usb100.h

单片机MSP430与PDIUSBD12的固件代码,PDIUSBd12的驱动以及上位机与usb之间的通讯测试程序(使用easyd12.dll编写),已经完全编译通过,测试成功的图片见文件内.

#ifndef   __USB100_H__
#define   __USB100_H__


#define MAXIMUM_USB_STRING_LENGTH 255

// values for the bits returned by the USB GET_STATUS command
#define USB_GETSTATUS_SELF_POWERED                0x01
#define USB_GETSTATUS_REMOTE_WAKEUP_ENABLED       0x02


#define USB_DEVICE_DESCRIPTOR_TYPE                0x01
#define USB_CONFIGURATION_DESCRIPTOR_TYPE         0x02
#define USB_STRING_DESCRIPTOR_TYPE                0x03
#define USB_INTERFACE_DESCRIPTOR_TYPE             0x04
#define USB_ENDPOINT_DESCRIPTOR_TYPE              0x05
#define USB_POWER_DESCRIPTOR_TYPE                 0x06

#define USB_DESCRIPTOR_MAKE_TYPE_AND_INDEX(d, i) ((unsigned int)((unsigned int)d<<8 | i))

//
// Values for bmAttributes field of an
// endpoint descriptor
//

#define USB_ENDPOINT_TYPE_MASK                    0x03

#define USB_ENDPOINT_TYPE_CONTROL                 0x00
#define USB_ENDPOINT_TYPE_ISOCHRONOUS             0x01
#define USB_ENDPOINT_TYPE_BULK                    0x02
#define USB_ENDPOINT_TYPE_INTERRUPT               0x03


//
// definitions for bits in the bmAttributes field of a 
// configuration descriptor.
//
#define USB_CONFIG_POWERED_MASK                   0xc0

#define USB_CONFIG_BUS_POWERED                    0x80
#define USB_CONFIG_SELF_POWERED                   0x40
#define USB_CONFIG_REMOTE_WAKEUP                  0x20

//
// Endpoint direction bit, stored in address
//

#define USB_ENDPOINT_DIRECTION_MASK               0x80

// test direction bit in the bEndpointAddress field of
// an endpoint descriptor.
#define USB_ENDPOINT_DIRECTION_OUT(addr)          (!((addr) & USB_ENDPOINT_DIRECTION_MASK))
#define USB_ENDPOINT_DIRECTION_IN(addr)           ((addr) & USB_ENDPOINT_DIRECTION_MASK)

//
// USB defined request codes
// see chapter 9 of the USB 1.0 specifcation for
// more information.
//

// These are the correct values based on the USB 1.0
// specification

#define USB_REQUEST_GET_STATUS                    0x00
#define USB_REQUEST_CLEAR_FEATURE                 0x01

#define USB_REQUEST_SET_FEATURE                   0x03

#define USB_REQUEST_SET_ADDRESS                   0x05
#define USB_REQUEST_GET_DESCRIPTOR                0x06
#define USB_REQUEST_SET_DESCRIPTOR                0x07
#define USB_REQUEST_GET_CONFIGURATION             0x08
#define USB_REQUEST_SET_CONFIGURATION             0x09
#define USB_REQUEST_GET_INTERFACE                 0x0A
#define USB_REQUEST_SET_INTERFACE                 0x0B
#define USB_REQUEST_SYNC_FRAME                    0x0C


//
// defined USB device classes
//


#define USB_DEVICE_CLASS_RESERVED           0x00
#define USB_DEVICE_CLASS_AUDIO              0x01
#define USB_DEVICE_CLASS_COMMUNICATIONS     0x02
#define USB_DEVICE_CLASS_HUMAN_INTERFACE    0x03
#define USB_DEVICE_CLASS_MONITOR            0x04
#define USB_DEVICE_CLASS_PHYSICAL_INTERFACE 0x05
#define USB_DEVICE_CLASS_POWER              0x06
#define USB_DEVICE_CLASS_PRINTER            0x07
#define USB_DEVICE_CLASS_STORAGE            0x08
#define USB_DEVICE_CLASS_HUB                0x09
#define USB_DEVICE_CLASS_VENDOR_SPECIFIC    0xFF

//
// USB defined Feature selectors
//

#define USB_FEATURE_ENDPOINT_STALL          0x0000
#define USB_FEATURE_REMOTE_WAKEUP           0x0001
#define USB_FEATURE_POWER_D0                0x0002
#define USB_FEATURE_POWER_D1                0x0003
#define USB_FEATURE_POWER_D2                0x0004
#define USB_FEATURE_POWER_D3                0x0005

typedef struct _USB_DEVICE_DESCRIPTOR {
    unsigned char bLength;
    unsigned char bDescriptorType;
    unsigned int bcdUSB;
    unsigned char bDeviceClass;
    unsigned char bDeviceSubClass;
    unsigned char bDeviceProtocol;
    unsigned char bMaxPacketSize0;
    unsigned int idVendor;
    unsigned int idProduct;
    unsigned int bcdDevice;
    unsigned char iManufacturer;
    unsigned char iProduct;
    unsigned char iSerialNumber;
    unsigned char bNumConfigurations;
} USB_DEVICE_DESCRIPTOR, *PUSB_DEVICE_DESCRIPTOR;

typedef struct _USB_ENDPOINT_DESCRIPTOR {
    unsigned char bLength;
    unsigned char bDescriptorType;
    unsigned char bEndpointAddress;
    unsigned char bmAttributes;
    unsigned int wMaxPacketSize;
    unsigned char bInterval;
} USB_ENDPOINT_DESCRIPTOR, *PUSB_ENDPOINT_DESCRIPTOR;

//
// values for bmAttributes Field in
// USB_CONFIGURATION_DESCRIPTOR
//

#define BUS_POWERED                           0x80
#define SELF_POWERED                          0x40
#define REMOTE_WAKEUP                         0x20

typedef struct _USB_INTERFACE_DESCRIPTOR {
    unsigned char bLength;
    unsigned char bDescriptorType;
    unsigned char bInterfaceNumber;
    unsigned char bAlternateSetting;
    unsigned char bNumEndpoints;
    unsigned char bInterfaceClass;
    unsigned char bInterfaceSubClass;
    unsigned char bInterfaceProtocol;
    unsigned char iInterface;
} USB_INTERFACE_DESCRIPTOR, *PUSB_INTERFACE_DESCRIPTOR;

typedef struct _USB_CONFIGURATION_DESCRIPTOR {
    unsigned char bLength_cfg;
    unsigned char bDescriptorType_cfg;
    unsigned int wTotalLength;
    unsigned char bNumInterfaces;
    unsigned char bConfigurationValue;
    unsigned char iConfiguration;
    unsigned char bmAttributes_cfg;
    unsigned char MaxPower;
    
    
    unsigned char Zero_2;
    
    //USB_INTERFACE_DESCRIPTOR  InterfaceDescr;
    unsigned char bLength_int;
    unsigned char bDescriptorType_int;
    unsigned char bInterfaceNumber;
    unsigned char bAlternateSetting;
    unsigned char bNumEndpoints;
    unsigned char bInterfaceClass;
    unsigned char bInterfaceSubClass;
    unsigned char bInterfaceProtocol;
    unsigned char iInterface;
    
    
    unsigned char Zero_3;
    
    //USB_ENDPOINT_DESCRIPTOR   EP1_TXDescr;
    unsigned char bLength_ep1tx;
    unsigned char bDescriptorType_ep1tx;
    unsigned char bEndpointAddress_ep1tx;
    unsigned char bmAttributes_ep1tx;
    unsigned int wMaxPacketSize_ep1tx;
    unsigned char bInterval_ep1tx;
    
    
    unsigned char Zero_4;
    
    //USB_ENDPOINT_DESCRIPTOR   EP1_RXDescr;
    unsigned char bLength_ep1rx;
    unsigned char bDescriptorType_ep1rx;
    unsigned char bEndpointAddress_ep1rx;
    unsigned char bmAttributes_ep1rx;
    unsigned int wMaxPacketSize_ep1rx;
    unsigned char bInterval_ep1rx;
    
    
    unsigned char Zero_5;
    
    //USB_ENDPOINT_DESCRIPTOR   EP2_TXDescr;
    unsigned char bLength_ep2tx;
    unsigned char bDescriptorType_ep2tx;
    unsigned char bEndpointAddress_ep2tx;
    unsigned char bmAttributes_ep2tx;
    unsigned int wMaxPacketSize_ep2tx;
    unsigned char bInterval_ep2tx;
    
    
    unsigned char Zero_6;
    
    //USB_ENDPOINT_DESCRIPTOR   EP2_RXDescr;
    unsigned char bLength_ep2rx;
    unsigned char bDescriptorType_ep2rx;
    unsigned char bEndpointAddress_ep2rx;
    unsigned char bmAttributes_ep2rx;
    unsigned int wMaxPacketSize_ep2rx;
    unsigned char bInterval_ep2rx;
    
    
    unsigned char Zero_7;
    
} USB_CONFIGURATION_DESCRIPTOR, *PUSB_CONFIGURATION_DESCRIPTOR;

typedef struct _USB_STRING_DESCRIPTOR {
    unsigned char bLength;
    unsigned char bDescriptorType;
    unsigned char bString[1];
} USB_STRING_DESCRIPTOR, *PUSB_STRING_DESCRIPTOR;

//
// USB power descriptor added to core specification
//

#define USB_SUPPORT_D0_COMMAND      0x01
#define USB_SUPPORT_D1_COMMAND      0x02
#define USB_SUPPORT_D2_COMMAND      0x04
#define USB_SUPPORT_D3_COMMAND      0x08

#define USB_SUPPORT_D1_WAKEUP       0x10
#define USB_SUPPORT_D2_WAKEUP       0x20


typedef struct _USB_POWER_DESCRIPTOR {
    unsigned char bLength;
    unsigned char bDescriptorType;
    unsigned char bCapabilitiesFlags;
    unsigned int EventNotification;
    unsigned int D1LatencyTime;
    unsigned int D2LatencyTime;
    unsigned int D3LatencyTime;
    unsigned char PowerUnit;
    unsigned int D0PowerConsumption;
    unsigned int D1PowerConsumption;
    unsigned int D2PowerConsumption;
} USB_POWER_DESCRIPTOR, *PUSB_POWER_DESCRIPTOR;


typedef struct _USB_COMMON_DESCRIPTOR {
    unsigned char bLength;
    unsigned char bDescriptorType;
} USB_COMMON_DESCRIPTOR, *PUSB_COMMON_DESCRIPTOR;


//
// Standard USB HUB definitions 
//
// See Chapter 11
//

typedef struct _USB_HUB_DESCRIPTOR {
    unsigned char        bDescriptorLength;      // Length of this descriptor
    unsigned char        bDescriptorType;        // Hub configuration type
    unsigned char        bNumberOfPorts;         // number of ports on this hub
    unsigned int         wHubCharacteristics;    // Hub Charateristics
    unsigned char        bPowerOnToPowerGood;    // port power on till power good in 2ms
    unsigned char        bHubControlCurrent;     // max current in mA
    //
    // room for 255 ports power control and removable bitmask
    unsigned char        bRemoveAndPowerMask[64];
} USB_HUB_DESCRIPTOR, *PUSB_HUB_DESCRIPTOR;

#endif   /* __USB100_H__ */