ioleobj.cpp

英文版的 想要的话可以下载了 为大家服务

 *  pRectPos        LPRECT of the object in hWndParent where the
 *                  object can play in-place if desired.
 *
 * Return Value:
 *  HRESULT         NOERROR or a general error value.
 */

STDMETHODIMP CImpIOleObject::DoVerb(LONG iVerb, LPMSG pMSG
    , LPOLECLIENTSITE pActiveSite, LONG lIndex, HWND hWndParent
    , LPCRECT pRectPos)
    {
    HWND            hWnd, hWndT;

    //CHAPTER23MOD
    /*
     * Find the upper most window.  Note that for in-place activation
     * we must start at the document to find our uppermost frame because
     * the object editing window may be a child of the container now.
     */
    //End CHAPTER23MOD
    hWndT=GetParent(m_pObj->m_pDoc->Window());

    while (NULL!=hWndT)
        {
        hWnd=hWndT;
        hWndT=GetParent(hWndT);
        }

    switch (iVerb)
        {
        //CHAPTER23MOD
        case OLEIVERB_HIDE:
            if (NULL!=m_pObj->m_pIOleIPSite)
                m_pObj->InPlaceDeactivate();
            else
                {
                ShowWindow(hWnd, SW_HIDE);
                m_pObj->SendAdvise(OBJECTCODE_HIDEWINDOW);
                }
            break;

        case OLEIVERB_PRIMARY:
        case OLEIVERB_SHOW:
            //If already IP active, nothing much to do here.
            if (NULL!=m_pObj->m_pIOleIPSite)
                return NOERROR;

            if (m_pObj->m_fAllowInPlace)
                {
                if (SUCCEEDED(m_pObj->InPlaceActivate(pActiveSite
                    , TRUE)))
                    {
                    return NOERROR;
                    }
                }

            //FALL-THROUGH

        case OLEIVERB_OPEN:
            /*
             * If we're already in-place active, deactivate and
             * prevent later reactivation.
             */
            if (NULL!=m_pObj->m_pIOleIPSite)
                {
                m_pObj->InPlaceDeactivate();
                m_pObj->m_fAllowInPlace=FALSE;
                }

            /*
             * With all the in-place stuff gone, we can go back to
             * our normal open state.
             */

            ShowWindow(hWnd, SW_SHOW);
            SetForegroundWindow(hWnd);
            SetFocus(hWnd);

            m_pObj->SendAdvise(OBJECTCODE_SHOWOBJECT);
            m_pObj->SendAdvise(OBJECTCODE_SHOWWINDOW);
            break;

        case OLEIVERB_INPLACEACTIVATE:
            //This means activate in-place but no UI.
            return m_pObj->InPlaceActivate(pActiveSite, FALSE);

        case OLEIVERB_UIACTIVATE:
            //This means fully activate in-place with full UI
            return m_pObj->InPlaceActivate(pActiveSite, TRUE);

        case OLEIVERB_DISCARDUNDOSTATE:
            //We don't hold a state, but if you do, free it here.
            break;
        //End CHAPTER23MOD

        default:
            return ResultFromScode(OLEOBJ_S_INVALIDVERB);
        }

    return NOERROR;
    }





/*
 * CImpIOleObject::EnumVerbs
 *
 * Purpose:
 *  Creates an enumerator that knows the object's verbs.  If you
 *  need to change the verb list dynamically, then you'll need to
 *  implement this, otherwise you can return OLE_S_USEREG.
 *
 * Parameters:
 *  ppEnum          LPENUMOLEVERB * into which to return the
 *                  enum.
 *
 * Return Value:
 *  HRESULT         NOERROR or a general error value.
 */

STDMETHODIMP CImpIOleObject::EnumVerbs(LPENUMOLEVERB *ppEnum)
    {
    //Trivial implementation if you fill the regDB.
    return ResultFromScode(OLE_S_USEREG);
    }





/*
 * CImpIOleObject::Update
 *
 * Purpose:
 *  Insures that the object is up to date.  This is mostly used for
 *  caching but you must make sure that you recursively call all
 *  nested objects you contain as well.
 *
 * Parameters:
 *  None
 *
 * Return Value:
 *  HRESULT         NOERROR or a general error value.
 */

STDMETHODIMP CImpIOleObject::Update(void)
    {
    //We're always updated since we don't contain.
    return NOERROR;
    }





/*
 * CImpIOleObject::IsUpToDate
 *
 * Purpose:
 *  Returns if the object is currently up to date, which involves
 *  asking all contained object inside this object if they are up
 *  to date as well.
 *
 * Parameters:
 *  None
 *
 * Return Value:
 *  HRESULT         NOERROR if successful, S_FALSE if dirty.
 */

STDMETHODIMP CImpIOleObject::IsUpToDate(void)
    {
    //We're always updated since we don't contain.
    return NOERROR;
    }





/*
 * CImpIOleObject::GetUserClassID
 *
 * Purpose:
 *  Used for linked objects, this returns the class ID of what end
 *  users think they are editing.
 *
 * Parameters:
 *  pClsID          LPCLSID in which to store the CLSID.
 *
 * Return Value:
 *  HRESULT         NOERROR or a general error value.
 */

STDMETHODIMP CImpIOleObject::GetUserClassID(LPCLSID pClsID)
    {
    /*
     * If you are not registered to handle data other than yourself,
     * then you can just return your class ID here.  If you are
     * registered as usable from Treat-As dialogs, then you need
     * to return the CLSID of what you are really editing.
     */

    *pClsID=m_pObj->m_clsID;
    return NOERROR;
    }





/*
 * CImpIOleObject::GetUserType
 *
 * Purpose:
 *  Determines the user-presentable name of the object.
 *
 * Parameters:
 *  dwForm          DWORD describing which form of the string is
 *                  desired.
 *  pszType         LPOLESTR * into which to return the pointer to
 *                  the type string.
 *
 * Return Value:
 *  HRESULT         NOERROR or a general error value.
 */

STDMETHODIMP CImpIOleObject::GetUserType(DWORD dwForm
    , LPOLESTR *ppszType)
    {
    return ResultFromScode(OLE_S_USEREG);
    }





/*
 * CImpIOleObject::SetExtent
 *
 * Purpose:
 *  Sets the size of the object in HIMETRIC units.
 *
 * Parameters:
 *  dwAspect        DWORD of the aspect affected.
 *  pszl            LPSIZEL containing the new size.
 *
 * Return Value:
 *  HRESULT         NOERROR or a general error value.
 */

STDMETHODIMP CImpIOleObject::SetExtent(DWORD dwAspect, LPSIZEL pszl)
    {
    RECT            rc;
    SIZEL           szl;

    if (!(DVASPECT_CONTENT & dwAspect))
        return ResultFromScode(E_FAIL);

    XformSizeInHimetricToPixels(NULL, pszl, &szl);

    //This resizes the window to match the container's size.
    SetRect(&rc, 0, 0, (int)szl.cx, (int)szl.cy);
    m_pObj->m_pPL->SizeSet(&rc, TRUE);

    return NOERROR;
    }





/*
 * CImpIOleObject::GetExtent
 *
 * Purpose:
 *  Retrieves the size of the object in HIMETRIC units.
 *
 * Parameters:
 *  dwAspect        DWORD of the aspect requested
 *  pszl            LPSIZEL into which to store the size.
 *
 * Return Value:
 *  HRESULT         NOERROR or a general error value.
 */

STDMETHODIMP CImpIOleObject::GetExtent(DWORD dwAspect, LPSIZEL pszl)
    {
    RECT            rc;
    SIZEL           szl;

    if (!(DVASPECT_CONTENT & dwAspect))
        return ResultFromScode(E_FAIL);

    m_pObj->m_pPL->RectGet(&rc);
    szl.cx=rc.right-rc.left;
    szl.cy=rc.bottom-rc.top;

    XformSizeInPixelsToHimetric(NULL, &szl, pszl);
    return NOERROR;
    }





/*
 * CImpIOleObject::Advise
 *
 * Purpose:
 *  Provides an IAdviseSink to the object for notifications.
 *
 * Parameters:
 *  pIAdviseSink    LPADVISESINK to notify.
 *  pdwConn         LPDWORD into which to store a connection key.
 *
 * Return Value:
 *  HRESULT         NOERROR or a general error value.
 */

STDMETHODIMP CImpIOleObject::Advise(LPADVISESINK pIAdviseSink
    , LPDWORD pdwConn)
    {
    if (NULL==m_pObj->m_pIOleAdviseHolder)
        {
        HRESULT     hr;

        hr=CreateOleAdviseHolder(&m_pObj->m_pIOleAdviseHolder);

        if (FAILED(hr))
            return hr;
        }

    return m_pObj->m_pIOleAdviseHolder->Advise(pIAdviseSink
        , pdwConn);
    }





/*
 * CImpIOleObject::Unadvise
 *
 * Purpose:
 *  Terminates a previous advise connection from Advise.
 *
 * Parameters:
 *  dwConn          DWORD connection key from Advise.
 *
 * Return Value:
 *  HRESULT         NOERROR or a general error value.
 */

STDMETHODIMP CImpIOleObject::Unadvise(DWORD dwConn)
    {
    if (NULL!=m_pObj->m_pIOleAdviseHolder)
        return m_pObj->m_pIOleAdviseHolder->Unadvise(dwConn);

    return ResultFromScode(E_FAIL);
    }





/*
 * CImpIOleObject::EnumAdvise
 *
 * Purpose:
 *  Creates and returns a enumeration of the advises on this object.
 *
 * Parameters:
 *  ppEnum          LPENUMSTATDATA * in which to return the
 *                  enumerator.
 *
 * Return Value:
 *  HRESULT         NOERROR or a general error value.
 */

STDMETHODIMP CImpIOleObject::EnumAdvise(LPENUMSTATDATA *ppEnum)
    {
    if (NULL!=m_pObj->m_pIOleAdviseHolder)
        return m_pObj->m_pIOleAdviseHolder->EnumAdvise(ppEnum);

    return ResultFromScode(E_FAIL);
    }





/*
 * CImpIOleObject::GetMiscStatus
 *
 * Purpose:
 *  Returns a set of miscellaneous status flags for the object.
 *
 * Parameters:
 *  dwAspect        DWORD of the aspect in question.
 *  pdwStatus       LPDWORD in which to store the flags.
 *
 * Return Value:
 *  HRESULT         NOERROR or a general error value.
 */

STDMETHODIMP CImpIOleObject::GetMiscStatus(DWORD dwAspect
    , LPDWORD pdwStatus)
    {
    return ResultFromScode(OLE_S_USEREG);
    }





/*
 * CImpIOleObject::SetColorScheme
 *
 * Purpose:
 *  Provides the object with the color palette as recommended by
 *  the container application that also knows the palettes of other
 *  objects.  The object here is not required to use these colors.
 *
 * Parameters:
 *  pLP             LPLOGPALETTE providing the colors.
 *
 * Return Value:
 *  HRESULT         NOERROR or a general error value.
 */

STDMETHODIMP CImpIOleObject::SetColorScheme(LPLOGPALETTE pLP)
    {
    return ResultFromScode(E_NOTIMPL);
    }