def.h

T112 MCU源程码,用于T112外接MCU篇程,用来驱动模拟屏

#if !defined(__DEF_H__)
#define __DEF_H__

#define   	uchar  						unsigned char    	
#define   	uint   						unsigned int 
#define		uWORD						unsigned short


#define 	OSD_LINE_NUM				10

#define 	FONT_DATA_START_ADDRESS		0x0000
#define 	MENU_RAM_START_ADDRESS		((TOTAL_FONT_NUM*FONT_HEIGHT)/32+1)*32		///font+Char A/INDEX(31)=ROW_addrr
#define 	CHAR_MAIN_MENU_START		((MENU_RAM_START_ADDRESS>>4)&0x7F)
#define 	TOTAL_FONT_NUM				39
#define 	OSD_CTRL         			0x00
#define 	CHAR_DLY_0       			0x01
#define 	CHAR_DLY_1       			0x02
#define 	CHAR_DLY_2       			0x03
#define 	ALPHA_BLD_CTRL    			0x04
#define 	CHAR_RAM_BASE_A  			0x05
#define 	CHAR_RAM_END_A     			0x06
#define 	BLINK_CTRL       			0x09
#define 	BW_WH_UPPER      			0x0a
#define 	BW_W             			0x0b
#define 	BW_H             			0x0c
#define	 	CHAR_FONT_SIZE     			0x0d
#define 	OSD_LUT_RAM_DATA 			0x0e
#define		FONT_SIZE12W18H				0x96
#define		FONT_SIZE					FONT_SIZE12W18H
#define 	CHAR_RAM_END             	CHAR_MAIN_MENU_START+0x0a
#define		FONT_HEIGHT					18
#define 	IndexNumOffset				0x2a//0x1c//0x2F
#define 	IndexCharacterOffset		0x31//0x23//0x36
#define 	BLANK 						0x3A

#define 	CENTER						1
#define 	LEFT_BOTTOM					2
#define 	TOP							3
#define 	RIGHT_TOP					4
#define		COL_GAUGE					0x4f

#define 	VOL_max						30
#define 	key_data 					P2//P1
#define 	adjust_max	 				60


#define		V31							0xc0			///3.1V	

sbit		AV1							= P2^2;
sbit		AV2							= P2^3;
sbit		AV3							= P2^1;
sbit		AV4							= P2^0;
sbit		G_Power						= P2^4;
sbit		T_Power						= P2^5;


#endif