fet140_uart05_09600.s43

基于IAR Workbench for MSP430 的汇编语言例程

;******************************************************************************
;   MSP-FET430P140 Demo - USART0 UART 9600 Ultra-low Power Echo ISR, 32kHz ACLK
;
;   Description; Echo a received character, RX ISR used. Normal mode is LPM3, 
;   USART0 RX interrupt triggers TX Echo.   
;   ACLK = UCLK0 = LFXT1 = 32768, MCLK = SMCLK = DCO~ 800k  
;   Baud rate divider with 32768hz XTAL @9600 = 32768Hz/9600 = 3.41 (000Dh 4Ah )
;  //*An external watch crystal is required on XIN XOUT for ACLK*//	  
;
;              
;                 MSP430F149
;             -----------------
;         /|\|              XIN|-  
;          | |                 | 32kHz  
;          --|RST          XOUT|-
;            |                 |
;            |             P3.4|-----------> 
;            |                 | 9600 - 8N1
;            |             P3.5|<-----------
;
;   M.Buccini
;   Texas Instruments, Inc
;   January 2004
;******************************************************************************
#include  "msp430x14x.h"
;------------------------------------------------------------------------------ 
            ORG     01100h                  ; Program Start
;------------------------------------------------------------------------------ 
RESET       mov.w   #0A00h,SP               ; Initialize 'x1x9 stackpointer
StopWDT     mov.w   #WDTPW+WDTHOLD,&WDTCTL  ; Stop WDT
SetupP3     bis.b   #030h,&P3SEL            ; P3.4,5 = USART0 TXD/RXD
SetupUART0  bis.b   #UTXE0+URXE0,&ME1       ; Enable USART0 TXD/RXD
            bis.b   #CHAR,&UCTL0            ; 8-bit characters
            mov.b   #SSEL0,&UTCTL0          ; UCLK = ACLK
            mov.b   #003h,&UBR00            ; 32k/9600 - 3.41
            mov.b   #000h,&UBR10            ; 
            mov.b   #04Ah,&UMCTL0           ; Modulation 
            bic.b   #SWRST,&UCTL0           ; **Initialize USART state machine**
            bis.b   #URXIE0,&IE1            ; Enable USART0 RX interrupt
                                            ;             
Mainloop    bis.b   #LPM3+GIE,SR            ; Enter LPM3, interrupts enabled
            nop                             ; Required for debugger
                                            ;
;------------------------------------------------------------------------------ 
USART0RX_ISR;  Echo back RXed character, confirm TX buffer is ready first
;------------------------------------------------------------------------------ 
TX1         bit.b   #UTXIFG0,&IFG1          ; USART0 TX buffer ready?
            jz      TX1                     ; Jump is TX buffer not ready
            mov.b   &RXBUF0,&TXBUF0         ; TX -> RXed character
            reti                            ; 
                                            ;
;------------------------------------------------------------------------------ 
;           Interrupt Vectors Used MSP430x13x/14x/15x/16x        
;------------------------------------------------------------------------------ 
            ORG     0FFFEh                  ; 
            DW      RESET                   ; POR, ext. Reset, Watchdog
            ORG     0FFF2h                  ; 
            DW      USART0RX_ISR            ; USART0 receive
            end