct csr_control csr;        struct hpsb_host_driver *driver;	struct pci_dev *pdev;};enum devctl_cmd {        /* Host is requested to reset its bus and cancel all outstanding async         * requests.  If arg == 1, it shall also attempt to become root on the         * bus.  Return void. */        RESET_BUS,        /* Arg is void, return value is the hardware cycle counter value. */        GET_CYCLE_COUNTER,        /* Set the hardware cycle counter to the value in arg, return void.         * FIXME - setting is probably not required. */        SET_CYCLE_COUNTER,        /* Configure hardware for new bus ID in arg, return void. */        SET_BUS_ID,        /* If arg true, start sending cycle start packets, stop if arg == 0.         * Return void. */        ACT_CYCLE_MASTER,        /* Cancel all outstanding async requests without resetting the bus.         * Return void. */        CANCEL_REQUESTS,        /* Decrease host usage count if arg == 0, increase otherwise.  Return         * 1 for success, 0 for failure.  Increase usage may fail if the driver         * is in the process of shutting itself down.  Decrease usage can not         * fail. */        MODIFY_USAGE,        /* Start or stop receiving isochronous channel in arg.  Return void.         * This acts as an optimization hint, hosts are not required not to         * listen on unrequested channels. */        ISO_LISTEN_CHANNEL,        ISO_UNLISTEN_CHANNEL};enum reset_types {        /* 166 microsecond reset -- only type of reset available on           non-1394a capable IEEE 1394 controllers */        LONG_RESET,        /* Short (arbitrated) reset -- only available on 1394a capable           IEEE 1394 capable controllers */        SHORT_RESET};struct hpsb_host_driver {	const char *name;        /* This function must store a pointer to the configuration ROM into the         * location referenced to by pointer and return the size of the ROM. It         * may not fail.  If any allocation is required, it must be done         * earlier.         */        size_t (*get_rom) (struct hpsb_host *host, const quadlet_t **pointer);        /* This function shall implement packet transmission based on         * packet->type.  It shall CRC both parts of the packet (unless         * packet->type == raw) and do byte-swapping as necessary or instruct         * the hardware to do so.  It can return immediately after the packet         * was queued for sending.  After sending, hpsb_sent_packet() has to be         * called.  Return 0 for failure.         * NOTE: The function must be callable in interrupt context.         */        int (*transmit_packet) (struct hpsb_host *host,                                 struct hpsb_packet *packet);        /* This function requests miscellanous services from the driver, see         * above for command codes and expected actions.  Return -1 for unknown         * command, though that should never happen.         */        int (*devctl) (struct hpsb_host *host, enum devctl_cmd command, int arg);        /* This function is mainly to redirect local CSR reads/locks to the iso         * management registers (bus manager id, bandwidth available, channels         * available) to the hardware registers in OHCI.  reg is 0,1,2,3 for bus         * mgr, bwdth avail, ch avail hi, ch avail lo respectively (the same ids         * as OHCI uses).  data and compare are the new data and expected data         * respectively, return value is the old value.         */        quadlet_t (*hw_csr_reg) (struct hpsb_host *host, int reg,                                 quadlet_t data, quadlet_t compare);};/* core internal use */void register_builtin_lowlevels(void);/* high level internal use */struct hpsb_highlevel;void hl_all_hosts(void (*function)(struct hpsb_host*));/* * In order to prevent hosts from unloading, use hpsb_ref_host().  This prevents * the host from going away (e.g. makes module unloading of the driver * impossible), but still can not guarantee it (e.g. PC-Card being pulled by the * user).  hpsb_ref_host() returns false if host could not be locked.  If it is * successful, host is valid as a pointer until hpsb_unref_host() (not just * until after remove_host). */int hpsb_ref_host(struct hpsb_host *host);void hpsb_unref_host(struct hpsb_host *host);struct hpsb_host *hpsb_alloc_host(struct hpsb_host_driver *drv, size_t extra);void hpsb_add_host(struct hpsb_host *host);void hpsb_remove_host(struct hpsb_host *h);#endif /* _IEEE1394_HOSTS_H */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -