fet140_demolist_s43.txt

来自「基于IAR Workbench for MSP430 的汇编语言例程」· 文本 代码 · 共 120 行

<li>fet140_1.s43 - Software Toggle P1.0</li> 
<li>fet140_adc12_01.s43 - ADC12 Sample A0 Set P1.0 if A0 > 0.5*AVcc</li>
<li>fet140_adc12_02.s43 - ADC12 Using the Internal Reference</li>
<li>fet140_adc12_03.s43 - ADC12 Using an External Reference</li> 
<li>fet140_adc12_04.s43 - ADC12 Extended sampling</li> 
<li>fet140_adc12_05.s43 - ADC12 Using an External Reference</li> 
<li>fet140_adc12_06.s43 - ADC12 Repeated Sequence of Conversions</li>
<li>fet140_adc12_07.s43 - ADC12 Repeated Single Channel Conversions</li> 
<li>fet140_adc12_08.s43 - ADC12 Using 10 External Channels for Conversion</li> 
<li>fet140_adc12_09.s43 - ADC12 Sequence of Conversions (non-repeated)</li> 
<li>fet140_adc12_10.s43 - ADC12 Sample A10 Temp and Convert to oC and oF</li> 
<li>fet140_clks.s43 - BasicClock Output buffered SMCLK, ACLK and MCLK</li>
<li>fet140_dac12_01.s43 - DAC12.0 Output 1V</li>
<li>fet140_dac12_02.s43 - DAC12.1 Output 2V</li>
<li>fet140_dac12_03.s43 - DAC12.0 Output Voltage Ramp on P6.6</li>
<li>fet140_dma_01.s43 - DMA0 Repeated Burst to-from RAM, Software Trigger</li>
<li>fet140_dma_02.s43 - DMA0 Repeated Block To P1OUT, TACCR2, DCO</li>
<li>fet140_dma_03.s43 - DMA0 Repeated Block UART1 9600, TACCR2, ACLK</li>
<li>fet140_dma_04.s43 - DMA0 Block Mode UART1 9600, ACLK</li>
<li>fet140_dma_05.s43 - DMA0 Repeated Block to DAC0 Sine Output, TACCR1, DCO</li>
<li>fet140_dma_06.s43 - DMA0 Repeated Block to DAC1 8-bit Sine Output, TBCCR2, DCO</li>
<li>fet140_dma_07.s43 - DMA0/1 Repeated Block to DAC0/1 Sin/Cos, TACCR1, XT2</li>
<li>fet140_dma_08.s43 - DMA0 Repeated Block, I2C Master Interface DAC8571,DCO</li>
<li>fet140_flash_write.s43 - Flash In-System Programming</li> 
<li>fet140_fll.s43 - BasicClock Implement Auto RSEL SW FLL</li>
<li>fet140_fll2.s43 - BasicClock Implement Continous SW FLL with Auto RSEL</li>
<li>fet140_hfxt2.s43 - BasicClock MCLK configured with HF XTAL XT2</li>
<li>fet140_hfxtal.s43 - BasicClock LFXT1/MCLK configured with HF XTAL</li>  
<li>fet140_hfxtal_nmi.s43 - BasicClock MCLK configured with HF XTAL and OscFault</li>
<li>fet140_i2c_01.s43 - I2C Master Interface TMP100, Set P1.0 if Temp > 28c </li>
<li>fet140_i2c_02.s43 - I2C Master - I2C Master Interface PCF8574 Read / Write</li>
<li>fet140_i2c_03.s43 - I2C Master Interface DAC8571</li>
<li>fet140_i2c_mstr.s43 - I2C Master reads from MSP430 Slave</li>
<li>fet140_i2c_multi.s43 - I2C Multimaster Interface</li>
<li>fet140_i2c_slav.s43 - I2C Slave Read from MSP430 Master</li>
<li>fet140_lpm3.s43 - BasicClock LPM3 Using WDT Interrupt ISR, 32kHz ACLK</li> 
<li>fet140_nmi.s43 - BasicClock Configure RST/NMI as NMI</li>
<li>fet140_rosc.s43 - BasicClock DCOCLK Biased with External Resistor Rosc</li>  
<li>fet140_spi0_0164.s43 - SPI0 Interface to HC164 Shift Register</li> 
<li>fet140_spi0_0165.s43 - SPI0 Interface to HC165 Shift Register</li>  
<li>fet140_spi0_016x.s43 - SPI0 Interface to HC165/164 Shift Registers</li>
<li>fet140_spi0_0549.s43 - SPI0 Interface to TLC549 8-bit ADC</li>
<li>fet140_spi0_1549.s43 - SPI0 Interface to TLV1549 10-bit ADC</li>
<li>fet140_spi0_5616.s43 - SPI0 Interface to TLV5516 DAC</li>
<li>fet140_spi1_0549.s43 - SPI1 Interface to TLC549 8-bit ADC</li>
<li>fet140_spi1_1549.s43 - SPI1 Interface to TLV1549 10-bit ADC</li>
<li>fet140_spi1_5616.s43 - SPI1 Interface to TLV5516 DAC</li>
<li>fet140_svs01.s43 - SVS POR @ 2.5V VCC</li>
<li>fet140_ta01.s43 - Timer_A Toggle P1.0, CCR0 Contmode ISR, DCO SMCLK</li>  
<li>fet140_ta02.s43 - Timer_A Toggle P1.0, CCR0 upmode ISR, DCO SMCLK</li>  
<li>fet140_ta03.s43 - Timer_A Toggle P1.0, overflow ISR, DCO SMCLK</li> 
<li>fet140_ta04.s43 - Timer_A Toggle P1.0, overflow ISR, 32kHz ACLK</li>  
<li>fet140_ta05.s43 - Timer_A Toggle P1.0, CCR0 upmode ISR, 32kHz ACLK</li>  
<li>fet140_ta06.s43 - Timer_A Toggle P1.0, CCR1 Contmode ISR, DCO SMCLK</li> 
<li>fet140_ta07.s43 - Timer_A Toggle P1.0-3, CCRx Contmode ISR, DCO SMCLK</li> 
<li>fet140_ta08.s43 - Timer_A Toggle P1.0-3, CCRx Contmode ISR, 32kHz ACLK</li> 
<li>fet140_ta09.s43 - Timer_A Toggle P1.0-3, CCRx Contmode ISR, HF XTAL ACLK</li> 
<li>fet140_ta10.s43 - Timer_A Toggle P1.1 With TA0 upmode, DCO SMCLK</li>
<li>fet140_ta11.s43 - Timer_A Toggle P1.1 With TA0 upmode, 32kHz ACLK</li>
<li>fet140_ta12.s43 - Timer_A Toggle P1.1 With TA0 upmode, HF XTAL ACLK</li>
<li>fet140_ta13.s43 - Timer_A Toggle P1.1 With TA0 up-downmode, DCO SMCLK</li>
<li>fet140_ta14.s43 - Timer_A Toggle P1.1 With TA0 up-downmode, 32kHz ACLK</li>
<li>fet140_ta15.s43 - Timer_A Toggle P1.1 With TA0 up-downmode, HF XTAL ACLK</li>
<li>fet140_ta_pwm01.s43 - Timer_A PWM TA1-2 upmode, DCO SMCLK</li>
<li>fet140_ta_pwm02.s43 - Timer_A PWM TA1-2 upmode, 32kHz ACLK</li>
<li>fet140_ta_pwm03.s43 - Timer_A PWM TA1-2 upmode, HF XTAL ACLK</li>
<li>fet140_ta_pwm04.s43 - Timer_A PWM TA1-2 up-downmode, DCO SMCLK</li>
<li>fet140_ta_pwm05.s43 - Timer_A PWM TA1-2 up-downmode, 32kHz ACLK</li>
<li>fet140_ta_pwm06.s43 - Timer_A PWM TA1-2 up-downmode, HF XTAL ACLK</li>
<li>fet140_ta_pwm07.s43 - Timer_A PWM TA1-2 upmode, XT2 HF XTAL SMCLK</li>
<li>fet140_ta_pwm08.s43 - Timer_A PWM TA1-2 up-downmode, XT2 HF XTAL SMCLK</li>
<li>fet140_tb01.s43 - Timer_B Toggle P1.0, CCR0 Contmode ISR, DCO SMCLK</li>  
<li>fet140_tb02.s43 - Timer_B Toggle P1.0, CCR0 upmode ISR, DCO SMCLK</li>  
<li>fet140_tb03.s43 - Timer_B Toggle P1.0, overflow ISR, DCO SMCLK</li> 
<li>fet140_tb04.s43 - Timer_B Toggle P1.0, overflow ISR, 32kHz ACLK</li>  
<li>fet140_tb05.s43 - Timer_B Toggle P1.0, CCR0 upmode ISR, 32kHz ACLK</li>  
<li>fet140_tb06.s43 - Timer_B Toggle P4.0-6, CCR1 Contmode ISR, DCO SMCLK</li> 
<li>fet140_tb07.s43 - Timer_B Toggle P4.0-6, CCRx Contmode ISR, DCO SMCLK</li> 
<li>fet140_tb08.s43 - Timer_B Toggle P4.0-6, CCRx Contmode ISR, 32kHz ACLK</li> 
<li>fet140_tb09.s43 - Timer_B Toggle P4.0-6, CCRx Contmode ISR, HF XTAL ACLK</li> 
<li>fet140_tb_pwm01.s43 - Timer_B PWM TB1-6 upmode, DCO SMCLK</li>
<li>fet140_tb_pwm02.s43 - Timer_B PWM TB1-6 upmode, 32kHz ACLK</li>
<li>fet140_tb_pwm03.s43 - Timer_B PWM TB1-2 upmode, HF XTAL ACLK</li>
<li>fet140_tb_pwm04.s43 - Timer_B PWM TB1-2 up-downmode, DCO SMCLK</li>
<li>fet140_tb_pwm05.s43 - Timer_B PWM TB1-2 up-downmode, 32kHz ACLK</li>
<li>fet140_tb_pwm06.s43 - Timer_B PWM TB1-2 up-downmode, HF XTAL ACLK</li>
<li>fet140_tb_pwm07.s43 - Timer_B PWM TB1-6 upmode, XT2 HF XTAL SMCLK</li>
<li>fet140_tb_pwm08.s43 - Timer_B PWM TB1-6 up-downmode, XT2 HF XTAL SMCLK</li>
<li>fet140_uart01_0115k.s43 - UART 115200 Echo ISR, XT2 HF XTAL SMCLK</li>
<li>fet140_uart01_0115k_2.s43 - UART 115200 Echo ISR, XT2 HF XTAL SMCLK</li> 
<li>fet140_uart01_02400.s43 - UART0 2400 Ultra-low Power Echo ISR, 32kHz ACLK</li>
<li>fet140_uart01_09600.s43 - UART0 9600 Echo ISR, HF XTAL ACCLK</li>
<li>fet140_uart02_09600.s43 - UART0 9600 Ultra-low Echo ISR, 32kHz ACLK + DCO</li>
<li>fet140_uart03_09600.s43 - UART0 9600 Echo ISR, 32kHz ACLK + DCO</li>
<li>fet140_uart04_09600.s43 - UART0 9600 Echo ISR, No XTAL, DCO Only</li>
<li>fet140_uart05_09600.s43 - UART0 9600 Ultra-low Power Echo ISR, 32kHz ACLK</li>
<li>fet140_uart06_09600.s43 - UART0 9600 Ultra-low Power String, 32kHz ACLK</li>
<li>fet140_uart07_09600.s43 - UART0 9600 Ultra-low Power RX/TX, 32kHz ACLK</li>
<li>fet140_uart08_09600.s43 - UART0 9600 Full-Duplex Transceiver, 32K ACLK</li>
<li>fet140_uart01_19200.s43 - UART0 19200 Echo ISR, HF XTAL ACLK</li> 
<li>fet140_uart02_19200.s43 - UART0 19200 Ultra-low Echo ISR, 32kHz ACLK + DCO</li>
<li>fet140_uart03_19200.s43 - UART0 19200 Echo ISR, 32kHz ACLK + DCO</li>
<li>fet140_uart04_19200.s43 - UART0 19200 Echo ISR, No XTAL, DCO Only</li>
<li>fet140_uart01_19200_2.s43 - UART0 19200 Echo ISR, XT2 HF XTAL SMCLK</li> 
<li>fet140_uart11_0115k.s43 - UART1 115200 Echo ISR, HF XTAL ACLK</li>
<li>fet140_uart11_0115k_2.s43 - UART1 115200 Echo ISR, XT2 HF XTAL SMCLK</li> 
<li>fet140_uart11_02400.s43 - UART1 2400 Ultra-low Power Echo ISR, 32kHz ACLK</li>
<li>fet140_uart11_09600.s43 - UART1 9600 Echo ISR, HF XTAL ACCLK</li>
<li>fet140_uart11_19200.s43 - UART1 19200 Echo ISR, HF XTAL ACLK</li> 
<li>fet140_uart11_19200_2.s43 - UART1 19200 Echo ISR, XT2 HF XTAL SMCLK</li> 
<li>fet140_uartxx_00123.s43 - UART0/1 19200-115200 Router XT2 HF XTAL SMCLK</li> 
<li>fet140_wdt01.s43 - WDT Toggle P1.0 Interval overflow ISR, DCO SMCLK</li>
<li>fet140_wdt02.s43 - WDT Toggle P1.0 Interval overflow ISR, 32kHz ACLK</li>
<li>fet140_wdt03.s43 - WDT Toggle P1.0 Interval overflow ISR, HF XTAL ACLK</li>