changelog

基于ecos的redboot

2001-02-20  Jonathan Larmour  <[e-mail]>

	* common/eCosTestClient.cpp (LocateExecutables): Add /sbin and
	/usr/sbin to path before trying to run fuser.

2000-09-28  Jesper Skov  <[e-mail]>

	* common/eCosTestSerialFilter.cpp (CMD_TestBinary): Reset counter
	for each test so the failure data is the same from two different
	runs of the test.

2000-09-15  Jesper Skov  <[e-mail]>

	* common/ser_filter.cpp (main): Don't require ResourceServer.

	* common/Makefile.am: Added ser_filter handling.
	* common/Makefile.in: Ditto.
	* common/configure: Ditto.
	* common/configure.in: Ditto.
	* common/eCosTest.cpp: Fix typo.

2000-08-16  Jonathan Larmour  <[e-mail]>

	* common/ser_filter.cpp (main): Clean up warning

2000-08-08  Jonathan Larmour  <[e-mail]>

	* common/eCosTestSerialFilter.h: Update flow_cfg_t values for correct
	target settings

2000-08-01  Jonathan Larmour  <[e-mail]>

	* common/eCosTestSerialFilter.cpp (PrintHex): Print out more printable
	chars
	(SetConfig): Support flow control
	(ParseConfig): Support target setting of flow control
	(CMD_TestBinary): Don't output XON/XOFF. Output 255 chars not 256
	to make buffer problems more obvious.

	* common/eCosTestDownloadFilter.h: Allow SET_VALUE to set optional args
	* common/eCosTestSerialFilter.h: Allow SET_VALUE to set optional args
	Also add flow_cfg_t type and flags member in ser_cfg_t for flow control

2000-07-24  Jonathan Larmour  <[e-mail]>

	* common/eCosTestSerialFilter.cpp (FilterFunctionProper): 
	Store output for tracing up so it is output a packet at a time.
	As well as clarifying the output, it is required when sending to
	GDB to prevent the trace 'O' packets in the middle of target packets.
	(CMD_TestBinary): Delay to allow target to read in checksum. This
	prevents overruns before finishing reading the checksum masking
	the real cause of the problem.
	(CeCosTestSerialFilter): Initialise stored trace buffer members

	* common/eCosTestSerialFilter.h: Add trace buffer members for above
	to CeCosTestSerialFilter

2000-06-19  John Dallaway  <[e-mail]>

	* unix/Makefile:

	Link with -lposix4 under Solaris for sched_yield().

2000-06-16  Jonathan Larmour  <[e-mail]>

	* common/eCosTestDownloadFilter.cpp: Remove RCS id tags
	* common/eCosTestMonitorFilter.cpp: Ditto
	* common/eCosTestSerialFilter.cpp: Ditto

2000-06-15  John Dallaway  <[e-mail]>

	* common/eCosTest.cpp:

	Modify CeCosTest construvtor to use GetEnvironmentVariable()
	rather than _tgetenv() under Win32. For some unknown reason,
	_tgetenv() is not returning the correct version of PATH.

	* common/eCosTestPlatform.cpp:

	Modify SaveToRegistry() to save all test platform attributes.

2000-05-03  Bart Veer  <[e-mail]>

	* common/permtest.cxx (find_ptest):
	Do a little bit of searching for the permutation file.
	Catch errors and give a diagnostic, rather than aborting because
	of an uncaught C++ exception.

2000-04-14 Simon FitzMaurice <[e-mail]>
  * common\ResetAttributes.cpp : do not carry forward values for skipped fields in reset strings
  * common\eCosTest.cpp : Avoid overflow in socket timeouts
    
2000-04-13  Jesper Skov  <[e-mail]>

	* unix/Makefile: add randfile

2000-04-13  Jesper Skov  <[e-mail]>

	* common/eCosTestDownloadFilter.cpp: Cast Write arguments to void*.

2000-04-13 Simon FitzMaurice <[e-mail]>
  * common\ResetAttributes.cpp
    common\eCosTest.cpp
    common\eCosTestClient.cpp

  Ensure socket timeout matches on_off/off_on delay for reset
  Correct parsing of eCosTestClient delay args.
  Use remote resource to determine baud rate for default download timeout.

2000-04-13 Simon FitzMaurice <[e-mail]>
  * common\ResetAttributes.cpp
    common\eCosTest.cpp
    common\eCosTest.h
    common\eCosTestClient.cpp
    common\eCosTestServer.cpp
    common\eCosTestUtils.cpp
    common\rgdb.cpp
    common\summlog.cpp
    common\x10reset.cpp
    win32\eCosTest.dsp

  Tidy up reset output.
  Police use of -f and -r switches more accurately.
  Set default timeout in all cases.

2000-04-11 Simon FitzMaurice <[e-mail]>
  * common\ResetAttributes.cpp
    common\ResetAttributes.h
    common\ResourceServer.cpp
    common\TestResource.cpp
    common\TestResource.h
    common\X10.h
    common\X10d.cpp
    common\eCosTest.cpp
    common\eCosTest.h
    common\eCosTestClient.cpp
    common\eCosTestDownloadFilter.cpp
    common\eCosTestDownloadFilter.h
    common\eCosTestMonitorFilter.cpp
    common\eCosTestMonitorFilter.h
    common\eCosTestSerialFilter.cpp
    common\eCosTestSerialFilter.h
    common\eCosTestServer.cpp
    common\eCosTestUtils.cpp
    common\eCosTestUtils.h
    common\resetall.cpp
    common\rgdb.cpp
    common\ser_filter.cpp
    common\stat.cpp
    common\summlog.cpp
    common\x10reset.cpp
    unix\Makefile
    win32\eCosTest.dsp
    win32\Amplicon\AmpliconD.cpp

  General tidy-up.

2000-04-10  Bart Veer  <[e-mail]>

	* common/permtest.cxx (main):
	Add diagnostics callbacks to database initialization.

2000-03-20  John Dallaway  <[e-mail]>

	* win32/eCosTest.dsp:

	Add common/eCosTestMonitorFilter.h and
	common/eCosTestMonitorFilter.cpp to the project.

2000-03-16  Jesper Skov  <[e-mail]>

	* common/eCosTestMonitorFilter.h:
	* common/eCosTestMonitorFilter.cpp:
	* common/ser_filter.cpp:
	* unix/Makefile (common_sources): 
	Added monitor filter and new -m option to ser_filter. This allows
	simple monitoring of the traffic between host and target.

2000-03-15  John Dallaway  <[e-mail]>

	* common/eCosTest.cpp:

	Modify RunGdb() to sleep 500ms if there is no message.

2000-03-13 Simon FitzMaurice <[e-mail]>
  * common\ResourceServer.cpp
    common\TestResource.cpp
    common\eCosTest.cpp
    common\eCosTestClient.cpp
    common\eCosTestSerial.cpp
    common\eCosTestSerial.h
    common\eCosTestSocket.cpp
    common\eCosTestSocket.h
    common\eCosTestUtils.cpp
    common\randfile.cpp
    common\rgdb.cpp
    common\ser_filter.cpp

	Mark UNIX sections of code as such.
	Correct behavior of eCosTestClient when give directory as argument.
	A couple of allocations -> stack for simplicity.

2000-03-10 Simon FitzMaurice <[e-mail]>
  * common\ResetAttributes.cpp
    common\ResourceServer.cpp
    common\X10.cpp
    common\TestResource.cpp
    common\TestResource.h
    common\X10d.cpp
    common\eCosTest.cpp
    common\eCosTest.h
    common\eCosTestDownloadFilter.cpp
    common\eCosTestSerial.cpp
    common\eCosTestServer.cpp
    common\eCosTestSocket.cpp
    common\rgdb.cpp
    common\ser_filter.cpp
    common\x10reset.cpp
    unix\Makefile
    win32\eCosTest.dsp
    win32\Amplicon\AmpliconD.cpp
		
	Move CeCosTrace class to its own file
	Increase Time type to 64 bits to avoid signedness problems
  Remove priority latch functionality

  * common\eCosTestUtils.cpp
    common\eCosTestUtils.h

  Make CommandLine() UNICODE-compliant


  * common\summlog.cpp

	Remove hack designed to cater for incorrectly terminated output lines

  * win32\SingleCPU.cpp

	Provide ability to run on named processor

  * common\eCosTestClient.cpp

	Improve recognition of non-executable files on UNIX

2000-03-09 Simon FitzMaurice <[e-mail]>
  * win32\SingleCPU.cpp

  Avoid a performance problem with bash which, when left to its own devices, is slow on multi-processor machines.

2000-03-09  John Dallaway  <[e-mail]>

	* common/eCosTest.cpp,
	  common/eCosTest.h:

	Use 'REMOTE_SIM' as the platform type identifier for
	remote simulators.

2000-03-09  Bart Veer  <[e-mail]>

	* common/permtest.cxx (main):
	Add an explicit call to resolve_all_conflicts(), although I am not
	yet sure under what circumstances this would be necessary.

2000-03-08 Simon FitzMaurice <[e-mail]>
  * common\eCosTestClient.cpp

  Correct logic error - - allow multiple threads only when non-local

2000-03-08  Bart Veer  <[e-mail]>

	* common/configure.in (cyg_ac_infra_libdir):
	Fix typo detected by Solaris build


2000-03-08 Simon FitzMaurice <[e-mail]>
  * common\summlog.cpp

  Eliminate compiler warnings on UNIX.

2000-03-08 Simon FitzMaurice <[e-mail]>
  * common\eCosTestClient.cpp

	Prevent locally running clients loading from resource server.

2000-03-08 Simon FitzMaurice <[e-mail]>
  * common\eCosTest.cpp
    common\summlog.cpp

  Ensure that gdb output is terminated by a newline and that summlog initializes target list correctly.

2000-03-08 Simon FitzMaurice <[e-mail]>
  * common\ResetAttributes.cpp
    common\X10d.cpp
    common\eCosTest.cpp
    common\eCosTestClient.cpp
    win32\Amplicon\AmpliconD.cpp

  Add name argument to RunThread calls for debugging.
	Do not allow wait for SuckTheadfunc in reset to time out - thread already has a timeout

  * win32\eCosTest.dsw : 	Adapt to new location of cdl.dsp
  * common\summlog.cpp : ensure eCosTest::Init() and Term() are called


2000-03-08 Simon FitzMaurice <[e-mail]>
  * common\ResetAttributes.cpp
    common\ResourceServer.cpp
    common\X10d.cpp
    common\eCosTest.cpp
    common\eCosTest.h
    common\eCosTestClient.cpp
    common\eCosTestServer.cpp
    common\eCosTestUtils.cpp
    common\eCosTestUtils.h
    common\resetall.cpp
    common\rgdb.cpp
    common\ser_filter.cpp
    common\stat.cpp
    common\summlog.cpp
    common\x10reset.cpp
    win32\Amplicon\AmpliconD.cpp

	Eliminate GarbageCollector class in favor of CeCosTest::Init() and CeCosTest::Term()
	Fix UNICODE problems in eCosTestUtils

2000-03-08  Bart Veer  <[e-mail]>

	* common/permtest.cxx (process_startup):
	Look for CYGHWR_HAL_STARTUP as well as CYG_HAL_STARTUP

2000-03-08  John Dallaway  <[e-mail]>

	* win32/eCosTest.dsw:

	Use relocated cdl project file.

2000-03-07  Bart Veer  <[e-mail]>

	* common/permtest.cxx (process_startup):
	If a target does not have a CYG_HAL_STARTUP option, ignore any
	attempts to set the startup.

2000-03-07 Simon FitzMaurice <[e-mail]>
  * common\ResetAttributes.cpp
    common\ResetAttributes.h
    common\ResourceServer.cpp
    common\TestResource.cpp
    common\TestResource.h
    common\X10.cpp
    common\X10d.cpp
    common\eCosTest.cpp
    common\eCosTest.h
    common\eCosTestClient.cpp
    common\eCosTestDownloadFilter.cpp
    common\eCosTestDownloadFilter.h
    common\eCosTestSerial.cpp
    common\eCosTestSerial.h
    common\eCosTestSerialFilter.cpp
    common\eCosTestSerialFilter.h
    common\eCosTestServer.cpp
    common\eCosTestSocket.cpp
    common\eCosTestSocket.h
    common\eCosTestUtils.cpp
    common\eCosTestUtils.h
    common\resetall.cpp
    common\rgdb.cpp
    common\ser_filter.cpp
    common\stat.cpp
    common\summlog.cpp
    common\x10reset.cpp
    win32\eCosTest.dsw
    win32\Amplicon\AmpliconD.cpp

	Use std::vector directly instead of StringArray, PtrArray
	Introduce common command-line processing to CeCosTestUtils
	Tidy output and trace functions and move to CeCosTrace

2000-03-03 Simon FitzMaurice <[e-mail]>
  * common\TestResource.h
    common\eCosTest.cpp
    common\eCosTest.h

  Adjust for UNIX compiler requirements.

2000-03-03 Simon FitzMaurice <[e-mail]>
  * common\ResetAttributes.cpp
    common\TestResource.cpp
    common\X10d.cpp
    common\eCosTest.cpp
    common\eCosTest.h
    common\eCosTestClient.cpp
    common\eCosTestUtils.cpp
    common\eCosTestUtils.h
    unix\Makefile
    win32\eCosTest.dsp
    win32\Amplicon\AmpliconD.cpp

  Thread-related code extracted to new class CeCosThreadUtils

2000-03-03 Simon FitzMaurice <[e-mail]>
  * common\TestResource.cpp
    common\TestResource.h
    common\eCosTest.cpp

  Eliminate memory leaks.
  Allow resources to be properly reused for benefit of Resource Tool.

2000-03-02 Simon FitzMaurice <[e-mail]>
  * common\ResetAttributes.cpp
    common\ResetAttributes.h
    common\ResourceServer.cpp
    common\TestResource.cpp
    common\TestResource.h
    common\X10.cpp
    common\X10d.cpp
    common\eCosTest.cpp
    common\eCosTest.h
    common\eCosTestClient.cpp
    common\eCosTestDownloadFilter.cpp
    common\eCosTestDownloadFilter.h
    common\eCosTestSerial.cpp
    common\eCosTestSerial.h
    common\eCosTestSerialFilter.cpp
    common\eCosTestSerialFilter.h
    common\eCosTestServer.cpp
    common\eCosTestSocket.cpp
    common\eCosTestSocket.h
    common\eCosTestUtils.cpp
    common\eCosTestUtils.h
    common\resetall.cpp
    common\rgdb.cpp
    common\ser_filter.cpp
    common\stat.cpp
    common\stdafx.cpp
    common\stop.cpp
    common\summlog.cpp
    common\x10reset.cpp
    unix\Makefile
    win32\eCosTest.dsp
    win32\Amplicon\AmpliconD.cpp

  Introduce flexible reset scheme.
  Migrate more classes to Utils from eCosTest.
  Introduce collections.h for String, StringArray etc...
  Use common CSubprocess class implementation.

2000-02-29 Simon FitzMaurice <[e-mail]>
  * common\ResetAttributes.cpp : Ensure it compiles on unix

2000-02-29 Simon FitzMaurice <[e-mail]>
  * common\ResetAttributes.cpp : correct typo
  * win32\eCosTest.dsw : add testtool
        
2000-02-29 Simon FitzMaurice <[e-mail]>
  * common\ResetAttributes.cpp
    common\ResetAttributes.h
    common\ResourceServer.cpp
    common\TestResource.cpp
    common\TestResource.h
    common\X10d.cpp
    common\eCosTest.cpp
    common\eCosTest.h
    common\eCosTestClient.cpp
    common\eCosTestSerial.cpp
    common\eCosTestSerial.h
    common\eCosTestSerialFilter.cpp
    common\eCosTestServer.cpp
    common\eCosTestSocket.cpp
    common\eCosTestSocket.h
    common\eCosTestStd.h
    common\eCosTestUtils.cpp
    common\eCosTestUtils.h
    common\resetall.cpp
    common\rgdb.cpp
    common\stat.cpp
    common\summlog.cpp
    common\wcharunix.h
    common\x10reset.cpp
    win32\subprocess.cpp
    win32\subprocess.h
    win32\Amplicon\AmpliconD.cpp

  Change to flexible reset scheme.
  CeCosTestUtils::String -> String, CeCosTestUtils::StringArray -> StringArray

2000-02-28  John Dallaway  <[e-mail]>

	* common\eCosTest.cpp:

	Modify LocalThreadFunc() to call the sa2sim-run script
	for COYSIM executables.

2000-02-25 Simon FitzMaurice <[e-mail]>
  * common\ResetAttributes.cpp
    common\ResetAttributes.h
    common\ResourceServer.cpp
    common\TestResource.cpp
    common\x10reset.cpp

  Use ResetAttributes properties to serialize TestResource.

2000-02-25 Simon FitzMaurice <[e-mail]>
  * common\ResetAttributes.cpp
    common\ResetAttributes.h
    common\TestResource.cpp
    common\X10.cpp
    common\X10d.cpp
    common\eCosTestClient.cpp
    common\eCosTestServer.cpp
    common\x10reset.cpp
    win32\Amplicon\AmpliconD.cpp