readme.txt

周立功ARM Stellaris驱动库源程序

UART

This example application utilizes the UART to display text.  The first UART
(connected to the FTDI virtual serial port on the Stellaris LM3S811 Evaluation
Board) will be configured in 115,200 baud, 8-n-1 mode and continuously display
text.  The text is transferred by servicing the interrupt from the UART; since
it takes about 1ms to drain half of the UART FIFO (causing an interrupt), this
leaves plenty of time for other processing to occur during the transfer (though
that time is not utilized by this example).

-------------------------------------------------------------------------------

Copyright (c) 2005,2006 Luminary Micro, Inc.  All rights reserved.

Software License Agreement

Luminary Micro, Inc. (LMI) is supplying this software for use solely and
exclusively on LMI's Stellaris Family of microcontroller products.

The software is owned by LMI and/or its suppliers, and is protected under
applicable copyright laws.  All rights are reserved.  Any use in violation of
the foregoing restrictions may subject the user to criminal sanctions under
applicable laws, as well as to civil liability for the breach of the terms and
conditions of this license.

THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.  LMI SHALL NOT, IN
ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
FOR ANY REASON WHATSOEVER.

This is part of revision 920 of the Stellaris Driver Library.