smartsopc_board_cyclone_1c6.ptf

sopc开发板标准NIOSII模块

      {
         allow_mram_sim_contents_only_file = "0";
         ram_block_type = "M4K";
         gui_ram_block_type = "Automatic";
         Writeable = "1";
         dual_port = "0";
         Size_Value = "1";
         Size_Multiple = "1024";
         contents_info = "QUARTUS_PROJECT_DIR/data_RAM.hex 1147854490 ";
         MAKE 
         {
            TARGET delete_placeholder_warning
            {
               data_RAM 
               {
                  Command1 = "rm -f $(SIMDIR)/contents_file_warning.txt";
                  Is_Phony = "1";
                  Target_File = "do_delete_placeholder_warning";
               }
            }
            TARGET hex
            {
               data_RAM 
               {
                  Command1 = "@echo Post-processing to create $(notdir $@)";
                  Command2 = "elf2hex $(ELF) 0x00010000 0x103FF --width=32 $(QUARTUS_PROJECT_DIR)/data_RAM.hex --create-lanes=0";
                  Dependency = "$(ELF)";
                  Target_File = "$(QUARTUS_PROJECT_DIR)/data_RAM.hex";
               }
            }
            TARGET sim
            {
               data_RAM 
               {
                  Command1 = "if [ ! -d $(SIMDIR) ]; then mkdir $(SIMDIR) ; fi";
                  Command2 = "@echo Hardware simulation is not enabled for the target SOPC Builder system. Skipping creation of hardware simulation model contents and simulation symbol files. \\(Note: This does not affect the instruction set simulator.\\)";
                  Command3 = "touch $(SIMDIR)/dummy_file";
                  Dependency = "$(ELF)";
                  Target_File = "$(SIMDIR)/dummy_file";
               }
            }
         }
      }
      SYSTEM_BUILDER_INFO 
      {
         Prohibited_Device_Family = "MERCURY, APEX20K, APEX20KE, APEX20KC, APEXII, ACEX1K, FLEX10KE, EXCALIBUR_ARM, MAXII";
         Instantiate_In_System_Module = "1";
         Is_Enabled = "1";
         Default_Module_Name = "onchip_memory";
         View 
         {
            MESSAGES 
            {
            }
            Is_Collapsed = "1";
         }
         Top_Level_Ports_Are_Enumerated = "1";
         Clock_Source = "clk";
      }
      SLAVE s1
      {
         PORT_WIRING 
         {
            PORT address
            {
               direction = "input";
               type = "address";
               width = "8";
               Is_Enabled = "1";
            }
            PORT byteenable
            {
               direction = "input";
               type = "byteenable";
               width = "4";
               Is_Enabled = "1";
            }
            PORT chipselect
            {
               direction = "input";
               type = "chipselect";
               width = "1";
               Is_Enabled = "1";
            }
            PORT clk
            {
               direction = "input";
               type = "clk";
               width = "1";
               Is_Enabled = "1";
            }
            PORT readdata
            {
               direction = "output";
               type = "readdata";
               width = "32";
               Is_Enabled = "1";
            }
            PORT write
            {
               direction = "input";
               type = "write";
               width = "1";
               Is_Enabled = "1";
            }
            PORT writedata
            {
               direction = "input";
               type = "writedata";
               width = "32";
               Is_Enabled = "1";
            }
            PORT clken
            {
               Is_Enabled = "1";
               default_value = "1'b1";
               direction = "input";
               type = "clken";
               width = "1";
            }
         }
         SYSTEM_BUILDER_INFO 
         {
            Bus_Type = "avalon";
            Is_Memory_Device = "1";
            Address_Alignment = "dynamic";
            Address_Width = "8";
            Data_Width = "32";
            Has_IRQ = "0";
            Read_Wait_States = "0";
            Write_Wait_States = "0";
            Address_Span = "1024";
            Read_Latency = "1";
            MASTERED_BY cpu_0/instruction_master
            {
               priority = "1";
            }
            MASTERED_BY cpu_0/data_master
            {
               priority = "1";
            }
            Base_Address = "0x00010000";
            IRQ_MASTER cpu_0/data_master
            {
               IRQ_Number = "NC";
            }
            Is_Base_Locked = "1";
            Is_Channel = "1";
            Is_Writable = "1";
         }
      }
      SLAVE s2
      {
         PORT_WIRING 
         {
         }
         SYSTEM_BUILDER_INFO 
         {
            Bus_Type = "avalon";
            Is_Memory_Device = "1";
            Address_Alignment = "dynamic";
            Address_Width = "8";
            Data_Width = "32";
            Has_IRQ = "0";
            Read_Wait_States = "0";
            Write_Wait_States = "0";
            Address_Span = "1024";
            Read_Latency = "1";
            Is_Enabled = "0";
            Is_Channel = "1";
            Is_Writable = "1";
         }
      }
      SIMULATION 
      {
         DISPLAY 
         {
            SIGNAL a
            {
               name = "chipselect";
               conditional = "1";
            }
            SIGNAL b
            {
               name = "write";
               conditional = "1";
            }
            SIGNAL c
            {
               name = "address";
               radix = "hexadecimal";
            }
            SIGNAL d
            {
               name = "byteenable";
               radix = "binary";
               conditional = "1";
            }
            SIGNAL e
            {
               name = "readdata";
               radix = "hexadecimal";
            }
            SIGNAL f
            {
               name = "writedata";
               radix = "hexadecimal";
               conditional = "1";
            }
         }
      }
      PORT_WIRING 
      {
      }
   }
   MODULE payload_buffer
   {
      class = "altera_avalon_onchip_memory2";
      class_version = "5.0";
      iss_model_name = "altera_memory";
      HDL_INFO 
      {
         Precompiled_Simulation_Library_Files = "";
         Simulation_HDL_Files = "";
         Synthesis_HDL_Files = "__PROJECT_DIRECTORY__/payload_buffer.v";
         Synthesis_Only_Files = "";
      }
      WIZARD_SCRIPT_ARGUMENTS 
      {
         allow_mram_sim_contents_only_file = "0";
         ram_block_type = "M4K";
         gui_ram_block_type = "Automatic";
         Writeable = "1";
         dual_port = "0";
         Size_Value = "2048";
         Size_Multiple = "1";
         contents_info = "QUARTUS_PROJECT_DIR/payload_buffer.hex 1147854492 ";
         MAKE 
         {
            TARGET delete_placeholder_warning
            {
               payload_buffer 
               {
                  Command1 = "rm -f $(SIMDIR)/contents_file_warning.txt";
                  Is_Phony = "1";
                  Target_File = "do_delete_placeholder_warning";
               }
            }
            TARGET hex
            {
               payload_buffer 
               {
                  Command1 = "@echo Post-processing to create $(notdir $@)";
                  Command2 = "elf2hex $(ELF) 0x00020000 0x207FF --width=16 $(QUARTUS_PROJECT_DIR)/payload_buffer.hex --create-lanes=0";
                  Dependency = "$(ELF)";
                  Target_File = "$(QUARTUS_PROJECT_DIR)/payload_buffer.hex";
               }
            }
            TARGET sim
            {
               payload_buffer 
               {
                  Command1 = "if [ ! -d $(SIMDIR) ]; then mkdir $(SIMDIR) ; fi";
                  Command2 = "@echo Hardware simulation is not enabled for the target SOPC Builder system. Skipping creation of hardware simulation model contents and simulation symbol files. \\(Note: This does not affect the instruction set simulator.\\)";
                  Command3 = "touch $(SIMDIR)/dummy_file";
                  Dependency = "$(ELF)";
                  Target_File = "$(SIMDIR)/dummy_file";
               }
            }
         }
      }
      SYSTEM_BUILDER_INFO 
      {
         Prohibited_Device_Family = "MERCURY, APEX20K, APEX20KE, APEX20KC, APEXII, ACEX1K, FLEX10KE, EXCALIBUR_ARM, MAXII";
         Instantiate_In_System_Module = "1";
         Is_Enabled = "1";
         Default_Module_Name = "onchip_memory";
         View 
         {
            MESSAGES 
            {
            }
            Is_Collapsed = "1";
         }
         Top_Level_Ports_Are_Enumerated = "1";
         Clock_Source = "clk";
      }
      SLAVE s1
      {
         PORT_WIRING 
         {
            PORT address
            {
               direction = "input";
               type = "address";
               width = "10";
               Is_Enabled = "1";
            }
            PORT byteenable
            {
               direction = "input";
               type = "byteenable";
               width = "2";
               Is_Enabled = "1";
            }
            PORT chipselect
            {
               direction = "input";
               type = "chipselect";
               width = "1";
               Is_Enabled = "1";
            }
            PORT clk
            {
               direction = "input";
               type = "clk";
               width = "1";
               Is_Enabled = "1";
            }
            PORT readdata
            {
               direction = "output";
               type = "readdata";
               width = "16";
               Is_Enabled = "1";
            }
            PORT write
            {
               direction = "input";
               type = "write";
               width = "1";
               Is_Enabled = "1";
            }
            PORT writedata
            {
               direction = "input";
               type = "writedata";
               width = "16";
               Is_Enabled = "1";
            }
            PORT clken
            {
               Is_Enabled = "1";
               default_value = "1'b1";
               direction = "input";
               type = "clken";
               width = "1";
            }
         }
         SYSTEM_BUILDER_INFO 
         {
            Bus_Type = "avalon";
            Is_Memory_Device = "1";
            Address_Alignment = "dynamic";
            Address_Width = "10";
            Data_Width = "16";
            Has_IRQ = "0";
            Read_Wait_States = "0";
            Write_Wait_States = "0";
            Address_Span = "2048";
            Read_Latency = "1";
            MASTERED_BY cpu_0/instruction_master
            {
               priority = "1";
            }
            MASTERED_BY cpu_0/data_master
            {
               priority = "1";
            }
            Base_Address = "0x00020000";
            IRQ_MASTER cpu_0/data_master
            {
               IRQ_Number = "NC";
            }
            Is_Base_Locked = "1";
            Is_Channel = "1";
            Is_Writable = "1";
         }
      }
      SLAVE s2
      {
         PORT_WIRING 
         {
         }
         SYSTEM_BUILDER_INFO 
         {
            Bus_Type = "avalon";
            Is_Memory_Device = "1";
            Address_Alignment = "dynamic";
            Address_Width = "10";
            Data_Width = "16";
            Has_IRQ = "0";
            Read_Wait_States = "0";
            Write_Wait_States = "0";
            Address_Span = "2048";
            Read_Latency = "1";
            Is_Enabled = "0";
            Is_Channel = "1";
            Is_Writable = "1";
         }
      }
      SIMULATION 
      {
         DISPLAY 
         {
            SIGNAL a
            {
               name = "chipselect";
               conditional = "1";
            }
            SIGNAL b
            {
               name = "write";
               conditional = "1";
            }
            SIGNAL c
            {
               name = "address";
               radix = "hexadecimal";
            }
            SIGNAL d
            {
               name = "byteenable";
               radix = "binary";
               conditional = "1";
            }
            SIGNAL e
            {
               name = "readdata";
               radix = "hexadecimal";
            }
            SIGNAL f
            {
               name = "writedata";
               radix = "hexadecimal";
               conditional = "1";
            }
         }
      }
      PORT_WIRING 
      {
      }
   }
   MODULE jtag_uart_0
   {
      class = "altera_avalon_jtag_uart";
      class_version = "1.0";
      iss_model_name = "altera_avalon_jtag_uart";
      SLAVE avalon_jtag_slave
      {
         SYSTEM_BUILDER_INFO 
         {
            Bus_Type = "avalon";