fet140_uart05_09600.s43

MSP430F135的UART操作代码,绝对的真实可行.放心下载

;******************************************************************************
;   MSP-FET430P140 Demo - USART0, Ultra-Low Pwr UART 9600 Echo ISR, 32kHz ACLK
;
;   Description: Echo a received character, RX ISR used. Normal mode is LPM3,
;   USART0 RX interrupt triggers TX Echo.
;   ACLK = UCLK0 = LFXT1 = 32768, MCLK = SMCLK = DCO~ 800k
;   Baud rate divider with 32768hz XTAL @9600 = 32768Hz/9600 = 3.41 (0003h 4Ah )
;   //* An external watch crystal is required on XIN XOUT for ACLK *//	
;
;
;                 MSP430F149
;             -----------------
;         /|\|              XIN|-
;          | |                 | 32kHz
;          --|RST          XOUT|-
;            |                 |
;            |             P3.4|----------->
;            |                 | 9600 - 8N1
;            |             P3.5|<-----------
;
;   M. Buccini
;   Texas Instruments Inc.
;   Feb 2005
;   Built with IAR Embedded Workbench Version: 3.21A
;******************************************************************************
#include  <msp430x14x.h>
;------------------------------------------------------------------------------
            ORG     01100h                  ; Program Start
;------------------------------------------------------------------------------
RESET       mov.w   #0A00h,SP               ; Initialize stackpointer
StopWDT     mov.w   #WDTPW+WDTHOLD,&WDTCTL  ; Stop WDT
SetupP3     bis.b   #030h,&P3SEL            ; P3.4,5 = USART0 TXD/RXD
SetupUART0  bis.b   #UTXE0+URXE0,&ME1       ; Enable USART0 TXD/RXD
            bis.b   #CHAR,&UCTL0            ; 8-bit characters
            mov.b   #SSEL0,&UTCTL0          ; UCLK = ACLK
            mov.b   #003h,&UBR00            ; 32k/9600 - 3.41
            mov.b   #000h,&UBR10            ;
            mov.b   #04Ah,&UMCTL0           ; Modulation
            bic.b   #SWRST,&UCTL0           ; **Initialize USART state machine**
            bis.b   #URXIE0,&IE1            ; Enable USART0 RX interrupt
                                            ;
Mainloop    bis.b   #LPM3+GIE,SR            ; Enter LPM3, interrupts enabled
            nop                             ; Required for debugger
                                            ;
;------------------------------------------------------------------------------
USART0RX_ISR;  Echo back RXed character, confirm TX buffer is ready first
;------------------------------------------------------------------------------
TX1         bit.b   #UTXIFG0,&IFG1          ; USART0 TX buffer ready?
            jz      TX1                     ; Jump is TX buffer not ready
            mov.b   &RXBUF0,&TXBUF0         ; TX -> RXed character
            reti                            ;
                                            ;
;------------------------------------------------------------------------------
;           Interrupt Vectors
;------------------------------------------------------------------------------
            ORG     0FFFEh                  ;
            DW      RESET                   ; POR, ext. Reset, Watchdog
            ORG     0FFF2h                  ;
            DW      USART0RX_ISR            ; USART0 receive
            END