fet140_dma_03.s43

基于IAR Workbench for MSP430 的汇编语言例程

;******************************************************************************
;   MSP-FET430P140 Demo - DMA0 Repeated Block UART1 9600, CCR2IFG, ACLK
;
;   Description; DMA0 is used to transfer a string byte-by-byte as a repeating
;   block to U1TXBUF. Timer_A operates continuously at 32768Hz with CCR2IFG 
;   triggering DMA0. "Hello World" is TX'd via 9600 baud UART1.
;   ACLK= TACLK 32768Hz, MCLK= SMCLK= default DCO ~ 800k
;   Baud rate divider with 32768hz XTAL @9600 = 32768Hz/9600 = 3.41 (000Dh 4Ah )
;   //*An external watch crystal on XIN XOUT is required for ACLK*//	  
;   //*MSP430F169 Device Required*//
; 
;                MSP430F169
;             -----------------
;         /|\|              XIN|-  
;          | |                 | 32768Hz
;          --|RST          XOUT|-
;            |                 |
;            |             P3.6|------------> "Hello World"
;            |                 | 9600 - 8N1
;
LF           equ    0ah                     ; ASCII Line Feed
CR           equ    0dh                     ; ASCII Carriage Return
Delta        equ    256                     ; Delta = (target DCO)/(4096) = 1048576
;
;   M.Buccini
;   Texas Instruments, Inc
;   January 2004
;******************************************************************************
#include  "msp430x16x.h"
;------------------------------------------------------------------------------ 
            ORG     01100h                  ; Progam Start 
;------------------------------------------------------------------------------ 
RESET       mov.w   #0A00h,SP               ; Initialize 'x1x9 stackpointer
StopWDT     mov.w   #WDTPW+WDTHOLD,&WDTCTL  ; Stop WDT
SetupP3     bis.b   #0C0h,&P3SEL            ; P3.6,7 = USART1 TXD/RXD
SetupUART0  bis.b   #UTXE1+URXE1,&ME2       ; Enable USART1 TXD/RXD
            bis.b   #CHAR,&UCTL1            ; 8-bit characters
            mov.b   #SSEL0,&UTCTL1          ; UCLK = ACLK
            mov.b   #003h,&UBR01            ; 32k/9600=3.41
            mov.b   #000h,&UBR11            ; 
            mov.b   #04Ah,&UMCTL1           ; no modulation 
            bic.b   #SWRST,&UCTL1           ; **Initialize USART state machine**
SetupDMA0   mov.w   #DMA0TSEL_1,&DMACTL0    ; CCR2 trigger
            mov.w   #String1,&DMA0SA        ; Source block address
            mov.w   #TXBUF1,&DMA0DA         ; Destination single address
            mov.w   #0013,&DMA0SZ           ; Block size
            mov.w   #DMADT_4+DMASRCINCR_3+DMASBDB+DMAEN,&DMA0CTL; Repeat, inc src
SetupTA     mov.w   #08192,&TACCR0          ; Char freq = TACLK/CCR0
            mov.w   #01,&TACCR2             ; DMA0 trigger
            mov.w   #TASSEL_1+MC_1,&TACTL   ; ACLK, up-mode
                                            ;                                                     
Mainloop    bis.w   #LPM3,SR                ; Enter LPM3
            nop                             ; Required only for debugger
                                            ;            
String1      DB CR,LF, 'Hello World' 
                                            ;              
;----------------------------------------------------------------------------- 
;           Interrupt Vectors Used MSP430x15x/16x          
;----------------------------------------------------------------------------- 
            ORG     0FFFEh                  ; MSP430 RESET Vector
            DW      RESET                   ; 
            END