📄 refclock_palisade.h
字号:
/* * This software was developed by the Software and Component Technologies * group of Trimble Navigation, Ltd. * * Copyright (c) 1997, 1998, 1999, 2000 Trimble Navigation Ltd. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Trimble Navigation, Ltd. * 4. The name of Trimble Navigation Ltd. may not be used to endorse or * promote products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY TRIMBLE NAVIGATION LTD. ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL TRIMBLE NAVIGATION LTD. BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. *//* * refclock_palisade - clock driver for the Trimble Palisade GPS * timing receiver * * For detailed information on this program, please refer to the html * Refclock 29 page accompanying the NTP distribution. * * for questions / bugs / comments, contact: * sven_dietrich@trimble.com * * Sven-Thorsten Dietrich * 645 North Mary Avenue * Post Office Box 3642 * Sunnyvale, CA 94088-3642 * */#ifndef _REFCLOCK_PALISADE_H#define _REFCLOCK_PALISADE_H#ifdef HAVE_CONFIG_H#include "config.h"#endif#if defined HAVE_SYS_MODEM_H#include <sys/modem.h>#ifndef __QNXNTO__#define TIOCMSET MCSETA#define TIOCMGET MCGETA#define TIOCM_RTS MRTS#endif#endif#ifdef HAVE_TERMIOS_H# ifdef TERMIOS_NEEDS__SVID3# define _SVID3# endif# include <termios.h># ifdef TERMIOS_NEEDS__SVID3# undef _SVID3# endif#endif#ifdef HAVE_SYS_IOCTL_H#include <sys/ioctl.h>#endif#include "ntpd.h"#include "ntp_io.h"#include "ntp_control.h"#include "ntp_refclock.h"#include "ntp_unixtime.h"#include "ntp_stdlib.h"/* * GPS Definitions */#define DESCRIPTION "Trimble Palisade GPS" /* Long name */#define PRECISION (-20) /* precision assumed (about 1 us) */#define REFID "GPS\0" /* reference ID */#define TRMB_MINPOLL 4 /* 16 seconds */#define TRMB_MAXPOLL 5 /* 32 seconds *//* * I/O Definitions */#define DEVICE "/dev/palisade%d" /* device name and unit */#define SPEED232 B9600 /* uart speed (9600 baud) *//* * TSIP Report Definitions */#define LENCODE_8F0B 74 /* Length of TSIP 8F-0B Packet & header */#define LENCODE_NTP 22 /* Length of Palisade NTP Packet *//* Allowed Sub-Packet ID's */#define PACKET_8F0B 0x0B#define PACKET_NTP 0xAD#define DLE 0x10#define ETX 0x03/* parse states */#define TSIP_PARSED_EMPTY 0 #define TSIP_PARSED_FULL 1#define TSIP_PARSED_DLE_1 2#define TSIP_PARSED_DATA 3#define TSIP_PARSED_DLE_2 4/* * Leap-Insert and Leap-Delete are encoded as follows: * PALISADE_UTC_TIME set and PALISADE_LEAP_PENDING set: INSERT leap */#define PALISADE_LEAP_INPROGRESS 0x08 /* This is the leap flag */#define PALISADE_LEAP_WARNING 0x04 /* GPS Leap Warning (see ICD-200) */#define PALISADE_LEAP_PENDING 0x02 /* Leap Pending (24 hours) */#define PALISADE_UTC_TIME 0x01 /* UTC time available */#define mb(_X_) (up->rpt_buf[(_X_ + 1)]) /* shortcut for buffer access *//* Conversion Definitions */#define GPS_PI (3.1415926535898)#define R2D (180.0/GPS_PI)/* * Palisade unit control structure. */struct palisade_unit { short unit; /* NTP refclock unit number */ int polled; /* flag to detect noreplies */ char leap_status; /* leap second flag */ char rpt_status; /* TSIP Parser State */ short rpt_cnt; /* TSIP packet length so far */ char rpt_buf[BMAX]; /* packet assembly buffer */ int type; /* Clock mode type */};/* * Function prototypes */static int palisade_start P((int, struct peer *));static void palisade_shutdown P((int, struct peer *));static void palisade_receive P((struct peer *));static void palisade_poll P((int, struct peer *));static void palisade_io P((struct recvbuf *));int palisade_configure P((int, struct peer *));int TSIP_decode P((struct peer *));long HW_poll P((struct refclockproc *));float getfloat P((u_char *)); double getdbl P((u_char *));short getint P((u_char *));#endif /* PALISADE_H */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -