example_28xswprioritizeddefaultisr.c

TI 281x DSP 各种通信接口驱动源代码

#endif

// Connected to PIEIER5_1 (use MINT5 and MG51 masks):
#if (G51PL != 0)
interrupt void T4PINT_ISR(void)    // EV-B
{
	// Set interrupt priority:
	volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
	IER |= M_INT5;
	IER	&= MINT5;	  	               // Set "global" priority
	PieCtrlRegs.PIEIER5.all &= MG51;   // Set "group"  priority	
	PieCtrlRegs.PIEACK.all = 0xFFFF;   // Enable PIE interrupts	
	EINT;

  	// Insert ISR Code here.......
  
  	
   for(i = 1; i <= 10; i++) {}

	// Restore registers saved:
	DINT;
	PieCtrlRegs.PIEIER5.all = TempPIEIER;

    //  Add ISR to Trace
    ISRTrace[ISRTraceIndex] = 0x0051;
    ISRTraceIndex++; 

}     
#endif

// Connected to PIEIER5_2 (use MINT5 and MG52 masks):
#if (G52PL != 0)
interrupt void T4CINT_ISR(void)    // EV-B
{
	// Set interrupt priority:
	volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
	IER |= M_INT5;
	IER	&= MINT5;	  	                // Set "global" priority
	PieCtrlRegs.PIEIER5.all &= MG52;   // Set "group"  priority	
	PieCtrlRegs.PIEACK.all = 0xFFFF;   // Enable PIE interrupts	
	EINT;

  	// Insert ISR Code here.......
  
  	
   for(i = 1; i <= 10; i++) {}

	// Restore registers saved:
	DINT;
	PieCtrlRegs.PIEIER5.all = TempPIEIER;

    //  Add ISR to Trace
    ISRTrace[ISRTraceIndex] = 0x0052;
    ISRTraceIndex++; 

}     
#endif
      
// Connected to PIEIER5_3 (use MINT5 and MG53 masks):
#if (G53PL != 0)
interrupt void T4UFINT_ISR(void)    // EV-B
{
	// Set interrupt priority:
	volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
	IER |= M_INT5;
	IER	&= MINT5;	  	                // Set "global" priority
	PieCtrlRegs.PIEIER5.all &= MG53;   // Set "group"  priority	
	PieCtrlRegs.PIEACK.all = 0xFFFF;   // Enable PIE interrupts	
	EINT;

  	// Insert ISR Code here.......
  
  	
   for(i = 1; i <= 10; i++) {}

	// Restore registers saved:
	DINT;
	PieCtrlRegs.PIEIER5.all = TempPIEIER;

    //  Add ISR to Trace
    ISRTrace[ISRTraceIndex] = 0x0053;
    ISRTraceIndex++; 

}     
#endif

// Connected to PIEIER5_4 (use MINT5 and MG54 masks):
#if (G54PL != 0)
interrupt void T4OFINT_ISR(void)    // EV-B
{
	// Set interrupt priority:
	volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
	IER |= M_INT5;
	IER	&= MINT5;	  	                // Set "global" priority
	PieCtrlRegs.PIEIER5.all &= MG54;   // Set "group"  priority	
	PieCtrlRegs.PIEACK.all = 0xFFFF;   // Enable PIE interrupts	
	EINT;

  	// Insert ISR Code here.......
  
  	
   for(i = 1; i <= 10; i++) {}

	// Restore registers saved:
	DINT;
	PieCtrlRegs.PIEIER5.all = TempPIEIER;

    //  Add ISR to Trace
    ISRTrace[ISRTraceIndex] = 0x0054;
    ISRTraceIndex++; 

}     
#endif

// Connected to PIEIER5_5 (use MINT5 and MG55 masks):
#if (G55PL != 0)
interrupt void CAPINT4_ISR(void)    // EV-B
{
	// Set interrupt priority:
	volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
	IER |= M_INT5;
	IER	&= MINT5;	  	                // Set "global" priority
	PieCtrlRegs.PIEIER5.all &= MG55;   // Set "group"  priority	
	PieCtrlRegs.PIEACK.all = 0xFFFF;   // Enable PIE interrupts	
	EINT;

  	// Insert ISR Code here.......
  
  	
   for(i = 1; i <= 10; i++) {}

	// Restore registers saved:
	DINT;
	PieCtrlRegs.PIEIER5.all = TempPIEIER;

    //  Add ISR to Trace
    ISRTrace[ISRTraceIndex] = 0x0055;
    ISRTraceIndex++; 

}     
#endif

// Connected to PIEIER5_6 (use MINT5 and MG56 masks):
#if (G56PL != 0)
interrupt void CAPINT5_ISR(void)    // EV-B
{
	// Set interrupt priority:
	volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
	IER |= M_INT5;
	IER	&= MINT5;	  	                // Set "global" priority
	PieCtrlRegs.PIEIER5.all &= MG56;   // Set "group"  priority	
	PieCtrlRegs.PIEACK.all = 0xFFFF;   // Enable PIE interrupts	
	EINT;

  	// Insert ISR Code here.......
  
  	
   for(i = 1; i <= 10; i++) {}

	// Restore registers saved:
	DINT;
	PieCtrlRegs.PIEIER5.all = TempPIEIER;

    //  Add ISR to Trace
    ISRTrace[ISRTraceIndex] = 0x0056;
    ISRTraceIndex++; 

}     
#endif

// Connected to PIEIER5_7 (use MINT5 and MG57 masks):
#if (G57PL != 0)
interrupt void CAPINT6_ISR(void)    // EV-B
{
	// Set interrupt priority:
	volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER5.all;
	IER |= M_INT5;
	IER	&= MINT5;	  	                // Set "global" priority
	PieCtrlRegs.PIEIER5.all &= MG57;   // Set "group"  priority	
	PieCtrlRegs.PIEACK.all = 0xFFFF;   // Enable PIE interrupts	
	EINT;

  	// Insert ISR Code here.......
  
  	
   for(i = 1; i <= 10; i++) {}

	// Restore registers saved:
	DINT;
	PieCtrlRegs.PIEIER5.all = TempPIEIER;

    //  Add ISR to Trace
    ISRTrace[ISRTraceIndex] = 0x0057;
    ISRTraceIndex++; 

}     
#endif


//---------------------------------------------------------------------------
// McBSP-A Default ISRs: 
//
// Connected to PIEIER6_5 (use MINT6 and MG65 masks):
#if (G65PL != 0)
interrupt void MRINTA_ISR(void)     // McBSP-A
{
	// Set interrupt priority:
	volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER6.all;
	IER |= M_INT6;
	IER	&= MINT6;	  	                // Set "global" priority
	PieCtrlRegs.PIEIER6.all &= MG65;   // Set "group"  priority	
	PieCtrlRegs.PIEACK.all = 0xFFFF;   // Enable PIE interrupts	
	EINT;

  	// Insert ISR Code here.......
  
  	
   for(i = 1; i <= 10; i++) {}

	// Restore registers saved:
	DINT;
	PieCtrlRegs.PIEIER6.all = TempPIEIER;

    //  Add ISR to Trace
    ISRTrace[ISRTraceIndex] = 0x0065;
    ISRTraceIndex++; 

}     
#endif

// Connected to PIEIER6_6 (use MINT6 and MG66 masks):
#if (G66PL != 0)
interrupt void MXINTA_ISR(void)     // McBSP-A
{
	// Set interrupt priority:
	volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER6.all;
	IER |= M_INT6;
	IER	&= MINT6;	  	                // Set "global" priority
	PieCtrlRegs.PIEIER6.all &= MG66;   // Set "group"  priority	
	PieCtrlRegs.PIEACK.all = 0xFFFF;   // Enable PIE interrupts	
	EINT;

  	// Insert ISR Code here.......
  
  	
   for(i = 1; i <= 10; i++) {}

	// Restore registers saved:
	DINT;
	PieCtrlRegs.PIEIER6.all = TempPIEIER;

      //  Add ISR to Trace
      ISRTrace[ISRTraceIndex] = 0x0066;
      ISRTraceIndex++; 

}     
#endif

//---------------------------------------------------------------------------
// SPI-A Default ISRs: 
//
// Connected to PIEIER6_1 (use MINT6 and MG61 masks):
#if (G61PL != 0)
interrupt void SPIRXINTA_ISR(void)    // SPI-A
{
	// Set interrupt priority:
	volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER6.all;
	IER |= M_INT6;
	IER	&= MINT6;	  	                // Set "global" priority
	PieCtrlRegs.PIEIER6.all &= MG61;   // Set "group"  priority	
	PieCtrlRegs.PIEACK.all = 0xFFFF;   // Enable PIE interrupts	
	EINT;

  	// Insert ISR Code here.......
  
  	
   for(i = 1; i <= 10; i++) {}

	// Restore registers saved:
	DINT;
	PieCtrlRegs.PIEIER6.all = TempPIEIER;

      //  Add ISR to Trace
      ISRTrace[ISRTraceIndex] = 0x0061;
      ISRTraceIndex++; 

}     
#endif

// Connected to PIEIER6_2 (use MINT6 and MG62 masks):
#if (G62PL != 0)
interrupt void SPITXINTA_ISR(void)     // SPI-A
{
	// Set interrupt priority:
	volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER6.all;
	IER |= M_INT6;
	IER	&= MINT6;	  	                // Set "global" priority
	PieCtrlRegs.PIEIER6.all &= MG62;   // Set "group"  priority	
	PieCtrlRegs.PIEACK.all = 0xFFFF;   // Enable PIE interrupts	
	EINT;

  	// Insert ISR Code here.......
  
  	
   for(i = 1; i <= 10; i++) {}

	// Restore registers saved:
	DINT;
	PieCtrlRegs.PIEIER6.all = TempPIEIER;

      //  Add ISR to Trace
      ISRTrace[ISRTraceIndex] = 0x0062;
      ISRTraceIndex++; 

}     
#endif

//---------------------------------------------------------------------------
// SCI-A Default ISRs: 
//
// Connected to PIEIER9_1 (use MINT9 and MG91 masks):
#if (G91PL != 0)
interrupt void SCIRXINTA_ISR(void)     // SCI-A
{
	// Set interrupt priority:
	volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER9.all;
	IER |= M_INT9;
	IER	&= MINT9;	  	                // Set "global" priority
	PieCtrlRegs.PIEIER9.all &= MG91;   // Set "group"  priority	
	PieCtrlRegs.PIEACK.all = 0xFFFF;   // Enable PIE interrupts	
	EINT;

  	// Insert ISR Code here.......
  
  	
   for(i = 1; i <= 10; i++) {}

	// Restore registers saved:
	DINT;
	PieCtrlRegs.PIEIER9.all = TempPIEIER;

      //  Add ISR to Trace
      ISRTrace[ISRTraceIndex] = 0x0091;
      ISRTraceIndex++; 

}     
#endif

// Connected to PIEIER9_2 (use MINT9 and MG92 masks):
#if (G92PL != 0)
interrupt void SCITXINTA_ISR(void)     // SCI-A
{
	// Set interrupt priority:
	volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER9.all;
	IER |= M_INT9;
	IER	&= MINT9;	  	                // Set "global" priority
	PieCtrlRegs.PIEIER9.all &= MG92;   // Set "group"  priority	
	PieCtrlRegs.PIEACK.all = 0xFFFF;   // Enable PIE interrupts	
	EINT;

  	// Insert ISR Code here.......
  
  	
   for(i = 1; i <= 10; i++) {}

	// Restore registers saved:
	DINT;
	PieCtrlRegs.PIEIER9.all = TempPIEIER;

      //  Add ISR to Trace
      ISRTrace[ISRTraceIndex] = 0x0092;
      ISRTraceIndex++; 

}     
#endif

//---------------------------------------------------------------------------
// SCI-B Default ISRs: 
//
// Connected to PIEIER9_3 (use MINT9 and MG93 masks):
#if (G93PL != 0)
interrupt void SCIRXINTB_ISR(void)     // SCI-B
{
	// Set interrupt priority:
	volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER9.all;
	IER |= M_INT9;
	IER	&= MINT9;	  	                // Set "global" priority
	PieCtrlRegs.PIEIER9.all &= MG93;   // Set "group"  priority	
	PieCtrlRegs.PIEACK.all = 0xFFFF;   // Enable PIE interrupts	
	EINT;

  	// Insert ISR Code here.......
  
  	
   for(i = 1; i <= 10; i++) {}

	// Restore registers saved:
	DINT;
	PieCtrlRegs.PIEIER9.all = TempPIEIER;

      //  Add ISR to Trace
      ISRTrace[ISRTraceIndex] = 0x0093;
      ISRTraceIndex++; 

}     
#endif

// Connected to PIEIER9_4 (use MINT9 and MG94 masks):
#if (G94PL != 0)
interrupt void SCITXINTB_ISR(void)     // SCI-B
{
	// Set interrupt priority:
	volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER9.all;
	IER |= M_INT9;
	IER	&= MINT9;	  	                // Set "global" priority
	PieCtrlRegs.PIEIER9.all &= MG94;   // Set "group"  priority	
	PieCtrlRegs.PIEACK.all = 0xFFFF;   // Enable PIE interrupts	
	EINT;

  	// Insert ISR Code here.......
  
  	
   for(i = 1; i <= 10; i++) {}

	// Restore registers saved:
	DINT;
	PieCtrlRegs.PIEIER9.all = TempPIEIER;

      //  Add ISR to Trace
      ISRTrace[ISRTraceIndex] = 0x0094;
      ISRTraceIndex++; 

}     
#endif
//---------------------------------------------------------------------------
// eCAN-A Default ISRs: 
//
// Connected to PIEIER9_5 (use MINT9 and MG95 masks):
#if (G95PL != 0)
interrupt void ECAN0INTA_ISR(void)  // eCAN-A
{
	// Set interrupt priority:
	volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER9.all;
	IER |= M_INT9;
	IER	&= MINT9;	  	                // Set "global" priority
	PieCtrlRegs.PIEIER9.all &= MG95;   // Set "group"  priority	
	PieCtrlRegs.PIEACK.all = 0xFFFF;   // Enable PIE interrupts	
	EINT;

  	// Insert ISR Code here.......
  
  	
   for(i = 1; i <= 10; i++) {}

	// Restore registers saved:
	DINT;
	PieCtrlRegs.PIEIER9.all = TempPIEIER;

      //  Add ISR to Trace
      ISRTrace[ISRTraceIndex] = 0x0095;
      ISRTraceIndex++; 

}     
#endif

// Connected to PIEIER9_6 (use MINT9 and MG96 masks):
#if (G96PL != 0)
interrupt void ECAN1INTA_ISR(void)  // eCAN-A
{
	// Set interrupt priority:
	volatile Uint16 TempPIEIER = PieCtrlRegs.PIEIER9.all;
	IER |= M_INT9;
	IER	&= MINT9;	  	                // Set "global" priority
	PieCtrlRegs.PIEIER9.all &= MG96;   // Set "group"  priority	
	PieCtrlRegs.PIEACK.all = 0xFFFF;   // Enable PIE interrupts	
	EINT;

  	// Insert ISR Code here.......
  
  	
     for(i = 1; i <= 10; i++) {}

	// Restore registers saved:
	DINT;
	PieCtrlRegs.PIEIER9.all = TempPIEIER;

      //  Add ISR to Trace
      ISRTrace[ISRTraceIndex] = 0x0096;
      ISRTraceIndex++; 

}     
#endif

//---------------------------------------------------------------------------
// Catch All Default ISRs: 
//

interrupt void PIE_RESERVED(void)    // Interrupt not used default.
{
   ESTOP0;
}

interrupt void INT_NOTUSED_ISR(void)    // Interrupt not used default.
{
   ESTOP0;
}

interrupt void rsvd_ISR(void)           // Interrupt reserved default.
{
   ESTOP0;
}

//===========================================================================
// No more.
//===========================================================================