lcdconf_1611_m4_m240x160.h

来自「ucgui V3.98 是目前网络上相对较新的ucgui高版本源码啦。有兴趣的可」· C头文件 代码 · 共 69 行

/*
*********************************************************************************************************
*                                             uC/GUI V3.98
*                        Universal graphic software for embedded applications
*
*                       (c) Copyright 2002, Micrium Inc., Weston, FL
*                       (c) Copyright 2002, SEGGER Microcontroller Systeme GmbH
*
*              礐/GUI is protected by international copyright laws. Knowledge of the
*              source code may not be used to write a similar product. This file may
*              only be used in accordance with a license and should not be redistributed
*              in any way. We appreciate your understanding and fairness.
*
----------------------------------------------------------------------
File        : LCDConf_1611_M4_M240x160.H
Purpose     : Sample configuration file
----------------------------------------------------------------------
*/

#ifndef LCDCONF_H
#define LCDCONF_H

/*********************************************************************
*
*       General configuration of LCD
*
**********************************************************************
*/

#define LCD_CONTROLLER 1800

#define LCD_XSIZE            (240)      /* X-resolution of LCD, Logical coor. */
#define LCD_YSIZE            (160)      /* Y-resolution of LCD, Logical coor. */

#define LCD_BITSPERPIXEL     (4)

char LCD_X_Read00  (void);
char LCD_X_Read01  (void);
void LCD_X_Write00 (char c);
void LCD_X_Write01 (char c);
void LCD_X_WriteM01(char * pData, int NumBytes);
#define LCD_READ_A1(Byte)              Byte = LCD_X_Read01()
#define LCD_READ_A0()                  Byte = LCD_X_Read00()
#define LCD_WRITE_A1(Byte)             LCD_X_Write01(Byte)
#define LCD_WRITE_A0(Byte)             LCD_X_Write00(Byte)
#define LCD_WRITEM_A1(pData, NumBytes) LCD_X_WriteM01(pData, NumBytes)

/*********************************************************************
*
*       Initialisation macro
*
**********************************************************************
*/

#define LCD_INIT_CONTROLLER()                                \
  LCD_X_Init();                                              \
  LCD_WRITE_A0(0xeb); /* SET LCD BIAS RATIO: 12 */           \
  LCD_WRITE_A0(0x81); /* SET VBIAS POTENTIOMETER AND GAIN */ \
  LCD_WRITE_A0(0x0c);                                        \
  LCD_WRITE_A0(0xa7); /* SET INVERSE DISPLAY */              \
  LCD_WRITE_A0(0xd6); /* SET GRAY SCALE MODE */              \
  LCD_WRITE_A0(0xc2); /* SET LCD MAPPING CONTROL */          \
  LCD_WRITE_A0(0xa3); /* SET LINE RATE */                    \
  LCD_WRITE_A0(0xaf); /* SET DISPLAY ENABLE */               \


#endif /* LCDCONF_H */