fet140_i2c_02.s43

基于IAR Workbench for MSP430 的汇编语言例程

;******************************************************************************
;   MSP-FET430P140 Demo - I2C Master Interface PCF8574 Read / Write   
;
;   Description: I2C communication with a PCF8574 in read and write mode is 
;   demonstrated. PCF8574 port P is configured with P0-P3 input, P4-P7. Read 
;   P0-P3 input data is written back to Port P4-P7. 
;   ACLK = n/a, MCLK = SMCLK = default DCO ~ 800k, SCL = SMCLK/10
;   //* MSP430F169 Device Required*//
;
;                                 MSP430F169      
;                              -----------------
;                  /|\ /|\ /|\|              XIN|- 
;                  10k 10k  | |                 |
;       PCF8574     |   |   --|RST          XOUT|-
;       ---------   |   |     |                 |
;  --->|P0    SDA|<-|---+---->|P3.1/SDA         | 
;  --->|P1       |  |         |                 |
;  --->|P2       |  |         |                 |
;  --->|P3    SCL|<-+---------|P3.3/SCL         |
;  <---|P4       |            |                 |     
;  <---|P5       |            |                 |
;  <---|P6       |            |                 |
;  <---|P7       |            |                 |
;   +--|A0,A1,A2 |            |                 |
;   |  |         |            |                 |
;  \|/                     
;
;
;   M. Buccini
;   Texas Instruments
;   June 2004
;******************************************************************************
#include  "msp430x16x.h"
;------------------------------------------------------------------------------ 
            ORG     01100h                  ; Progam Start 
;------------------------------------------------------------------------------ 
RESET       mov.w   #0A00h,SP               ; Initialize 'F1x9 stackpointer
            mov.w   #WDTPW+WDTHOLD,&WDTCTL  ; Stop Watchdog Timer             
SetupP3     bis.b   #0Ah,&P3SEL             ; Assign I2C pins to module           
Setupi2c    bis.b   #I2C+SYNC,&U0CTL        ; Switch USART0 to I2C mode  
            bic.b   #I2CEN, U0CTL           ; Recommended I2C init procedure                     
            mov.b   #I2CSSEL_2,&I2CTCTL     ; SMCLK
            mov.b   #003h,&I2CSCLH          ; High period of SCL
            mov.b   #003h,&I2CSCLL          ; Low period of SCL                                                                                                                                                     
            mov.b   #001h,&I2CNDAT          ; transmit one byte                        
            mov.w   #20h,&I2CSA             ; Set slave address
            bis.b   #I2CEN,&U0CTL           ; Enable I2C                          
            mov.b   #RXRDYIE,&I2CIE         ; I2C receive ready interrupt enable
            mov.w   #CCIE,&CCTL0            ; CCR0 interrupt enabled
            mov.w   #TASSEL_2+ MC_2,&TACTL  ; SMCLK, contmode
                                            ;
Mainloop    bis.w   #CPUOFF+GIE,SR          ; CPU off, interrupts enabled
            nop                             ; Required for debugger
                                            ;
;------------------------------------------------------------------------------ 
TA0_ISR;   
;------------------------------------------------------------------------------ 
            bis.b   #MST,&U0CTL             ; Master
            mov.b   #I2CSTT+I2CSTP,&I2CTCTL ; Recieve, ST, SP (Clears I2CTRX)
            reti                            ;		 
                                            ;
;------------------------------------------------------------------------------ 
USART0TX_ISR;
;------------------------------------------------------------------------------ 
            add.w   &I2CIV,PC               ; Add offset vector
            reti                            ; 0
            reti                            ; 2
            reti                            ; 4
            reti                            ; 6
            reti                            ; 8
            jmp     I2C_RXrdy               ; 10
            reti                            ; 12
            reti                            ; 14
            reti                            ; 16

I2C_RXrdy   mov.b   &I2CDRB,R4              ;
            rlc.b   R4                      ;
            rlc.b   R4                      ;
            rlc.b   R4                      ;
            rlc.b   R4                      ;
            bis.b   #0Fh,R4                 ;
            mov.b   R4,&I2CDRB              ;
            bis.b   #MST,&U0CTL             ; Master
            bis.b   #I2CTRX+I2CSTT+I2CSTP,&I2CTCTL ; Transmit, ST, SP
            reti                            ;		 
                                            ;
;------------------------------------------------------------------------------ 
;           Interrupt Vectors Used MSP430x13x/14x/15x/16x         
;------------------------------------------------------------------------------ 
            ORG     0FFFEh                  ; MSP430 RESET Vector
            DW      RESET                   ; 
            ORG     0FFF0h                  ; 
            DW      USART0TX_ISR            ; USART0 transmit
            ORG     0FFECh                  ;
            DW      TA0_ISR                 ; Timer_A0 Vector 
            END