📄 secondccc
字号:
lamp_state[j]=4; /*灯组是行人灯组，在黄灯期间置红色*/
}
if(now_phase_tempn!=0)
lamp_state[j]=1; /*下一阶段用的灯组仍置成绿色*/
}
}
}
else if(now_uncount<=red_clear[i]) //当前倒计时处于全红时间范围内
{
if(now_phase_tempn==0)
now_phase_status = now_phase_status&(~now_phase_temp);
if((XBYTE[baseaddr_now_phasesch+18*i+2]&0x04)!=0x04)
{
now_step_uncount = now_uncount; //当前阶段的倒计时
}
for(j=0; j<16; j++)
{
toto1 = 0x0001;
toto1 = toto1<<j;
inuse_lamp_temp = toto1&now_lamp;
if(inuse_lamp_temp!=0)
{
lamp_state[j]=4; /*当前阶段用的灯组置成绿闪*/
if(now_phase_tempn!=0)
lamp_state[j]=1; /*下一阶段用的灯组仍置成绿色*/
}
}
}
}
}
}
count_step++;
now_step_key++; //如果没有强制标志
if(now_uncount==1) //一个阶段时间走完
{
if(re_control)
step_counter=reph_number-1;
else if(force_flag==1)
step_counter=force_number-1;
else
step_counter++;
//cal_clear_time();//计算个阶段的清空时间
//max_clear_time();
now_step_key = 0;
sensor_virgin_flag = 1;
/////////////////////////////////////////////////////////
period_sch[7+step_counter]=count_step; //当前阶段时间
count_step=0;
///////////////////////////////////////////////////////
if(step_counter>=step_num){ //周期结束
period_update = 1;
EA=0;
trans_volum(); //周期更迭时传送流量信息
tran_psh(); //周期更迭时传送方案信息
EA=1;
}
}
}
/*****************************************************************************************************/
// 灯输出函数
/*****************************************************************************************************/
void lamp_out() using 1
{
uchar xdata i;
uchar xdata left;
greenl=0;
greenh=0;
yell=0;
yelh=0;
redl=0;
redh=0;
for(i=0;i<8;i++)
{
left=0x01;
left=left<<i;
switch(lamp_state[i])
{
case 0x01: //绿灯
greenl=(greenl|left);
break;
case 0x02: //绿闪
if(ssecond) greenl=(greenl|left);
else greenl=(greenl&(~left));
break;
case 0x03: //黄灯
yell=(yell|left);
break;
case 0x04: //红灯
redl=(redl|left);
break;
case 0x05: //黄闪
if(ssecond) yell=(yell|left);
else yell=(yell&(~left));
break;
default:break;
}
switch(lamp_state[i+8])
{
case 0x01:
greenh=(greenh|left);
break;
case 0x02:
if(ssecond) greenh=(greenh|left);
else greenh=(greenh&(~left));
break;
case 0x03:
yelh=(yelh|left);
break;
case 0x04:
redh=(redh|left);
break;
case 0x05:
if(ssecond) yelh=(yelh|left);
else yelh=(yelh&(~left));
break;
default:break;
}
}
// XBYTE[0Xc103]=0x80;
// XBYTE[0Xc183]=0x80;
XBYTE[0Xc100]=greenl;
XBYTE[0Xc101]=yell;
XBYTE[0Xc102]=redl;
XBYTE[0Xc180]=greenh;
XBYTE[0Xc181]=yelh;
XBYTE[0Xc182]=redh;
}
/*****************************************************************************************************/
// 装载状态函数
/*****************************************************************************************************/
void make0x83()
{
led82[0] = now_day_planid; //当前计划
led82[1] = timeid; //时段
led82[2] = now_schemeid; //当前方案
led83[0] = now_step_schid/*+1*/; //当前的阶段表号
led83[1] = step_counter+1; //当前阶段
led83[4] = now_phase_status/256;
led83[5] = now_phase_status%256; //当前的相位状态
led83[9] = inuse_phasen[step_counter]/256;
led83[10] = inuse_phasen[step_counter]%256; //下一阶段的放行相位
led83[11] = now_step_uncount;//-1; //当前阶段的倒计时
led83[12] = machine_run_error; //运行故障信息
led83[13] = r_error1/256;
led83[14] = r_error1%256; /*驱而不亮的红灯组*/
led83[15] = y_error1/256;
led83[16] = y_error1%256; /*驱而不亮的黄灯组*/
led83[17] = g_error1/256;
led83[18] = g_error1%256; /*驱而不亮的绿灯组*/
led83[19] = r_error2/256;
led83[20] = r_error2%256; /*不驱而亮的红灯组*/
led83[21] = y_error2/256;
led83[22] = y_error2%256; /*不驱而亮的黄灯组*/
led83[23] = g_error2/256;
led83[24] = g_error2%256; /*不驱而亮的绿灯组*/
led83[25] = hpp/256;
led83[26] = hpp%256;
led83[27] = lpp/256;
led83[28] = lpp%256; //线圈故障信息
}
/*-----------------------强制-------------*/
hand_control() using 1
{
unsigned char data kkk=0;
unsigned int toto;
temp=XBYTE[0X6d28]; //手动强制标志 ///////////////////////////////////////////////
force_number=XBYTE[0x6d29]; //强制的阶段号
if(temp==1)
{
if(force_number>step_num)
{
//不再阶段范围内，解除
force_flag=0;
if(force_state!=4&&force_state!=0)
force_state=3;
}
else
{
force_flag=1;
if(force_state!=2&&force_state!=4)
force_state=1;
}
}
if(temp==2){ /*黄闪*/
force_state=5;
for(kkk=0;kkk<16;kkk++){
toto = 0x0001;
toto = toto<<kkk;
if((use_lamp&toto)==toto)
lamp_state[kkk]=4; /*使用的灯组置成黄闪先*/
else
lamp_state[kkk]=7;
}
}
else if(temp==3){ /*全红*/
force_state=5;
for(kkk=0;kkk<16;kkk++){
toto = 0x0001;
toto = toto<<kkk;
if((use_lamp&toto)==toto)
lamp_state[kkk]=5; /*使用的灯组置成红色先*/
else
lamp_state[kkk]=7;
}
}
else if(temp==4){ /*解除*/
//re_control=0;
force_flag=0;
//if(remote_state!=4&&remote_state!=0)
if(force_state==2)
force_state=3;
//remote_state=1:按下遥控按键
//remote_state=2:按下遥控按键后，尚未执行遥控相位，继续走本阶段时间
//remote_state=3:按下遥控解除按键
//remote_state=4:按下遥控解除按键，继续走完遥控阶段时间
if(force_state==5)
{
period_update = 1;
step_counter=1;
force_state=0;
}
}
}
/*****************************************************************************************************/
// 半秒中断
/*****************************************************************************************************/
void secondint() interrupt 2 using 1
{
uchar i;
i = D12887C;
FarContrlLed = !FarContrlLed;
//WatchDog = !WatchDog;
ssecond = !ssecond;
if(ssecond)
{ // trans_volum();
// if(XBYTE[A031]>
//force_flag=XBYTE[0X6d28]; /*读取强制标志*/
tran_count++; /*发送测试包的计数器*/
start_counter++;
if(start_counter>20) start_counter=20;
if(start_counter<=3) /*开机黄闪*/
{
for(i=0;i<16;i++)
{
lamp_state[i]=5;
}
}
else if((start_counter>3) && (start_counter<6)) /*开机全红*/
{
for(i=0;i<16;i++)
{
lamp_state[i]=4;
}
}
else if(start_counter==6)
period_update=1; /*开机黄闪全红后，更改周期更迭标志*/
else if(start_counter>=7)
{
// if(re_control!=1)
max_clear_time();
search_color(); // key++;
make0x83();
}
}
//强制解除操作
hand_control(); //手动控制
if((now_schemeid==0x21)&&(start_counter>=3)){
for(i=0;i<16;i++)
{
lamp_state[i]=5;
}
}
remote_ph();
re_ye_allred();
lamp_out();
IP=0X10;
}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -