📄 cciss.h
字号:
#ifndef CCISS_H#define CCISS_H#include <linux/genhd.h>#include "cciss_cmd.h"#define NWD 16#define NWD_SHIFT 4#define MAX_PART (1 << NWD_SHIFT)#define IO_OK 0#define IO_ERROR 1#define MAJOR_NR COMPAQ_CISS_MAJORstruct ctlr_info;typedef struct ctlr_info ctlr_info_t;struct access_method { void (*submit_command)(ctlr_info_t *h, CommandList_struct *c); void (*set_intr_mask)(ctlr_info_t *h, unsigned long val); unsigned long (*fifo_full)(ctlr_info_t *h); unsigned long (*intr_pending)(ctlr_info_t *h); unsigned long (*command_completed)(ctlr_info_t *h);};typedef struct _drive_info_struct{ __u32 LunID; int usage_count; struct request_queue *queue; sector_t nr_blocks; int block_size; int heads; int sectors; int cylinders; int raid_level; /* set to -1 to indicate that * the drive is not in use/configured */ int busy_configuring; /*This is set when the drive is being removed *to prevent it from being opened or it's queue *from being started. */} drive_info_struct;struct ctlr_info { int ctlr; char devname[8]; char *product_name; char firm_ver[4]; // Firmware version struct pci_dev *pdev; __u32 board_id; void __iomem *vaddr; unsigned long paddr; unsigned long io_mem_addr; unsigned long io_mem_length; CfgTable_struct __iomem *cfgtable; unsigned int intr; int interrupts_enabled; int major; int max_commands; int commands_outstanding; int max_outstanding; /* Debug */ int num_luns; int highest_lun; int usage_count; /* number of opens all all minor devices */ // information about each logical volume drive_info_struct drv[CISS_MAX_LUN]; struct access_method access; /* queue and queue Info */ CommandList_struct *reqQ; CommandList_struct *cmpQ; unsigned int Qdepth; unsigned int maxQsinceinit; unsigned int maxSG; spinlock_t lock; //* pointers to command and error info pool */ CommandList_struct *cmd_pool; dma_addr_t cmd_pool_dhandle; ErrorInfo_struct *errinfo_pool; dma_addr_t errinfo_pool_dhandle; unsigned long *cmd_pool_bits; int nr_allocs; int nr_frees; int busy_configuring; int busy_initializing; /* This element holds the zero based queue number of the last * queue to be started. It is used for fairness. */ int next_to_run; // Disk structures we need to pass back struct gendisk *gendisk[NWD];#ifdef CONFIG_CISS_SCSI_TAPE void *scsi_ctlr; /* ptr to structure containing scsi related stuff */#endif unsigned char alive;};/* Defining the diffent access_menthods *//* * Memory mapped FIFO interface (SMART 53xx cards) */#define SA5_DOORBELL 0x20#define SA5_REQUEST_PORT_OFFSET 0x40#define SA5_REPLY_INTR_MASK_OFFSET 0x34#define SA5_REPLY_PORT_OFFSET 0x44#define SA5_INTR_STATUS 0x30#define SA5_SCRATCHPAD_OFFSET 0xB0#define SA5_CTCFG_OFFSET 0xB4#define SA5_CTMEM_OFFSET 0xB8#define SA5_INTR_OFF 0x08#define SA5B_INTR_OFF 0x04#define SA5_INTR_PENDING 0x08#define SA5B_INTR_PENDING 0x04#define FIFO_EMPTY 0xffffffff #define CCISS_FIRMWARE_READY 0xffff0000 /* value in scratchpad register */#define CISS_ERROR_BIT 0x02#define CCISS_INTR_ON 1 #define CCISS_INTR_OFF 0/* Send the command to the hardware */static void SA5_submit_command( ctlr_info_t *h, CommandList_struct *c) {#ifdef CCISS_DEBUG printk("Sending %x - down to controller\n", c->busaddr );#endif /* CCISS_DEBUG */ writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET); h->commands_outstanding++; if ( h->commands_outstanding > h->max_outstanding) h->max_outstanding = h->commands_outstanding;}/* * This card is the opposite of the other cards. * 0 turns interrupts on... * 0x08 turns them off... */static void SA5_intr_mask(ctlr_info_t *h, unsigned long val){ if (val) { /* Turn interrupts on */ h->interrupts_enabled = 1; writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); } else /* Turn them off */ { h->interrupts_enabled = 0; writel( SA5_INTR_OFF, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); }}/* * This card is the opposite of the other cards. * 0 turns interrupts on... * 0x04 turns them off... */static void SA5B_intr_mask(ctlr_info_t *h, unsigned long val){ if (val) { /* Turn interrupts on */ h->interrupts_enabled = 1; writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); } else /* Turn them off */ { h->interrupts_enabled = 0; writel( SA5B_INTR_OFF, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET); }}/* * Returns true if fifo is full. * */ static unsigned long SA5_fifo_full(ctlr_info_t *h){ if( h->commands_outstanding >= h->max_commands) return(1); else return(0);}/* * returns value read from hardware. * returns FIFO_EMPTY if there is nothing to read */ static unsigned long SA5_completed(ctlr_info_t *h){ unsigned long register_value = readl(h->vaddr + SA5_REPLY_PORT_OFFSET); if(register_value != FIFO_EMPTY) { h->commands_outstanding--;#ifdef CCISS_DEBUG printk("cciss: Read %lx back from board\n", register_value);#endif /* CCISS_DEBUG */ } #ifdef CCISS_DEBUG else { printk("cciss: FIFO Empty read\n"); }#endif return ( register_value); }/* * Returns true if an interrupt is pending.. */static unsigned long SA5_intr_pending(ctlr_info_t *h){ unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);#ifdef CCISS_DEBUG printk("cciss: intr_pending %lx\n", register_value);#endif /* CCISS_DEBUG */ if( register_value & SA5_INTR_PENDING) return 1; return 0 ;}/* * Returns true if an interrupt is pending.. */static unsigned long SA5B_intr_pending(ctlr_info_t *h){ unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);#ifdef CCISS_DEBUG printk("cciss: intr_pending %lx\n", register_value);#endif /* CCISS_DEBUG */ if( register_value & SA5B_INTR_PENDING) return 1; return 0 ;}static struct access_method SA5_access = { SA5_submit_command, SA5_intr_mask, SA5_fifo_full, SA5_intr_pending, SA5_completed,};static struct access_method SA5B_access = { SA5_submit_command, SA5B_intr_mask, SA5_fifo_full, SA5B_intr_pending, SA5_completed,};struct board_type { __u32 board_id; char *product_name; struct access_method *access;};#define CCISS_LOCK(i) (&hba[i]->lock)#endif /* CCISS_H */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -