⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 amiga.c

📁 压缩解压,是unzip540的升级,这个外国网站摘来的源码,是evb编写.
💻 C
📖 第 1 页 / 共 3 页
字号:
#ifndef OLD_AMIGA_RENAMED    G.renamed_fullpath = (renamed &&                          (*G.filename == '/' || *G.filename == ':'));#else    /* supress G.rootpath even when user gave a relative pathname */# if 1    G.renamed_fullpath = (renamed && strpbrk(G.filename, ":/");# else    G.renamed_fullpath = (renamed &&                          (strchr(G.filename, ':') || strchr(G.filename, '/')));# endif#endif    if (checkdir(__G__ (char *)NULL, INIT) == MPN_NOMEM)        return MPN_NOMEM;       /* initialize path buffer, unless no memory */    *pathcomp = '\0';           /* initialize translation buffer */    pp = pathcomp;              /* point to translation buffer */    if (uO.jflag)               /* junking directories */        cp = (char *)strrchr(G.filename, '/');    if (cp == (char *)NULL)     /* no '/' or not junking dirs */        cp = G.filename;        /* point to internal zipfile-member pathname */    else        ++cp;                   /* point to start of last component of path *//*---------------------------------------------------------------------------    Begin main loop through characters in filename.  ---------------------------------------------------------------------------*/    while ((workch = (uch)*cp++) != 0) {        switch (workch) {            case '/':             /* can assume -j flag not given */                *pp = '\0';                if (strcmp(pathcomp, ".") == 0) {                    /* don't bother appending "./" to the path */                    *pathcomp = '\0';                } else if (!uO.ddotflag && strcmp(pathcomp, "..") == 0) {                    /* "../" dir traversal detected, skip over it */                    *pathcomp = '\0';                    killed_ddot = TRUE;     /* set "show message" flag */                }                /* when path component is not empty, append it now */                if (*pathcomp != '\0' &&                    ((error = checkdir(__G__ pathcomp, APPEND_DIR))                     & MPN_MASK) > MPN_INF_TRUNC)                    return error;                pp = pathcomp;    /* reset conversion buffer for next piece */                lastsemi = (char *)NULL; /* leave direct. semi-colons alone */                break;            case ';':             /* VMS version (or DEC-20 attrib?) */                lastsemi = pp;         /* keep for now; remove VMS ";##" */                *pp++ = (char)workch;  /*  later, if requested */                break;            default:                /* allow ISO European characters in filenames: */                if (isprint(workch) || (160 <= workch && workch <= 255))                    *pp++ = (char)workch;        } /* end switch */    } /* end while loop */    /* Show warning when stripping insecure "parent dir" path components */    if (killed_ddot && QCOND2) {        Info(slide, 0, ((char *)slide,          "warning:  skipped \"../\" path component(s) in %s\n",          FnFilter1(G.filename)));        if (!(error & ~MPN_MASK))            error = (error & MPN_MASK) | PK_WARN;    }/*---------------------------------------------------------------------------    Report if directory was created (and no file to create:  filename ended    in '/'), check name to be sure it exists, and combine path and name be-    fore exiting.  ---------------------------------------------------------------------------*/    if (G.filename[strlen(G.filename) - 1] == '/') {        checkdir(__G__ G.filename, GETPATH);        if (G.created_dir) {            if (QCOND2) {                Info(slide, 0, ((char *)slide, "   creating: %s\n",                  FnFilter1(G.filename)));            }            /* set dir time (note trailing '/') */            return (error & ~MPN_MASK) | MPN_CREATED_DIR;        }        /* dir existed already; don't look for data to extract */        return (error & ~MPN_MASK) | MPN_INF_SKIP;    }    *pp = '\0';                   /* done with pathcomp:  terminate it */    /* if not saving them, remove VMS version numbers (appended ";###") */    if (!uO.V_flag && lastsemi) {        pp = lastsemi + 1;        while (isdigit((uch)(*pp)))            ++pp;        if (*pp == '\0')          /* only digits between ';' and end:  nuke */            *lastsemi = '\0';    }    if (*pathcomp == '\0') {        Info(slide, 1, ((char *)slide, "mapname:  conversion of %s failed\n",          FnFilter1(G.filename)));        return (error & ~MPN_MASK) | MPN_ERR_SKIP;    }    error = (error & ~MPN_MASK) | checkdir(__G__ pathcomp, APPEND_NAME);    if ((error & MPN_MASK) == MPN_INF_TRUNC) {        /* GRR:  OK if truncated here:  warn and continue */        /* (warn in checkdir?) */    }    checkdir(__G__ G.filename, GETPATH);    return error;} /* end function mapname() *//***********************//* Function checkdir() *//***********************/int checkdir(__G__ pathcomp, flag)    __GDEF    char *pathcomp;    int flag;/* * returns: *  MPN_OK          - no problem detected *  MPN_INF_TRUNC   - (on APPEND_NAME) truncated filename *  MPN_INF_SKIP    - path doesn't exist, not allowed to create *  MPN_ERR_SKIP    - path doesn't exist, tried to create and failed; or path *                    exists and is not a directory, but is supposed to be *  MPN_ERR_TOOLONG - path is too long *  MPN_NOMEM       - can't allocate memory for filename buffers */{/* these statics are now declared in SYSTEM_SPECIFIC_GLOBALS in amiga.h: *//*  static int rootlen = 0; */   /* length of rootpath *//*  static char *rootpath;  */   /* user's "extract-to" directory *//*  static char *buildpath; */   /* full path (so far) to extracted file *//*  static char *end;       */   /* pointer to end of buildpath ('\0') */#   define FN_MASK   7#   define FUNCTION  (flag & FN_MASK)/*---------------------------------------------------------------------------    APPEND_DIR:  append the path component to the path being built and check    for its existence.  If doesn't exist and we are creating directories, do    so for this one; else signal success or error as appropriate.  ---------------------------------------------------------------------------*//* GRR:  check path length after each segment:  warn about truncation */    if (FUNCTION == APPEND_DIR) {        int too_long = FALSE;        Trace((stderr, "appending dir segment [%s]\n", FnFilter1(pathcomp)));        while ((*G.build_end = *pathcomp++) != '\0')            ++G.build_end;        /* Truncate components over 30 chars? Nah, the filesystem handles it. */        if ((G.build_end-G.buildpath) > FILNAMSIZ-3)       /* room for "/a\0" */            too_long = TRUE;                    /* check if extracting dir? */        if (SSTAT(G.buildpath, &G.statbuf)) {   /* path doesn't exist */            if (!G.create_dirs) { /* told not to create (freshening) */                free(G.buildpath);                return MPN_INF_SKIP;    /* path doesn't exist: nothing to do */            }            if (too_long) {                Info(slide, 1, ((char *)slide,                  "checkdir error:  path too long: %s\n",                  FnFilter1(G.buildpath)));                free(G.buildpath);                /* no room for filenames:  fatal */                return MPN_ERR_TOOLONG;            }            if (MKDIR(G.buildpath, 0777) == -1) {   /* create the directory */                Info(slide, 1, ((char *)slide,                  "checkdir error:  cannot create %s\n\                 unable to process %s.\n",                  FnFilter2(G.buildpath), FnFilter1(G.filename)));                free(G.buildpath);                /* path didn't exist, tried to create, failed */                return MPN_ERR_SKIP;            }            G.created_dir = TRUE;        } else if (!S_ISDIR(G.statbuf.st_mode)) {            Info(slide, 1, ((char *)slide,              "checkdir error:  %s exists but is not directory\n\                 unable to process %s.\n",              FnFilter2(G.buildpath), FnFilter1(G.filename)));            free(G.buildpath);            /* path existed but wasn't dir */            return MPN_ERR_SKIP;        }        if (too_long) {            Info(slide, 1, ((char *)slide,              "checkdir error:  path too long: %s\n", FnFilter1(G.buildpath)));            free(G.buildpath);            /* no room for filenames:  fatal */            return MPN_ERR_TOOLONG;        }        *G.build_end++ = '/';        *G.build_end = '\0';        Trace((stderr, "buildpath now = [%s]\n", FnFilter1(G.buildpath)));        return MPN_OK;    } /* end if (FUNCTION == APPEND_DIR) *//*---------------------------------------------------------------------------    GETPATH:  copy full path to the string pointed at by pathcomp, and free    G.buildpath.  Not our responsibility to worry whether pathcomp has room.  ---------------------------------------------------------------------------*/    if (FUNCTION == GETPATH) {        strcpy(pathcomp, G.buildpath);        Trace((stderr, "getting and freeing path [%s]\n",          FnFilter1(pathcomp)));        free(G.buildpath);        G.buildpath = G.build_end = (char *)NULL;        return MPN_OK;    }/*---------------------------------------------------------------------------    APPEND_NAME:  assume the path component is the filename; append it and    return without checking for existence.  ---------------------------------------------------------------------------*/    if (FUNCTION == APPEND_NAME) {        Trace((stderr, "appending filename [%s]\n", FnFilter1(pathcomp)));        while ((*G.build_end = *pathcomp++) != '\0') {            ++G.build_end;            if ((G.build_end-G.buildpath) >= FILNAMSIZ) {                *--G.build_end = '\0';                Info(slide, 0x201, ((char *)slide,                  "checkdir warning:  path too long; truncating\n\                   %s\n                -> %s\n",                  FnFilter1(G.filename), FnFilter2(G.buildpath)));                return MPN_INF_TRUNC;   /* filename truncated */            }        }        Trace((stderr, "buildpath now = [%s]\n", FnFilter1(G.buildpath)));        /* could check for existence here, prompt for new name... */        return MPN_OK;    }/*---------------------------------------------------------------------------    INIT:  allocate and initialize buffer space for the file currently being    extracted.  If file was renamed with an absolute path, don't prepend the    extract-to path.  ---------------------------------------------------------------------------*/    if (FUNCTION == INIT) {        Trace((stderr, "initializing buildpath to "));        if ((G.buildpath = (char *)malloc(strlen(G.filename)+G.rootlen+1))            == (char *)NULL)            return MPN_NOMEM;        if ((G.rootlen > 0) && !G.renamed_fullpath) {            strcpy(G.buildpath, G.rootpath);            G.build_end = G.buildpath + G.rootlen;        } else {            *G.buildpath = '\0';            G.build_end = G.buildpath;        }        Trace((stderr, "[%s]\n", FnFilter1(G.buildpath)));        return MPN_OK;    }/*---------------------------------------------------------------------------    ROOT:  if appropriate, store the path in G.rootpath and create it if    necessary; else assume it's a zipfile member and return.  This path    segment gets used in extracting all members from every zipfile specified    on the command line.  ---------------------------------------------------------------------------*/#if (!defined(SFX) || defined(SFX_EXDIR))    if (FUNCTION == ROOT) {        Trace((stderr, "initializing root path to [%s]\n",          FnFilter1(pathcomp)));        if (pathcomp == (char *)NULL) {            G.rootlen = 0;            return MPN_OK;        }        if (G.rootlen > 0)      /* rootpath was already set, nothing to do */            return MPN_OK;        if ((G.rootlen = strlen(pathcomp)) > 0) {            if (stat(pathcomp, &G.statbuf) || !S_ISDIR(G.statbuf.st_mode)) {                /* path does not exist */                if (!G.create_dirs) {                    G.rootlen = 0;                    /* skip (or treat as stored file) */                    return MPN_INF_SKIP;                }                /* create the directory (could add loop here scanning pathcomp                 * to create more than one level, but why really necessary?) */                if (MKDIR(pathcomp, 0777) == -1) {                    Info(slide, 1, ((char *)slide,                      "checkdir:  cannot create extraction directory: %s\n",                      FnFilter1(pathcomp)));                    G.rootlen = 0;                    /* path didn't exist, tried to create, and failed: */                    /* file exists, or 2+ subdir levels required */                    return MPN_ERR_SKIP;                }            }            if ((G.rootpath = (char *)malloc(G.rootlen+2)) == NULL) {                G.rootlen = 0;                return MPN_NOMEM;            }            strcpy(G.rootpath, pathcomp);            if (G.rootpath[G.rootlen-1] != ':' && G.rootpath[G.rootlen-1] != '/')                G.rootpath[G.rootlen++] = '/';            G.rootpath[G.rootlen] = '\0';            Trace((stderr, "rootpath now = [%s]\n", FnFilter1(G.rootpath)));        }        return MPN_OK;    }#endif /* !SFX || SFX_EXDIR *//*---------------------------------------------------------------------------    END:  free G.rootpath, immediately prior to program exit.  ---------------------------------------------------------------------------*/    if (FUNCTION == END) {        Trace((stderr, "freeing rootpath\n"));        if (G.rootlen > 0) {            free(G.rootpath);            G.rootlen = 0;        }        return MPN_OK;    }    return MPN_INVALID; /* should never reach */} /* end function checkdir() */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -