or1200_defines.v

本人制作的8位CPU,有简单的加减,输入,输出操作,希望大家好用

//

//
// System registers
//
`define OR1200_SPR_CFGR		7'd0
`define OR1200_SPR_RF		6'd32	// 1024 >> 5
`define OR1200_SPR_NPC		11'd16
`define OR1200_SPR_SR		11'd17
`define OR1200_SPR_PPC		11'd18
`define OR1200_SPR_EPCR		11'd32
`define OR1200_SPR_EEAR		11'd48
`define OR1200_SPR_ESR		11'd64

//
// SR bits
//
`define OR1200_SR_WIDTH 16
`define OR1200_SR_SM   0
`define OR1200_SR_TEE  1
`define OR1200_SR_IEE  2
`define OR1200_SR_DCE  3
`define OR1200_SR_ICE  4
`define OR1200_SR_DME  5
`define OR1200_SR_IME  6
`define OR1200_SR_LEE  7
`define OR1200_SR_CE   8
`define OR1200_SR_F    9
`define OR1200_SR_CY   10	// Unused
`define OR1200_SR_OV   11	// Unused
`define OR1200_SR_OVE  12	// Unused
`define OR1200_SR_DSX  13	// Unused
`define OR1200_SR_EPH  14
`define OR1200_SR_FO   15
`define OR1200_SR_CID  31:28	// Unimplemented

//
// Bits that define offset inside the group
//
`define OR1200_SPROFS_BITS 10:0

//
// Default Exception Prefix
//
// 1'b0 - OR1200_EXCEPT_EPH0_P (0x0000_0000)
// 1'b1 - OR1200_EXCEPT_EPH1_P (0xF000_0000)
//
`define OR1200_SR_EPH_DEF	1'b0

/////////////////////////////////////////////////////
//
// Power Management (PM)
//

// Define it if you want PM implemented
`define OR1200_PM_IMPLEMENTED

// Bit positions inside PMR (don't change)
`define OR1200_PM_PMR_SDF 3:0
`define OR1200_PM_PMR_DME 4
`define OR1200_PM_PMR_SME 5
`define OR1200_PM_PMR_DCGE 6
`define OR1200_PM_PMR_UNUSED 31:7

// PMR offset inside PM group of registers
`define OR1200_PM_OFS_PMR 11'b0

// PM group
`define OR1200_SPRGRP_PM 5'd8

// Define if PMR can be read/written at any address inside PM group
`define OR1200_PM_PARTIAL_DECODING

// Define if reading PMR is allowed
`define OR1200_PM_READREGS

// Define if unused PMR bits should be zero
`define OR1200_PM_UNUSED_ZERO


/////////////////////////////////////////////////////
//
// Debug Unit (DU)
//

// Define it if you want DU implemented
`define OR1200_DU_IMPLEMENTED

//
// Define if you want HW Breakpoints
// (if HW breakpoints are not implemented
// only default software trapping is
// possible with l.trap insn - this is
// however already enough for use
// with or32 gdb)
//
//`define OR1200_DU_HWBKPTS

// Number of DVR/DCR pairs if HW breakpoints enabled
`define OR1200_DU_DVRDCR_PAIRS 8

// Define if you want trace buffer
//`define OR1200_DU_TB_IMPLEMENTED

//
// Address offsets of DU registers inside DU group
//
// To not implement a register, doq not define its address
//
`ifdef OR1200_DU_HWBKPTS
`define OR1200_DU_DVR0		11'd0
`define OR1200_DU_DVR1		11'd1
`define OR1200_DU_DVR2		11'd2
`define OR1200_DU_DVR3		11'd3
`define OR1200_DU_DVR4		11'd4
`define OR1200_DU_DVR5		11'd5
`define OR1200_DU_DVR6		11'd6
`define OR1200_DU_DVR7		11'd7
`define OR1200_DU_DCR0		11'd8
`define OR1200_DU_DCR1		11'd9
`define OR1200_DU_DCR2		11'd10
`define OR1200_DU_DCR3		11'd11
`define OR1200_DU_DCR4		11'd12
`define OR1200_DU_DCR5		11'd13
`define OR1200_DU_DCR6		11'd14
`define OR1200_DU_DCR7		11'd15
`endif
`define OR1200_DU_DMR1		11'd16
`ifdef OR1200_DU_HWBKPTS
`define OR1200_DU_DMR2		11'd17
`define OR1200_DU_DWCR0		11'd18
`define OR1200_DU_DWCR1		11'd19
`endif
`define OR1200_DU_DSR		11'd20
`define OR1200_DU_DRR		11'd21
`ifdef OR1200_DU_TB_IMPLEMENTED
`define OR1200_DU_TBADR		11'h0ff
`define OR1200_DU_TBIA		11'h1xx
`define OR1200_DU_TBIM		11'h2xx
`define OR1200_DU_TBAR		11'h3xx
`define OR1200_DU_TBTS		11'h4xx
`endif

// Position of offset bits inside SPR address
`define OR1200_DUOFS_BITS	10:0

// DCR bits
`define OR1200_DU_DCR_DP	0
`define OR1200_DU_DCR_CC	3:1
`define OR1200_DU_DCR_SC	4
`define OR1200_DU_DCR_CT	7:5

// DMR1 bits
`define OR1200_DU_DMR1_CW0	1:0
`define OR1200_DU_DMR1_CW1	3:2
`define OR1200_DU_DMR1_CW2	5:4
`define OR1200_DU_DMR1_CW3	7:6
`define OR1200_DU_DMR1_CW4	9:8
`define OR1200_DU_DMR1_CW5	11:10
`define OR1200_DU_DMR1_CW6	13:12
`define OR1200_DU_DMR1_CW7	15:14
`define OR1200_DU_DMR1_CW8	17:16
`define OR1200_DU_DMR1_CW9	19:18
`define OR1200_DU_DMR1_CW10	21:20
`define OR1200_DU_DMR1_ST	22
`define OR1200_DU_DMR1_BT	23
`define OR1200_DU_DMR1_DXFW	24
`define OR1200_DU_DMR1_ETE	25

// DMR2 bits
`define OR1200_DU_DMR2_WCE0	0
`define OR1200_DU_DMR2_WCE1	1
`define OR1200_DU_DMR2_AWTC	12:2
`define OR1200_DU_DMR2_WGB	23:13

// DWCR bits
`define OR1200_DU_DWCR_COUNT	15:0
`define OR1200_DU_DWCR_MATCH	31:16

// DSR bits
`define OR1200_DU_DSR_WIDTH	14
`define OR1200_DU_DSR_RSTE	0
`define OR1200_DU_DSR_BUSEE	1
`define OR1200_DU_DSR_DPFE	2
`define OR1200_DU_DSR_IPFE	3
`define OR1200_DU_DSR_TTE	4
`define OR1200_DU_DSR_AE	5
`define OR1200_DU_DSR_IIE	6
`define OR1200_DU_DSR_IE	7
`define OR1200_DU_DSR_DME	8
`define OR1200_DU_DSR_IME	9
`define OR1200_DU_DSR_RE	10
`define OR1200_DU_DSR_SCE	11
`define OR1200_DU_DSR_BE	12
`define OR1200_DU_DSR_TE	13

// DRR bits
`define OR1200_DU_DRR_RSTE	0
`define OR1200_DU_DRR_BUSEE	1
`define OR1200_DU_DRR_DPFE	2
`define OR1200_DU_DRR_IPFE	3
`define OR1200_DU_DRR_TTE	4
`define OR1200_DU_DRR_AE	5
`define OR1200_DU_DRR_IIE	6
`define OR1200_DU_DRR_IE	7
`define OR1200_DU_DRR_DME	8
`define OR1200_DU_DRR_IME	9
`define OR1200_DU_DRR_RE	10
`define OR1200_DU_DRR_SCE	11
`define OR1200_DU_DRR_BE	12
`define OR1200_DU_DRR_TE	13

// Define if reading DU regs is allowed
`define OR1200_DU_READREGS

// Define if unused DU registers bits should be zero
`define OR1200_DU_UNUSED_ZERO

// Define if IF/LSU status is not needed by devel i/f
`define OR1200_DU_STATUS_UNIMPLEMENTED

/////////////////////////////////////////////////////
//
// Programmable Interrupt Controller (PIC)
//

// Define it if you want PIC implemented
`define OR1200_PIC_IMPLEMENTED

// Define number of interrupt inputs (2-31)
`define OR1200_PIC_INTS 20

// Address offsets of PIC registers inside PIC group
`define OR1200_PIC_OFS_PICMR 2'd0
`define OR1200_PIC_OFS_PICSR 2'd2

// Position of offset bits inside SPR address
`define OR1200_PICOFS_BITS 1:0

// Define if you want these PIC registers to be implemented
`define OR1200_PIC_PICMR
`define OR1200_PIC_PICSR

// Define if reading PIC registers is allowed
`define OR1200_PIC_READREGS

// Define if unused PIC register bits should be zero
`define OR1200_PIC_UNUSED_ZERO


/////////////////////////////////////////////////////
//
// Tick Timer (TT)
//

// Define it if you want TT implemented
`define OR1200_TT_IMPLEMENTED

// Address offsets of TT registers inside TT group
`define OR1200_TT_OFS_TTMR 1'd0
`define OR1200_TT_OFS_TTCR 1'd1

// Position of offset bits inside SPR group
`define OR1200_TTOFS_BITS 0

// Define if you want these TT registers to be implemented
`define OR1200_TT_TTMR
`define OR1200_TT_TTCR

// TTMR bits
`define OR1200_TT_TTMR_TP 27:0
`define OR1200_TT_TTMR_IP 28
`define OR1200_TT_TTMR_IE 29
`define OR1200_TT_TTMR_M 31:30

// Define if reading TT registers is allowed
`define OR1200_TT_READREGS


//////////////////////////////////////////////
//
// MAC
//
`define OR1200_MAC_ADDR		0	// MACLO 0xxxxxxxx1, MACHI 0xxxxxxxx0
`define OR1200_MAC_SPR_WE		// Define if MACLO/MACHI are SPR writable

//
// Shift {MACHI,MACLO} into destination register when executing l.macrc
//
// According to architecture manual there is no shift, so default value is 0.
//
// However the implementation has deviated in this from the arch manual and had hard coded shift by 28 bits which
// is a useful optimization for MP3 decoding (if using libmad fixed point library). Shifts are no longer
// default setup, but if you need to remain backward compatible, define your shift bits, which were normally
// dest_GPR = {MACHI,MACLO}[59:28]
`define OR1200_MAC_SHIFTBY	0	// 0 = According to arch manual, 28 = obsolete backward compatibility


//////////////////////////////////////////////
//
// Data MMU (DMMU)
//

//
// Address that selects between TLB TR and MR
//
`define OR1200_DTLB_TM_ADDR	7

//
// DTLBMR fields
//
`define	OR1200_DTLBMR_V_BITS	0
`define	OR1200_DTLBMR_CID_BITS	4:1
`define	OR1200_DTLBMR_RES_BITS	11:5
`define OR1200_DTLBMR_VPN_BITS	31:13

//
// DTLBTR fields
//
`define	OR1200_DTLBTR_CC_BITS	0
`define	OR1200_DTLBTR_CI_BITS	1
`define	OR1200_DTLBTR_WBC_BITS	2
`define	OR1200_DTLBTR_WOM_BITS	3
`define	OR1200_DTLBTR_A_BITS	4
`define	OR1200_DTLBTR_D_BITS	5
`define	OR1200_DTLBTR_URE_BITS	6
`define	OR1200_DTLBTR_UWE_BITS	7
`define	OR1200_DTLBTR_SRE_BITS	8
`define	OR1200_DTLBTR_SWE_BITS	9
`define	OR1200_DTLBTR_RES_BITS	11:10
`define OR1200_DTLBTR_PPN_BITS	31:13

//
// DTLB configuration
//
`define	OR1200_DMMU_PS		13					// 13 for 8KB page size
`define	OR1200_DTLB_INDXW	6					// 6 for 64 entry DTLB	7 for 128 entries
`define OR1200_DTLB_INDXL	`OR1200_DMMU_PS				// 13			13
`define OR1200_DTLB_INDXH	`OR1200_DMMU_PS+`OR1200_DTLB_INDXW-1	// 18			19
`define	OR1200_DTLB_INDX	`OR1200_DTLB_INDXH:`OR1200_DTLB_INDXL	// 18:13		19:13
`define OR1200_DTLB_TAGW	32-`OR1200_DTLB_INDXW-`OR1200_DMMU_PS	// 13			12
`define OR1200_DTLB_TAGL	`OR1200_DTLB_INDXH+1			// 19			20
`define	OR1200_DTLB_TAG		31:`OR1200_DTLB_TAGL			// 31:19		31:20
`define	OR1200_DTLBMRW		`OR1200_DTLB_TAGW+1			// +1 because of V bit
`define	OR1200_DTLBTRW		32-`OR1200_DMMU_PS+5			// +5 because of protection bits and CI

//
// Cache inhibit while DMMU is not enabled/implemented
//
// cache inhibited 0GB-4GB		1'b1
// cache inhibited 0GB-2GB		!dcpu_adr_i[31]
// cache inhibited 0GB-1GB 2GB-3GB	!dcpu_adr_i[30]
// cache inhibited 1GB-2GB 3GB-4GB	dcpu_adr_i[30]
// cache inhibited 2GB-4GB (default)	dcpu_adr_i[31]
// cached 0GB-4GB			1'b0
//
`define OR1200_DMMU_CI			dcpu_adr_i[31]


//////////////////////////////////////////////
//
// Insn MMU (IMMU)
//

//
// Address that selects between TLB TR and MR
//
`define OR1200_ITLB_TM_ADDR	7

//
// ITLBMR fields
//
`define	OR1200_ITLBMR_V_BITS	0
`define	OR1200_ITLBMR_CID_BITS	4:1
`define	OR1200_ITLBMR_RES_BITS	11:5
`define OR1200_ITLBMR_VPN_BITS	31:13

//
// ITLBTR fields
//
`define	OR1200_ITLBTR_CC_BITS	0
`define	OR1200_ITLBTR_CI_BITS	1
`define	OR1200_ITLBTR_WBC_BITS	2
`define	OR1200_ITLBTR_WOM_BITS	3
`define	OR1200_ITLBTR_A_BITS	4
`define	OR1200_ITLBTR_D_BITS	5
`define	OR1200_ITLBTR_SXE_BITS	6
`define	OR1200_ITLBTR_UXE_BITS	7
`define	OR1200_ITLBTR_RES_BITS	11:8
`define OR1200_ITLBTR_PPN_BITS	31:13

//
// ITLB configuration
//
`define	OR1200_IMMU_PS		13					// 13 for 8KB page size
`define	OR1200_ITLB_INDXW	6					// 6 for 64 entry ITLB	7 for 128 entries
`define OR1200_ITLB_INDXL	`OR1200_IMMU_PS				// 13			13
`define OR1200_ITLB_INDXH	`OR1200_IMMU_PS+`OR1200_ITLB_INDXW-1	// 18			19
`define	OR1200_ITLB_INDX	`OR1200_ITLB_INDXH:`OR1200_ITLB_INDXL	// 18:13		19:13
`define OR1200_ITLB_TAGW	32-`OR1200_ITLB_INDXW-`OR1200_IMMU_PS	// 13			12
`define OR1200_ITLB_TAGL	`OR1200_ITLB_INDXH+1			// 19			20
`define	OR1200_ITLB_TAG		31:`OR1200_ITLB_TAGL			// 31:19		31:20
`define	OR1200_ITLBMRW		`OR1200_ITLB_TAGW+1			// +1 because of V bit
`define	OR1200_ITLBTRW		32-`OR1200_IMMU_PS+3			// +3 because of protection bits and CI

//
// Cache inhibit while IMMU is not enabled/implemented
// Note: all combinations that use icpu_adr_i cause async loop
//
// cache inhibited 0GB-4GB		1'b1
// cache inhibited 0GB-2GB		!icpu_adr_i[31]
// cache inhibited 0GB-1GB 2GB-3GB	!icpu_adr_i[30]
// cache inhibited 1GB-2GB 3GB-4GB	icpu_adr_i[30]
// cache inhibited 2GB-4GB (default)	icpu_adr_i[31]
// cached 0GB-4GB			1'b0
//
`define OR1200_IMMU_CI			1'b0


/////////////////////////////////////////////////
//
// Insn cache (IC)
//

// 3 for 8 bytes, 4 for 16 bytes etc
`define OR1200_ICLS		4

//
// IC configurations
//
`ifdef OR1200_IC_1W_512B
`define OR1200_ICSIZE   9     // 512
`define OR1200_ICINDX   `OR1200_ICSIZE-2 // 7
`define OR1200_ICINDXH  `OR1200_ICSIZE-1 // 8
`define OR1200_ICTAGL   `OR1200_ICINDXH+1 // 9
`define OR1200_ICTAG    `OR1200_ICSIZE-`OR1200_ICLS // 5
`define OR1200_ICTAG_W  24
`endif
`ifdef OR1200_IC_1W_4KB
`define OR1200_ICSIZE			12			// 4096