da020408.bak

Danfoss Profibus GSD 文件最新版本

;************************************************************************************************
;* GSD-File for:	Danfoss Drives A/S																						*
;*							FCM 300 Series 12 Mb DPV0																			*
;*																																				*
;* File name:		da020408																										*
;*               																													*
;* Contact:			Danfoss Drives A/S																						*
;*							DK 6300 Graasten																							*
;*							Denmark																											*
;*							Hotline: Int. + 45 74 88 61 00																	*
;*							E-mail: [e-mail]															*
;*																																				*
;* Revision:		da020408 Rev. 2.00 DPV0 file																		*
;*							da020408 Rev. 2.10 DPV0 file Modular station attribute added (date 03.03.12)	*
;************************************************************************************************
#Profibus_DP
GSD_Revision = 3;
Vendor_Name = "DANFOSS DRIVES A/S";
Model_name = "FCM 300 12MB";
Revision = "Rev. 2.10";
Ident_Number = 0x0408;
Protocol_Ident = 0;
Station_type = 0;
FMS_supp = 0;
Hardware_Release = "4.01";
Software_Release = "1.16";
Bitmap_Device = "FCM300";
Slave_Family = 1@Danfoss@FCM300@DPV0;
Info_Text = "FCM 300 PROFIBUS DPV0";
9.6_supp = 1;
19.2_supp = 1;
93.75_supp = 1;
187.5_supp = 1;
500_supp = 1;
1.5M_supp = 1;
3M_supp = 1;
6M_supp = 1;
12M_supp = 1;
MaxTsdr_9.6 = 60;
MaxTsdr_19.2 = 60;
MaxTsdr_93.75 = 60;
MaxTsdr_187.5 = 60;
MaxTsdr_500 = 100;
MaxTsdr_1.5M = 150;
MaxTsdr_3M = 250;
MaxTsdr_6M = 450;
MaxTsdr_12M = 800;
Redundancy = 0;
24V_Pins = 0;
Freeze_Mode_supp = 1;
Sync_Mode_supp = 1;
Auto_Baud_supp = 1;
Set_Slave_add_supp = 1;
Min_Slave_Intervall = 06;
Modular_Station = 1;
Max_Module = 1;
Max_Input_Len = 28;
Max_Output_Len = 28;
Max_Data_Len = 56;
Max_Diag_Data_Len = 6;
Module = "PPO Typ 1 Module consistent PCD" 0xF3, 0xF1;
1
EndModule;
Module = "PPO Typ 1 Word consistent PCD  " 0xF3, 0x71;
2
EndModule;
Module = "PPO Typ 2 Module consistent PCD" 0xF3, 0xF5;
3
EndModule;
Module = "PPO Typ 2 Word consistent PCD  " 0xF3, 0x75;
4
EndModule;
Module = "PPO Typ 3 Module consistent PCD" 0xF1;
5
EndModule;
Module = "PPO Typ 3 Word consistent PCD  " 0x71;
6
EndModule;
Module = "PPO Typ 4 Module consistent PCD" 0xF5;
7
EndModule;
Module = "PPO Typ 4 Word consistent PCD  " 0x75;
8
EndModule;
Module = "PPO Typ 5 Module consistent PCD" 0xF3, 0xF9;
9
EndModule;
Module = "PPO Typ 5 Word consistent PCD  " 0xF3, 0x79;
10
EndModule;