netevent.h

来自「书中的主要程序文件。在打开例题的.dsw文件后,请读者在 tools菜单下」· C头文件 代码 · 共 2,666 行 · 第 1/5 页

//
// MessageText:
//
//  Received %2 packet(s) in the clear from %3 which should have been secured.
//  This could be a temporary glitch; if it persists please stop and restart the IPSec Policy Agent service on this machine.
//
#define EVENT_IPSEC_UNEXPECTED_CLEARTEXT 0xC00010BCL

//
// MessageId: EVENT_IPSEC_AUTH_FAILURE
//
// MessageText:
//
//  Failed to authenticate the hash for %2 packet(s) received from %3.
//  This could be a temporary glitch; if it persists please stop and restart the IPSec Policy Agent service on this machine.
//
#define EVENT_IPSEC_AUTH_FAILURE         0xC00010BDL

//
// MessageId: EVENT_IPSEC_BAD_PACKET_SYNTAX
//
// MessageText:
//
//  Received %2 packet(s) from %3 with invalid packet syntax.
//  This could be a temporary glitch; if it persists please stop and restart the IPSec Policy Agent service on this machine.
//
#define EVENT_IPSEC_BAD_PACKET_SYNTAX    0xC00010BEL

//
// MessageId: EVENT_IPSEC_BAD_PROTOCOL_RECEIVED
//
// MessageText:
//
//  Received %2 packet(s) from %3 with inproper protocol identifier.
//  This could be a temporary glitch; if it persists please stop and restart the IPSec Policy Agent service on this machine.
//
#define EVENT_IPSEC_BAD_PROTOCOL_RECEIVED 0xC00010BFL

//
// MessageId: EVENT_IPSEC_GENERIC_FAILURE
//
// MessageText:
//
//  Received %2 packet(s) from %3 that failed the IPSec processing for an unknown reason.
//  This could be a temporary glitch; if it persists please stop and restart the IPSec Policy Agent service on this machine..
//
#define EVENT_IPSEC_GENERIC_FAILURE      0xC00010C0L

//
// MessageId: EVENT_IPSEC_NEG_FAILURE
//
// MessageText:
//
//  The IPSec driver failed the oakley negotiation with %2 since no filter
//  exists to protect packets to that destination.
//  Please check the configuration on this machine to ensure at least one
//  filter matches the destination.
//
#define EVENT_IPSEC_NEG_FAILURE          0xC00010C1L



/////////////////////////////////////////////////////////////////////////
//
// NBT Events
//
// Codes 4300 - 4399
//
/////////////////////////////////////////////////////////////////////////



// Don't use %1 for driver supplied insertion strings.  The IO subsystem
// supplies the first string!!

//
// MessageId: EVENT_NBT_CREATE_DRIVER
//
// MessageText:
//
//  The driver could not be created.
//
#define EVENT_NBT_CREATE_DRIVER          0xC00010CCL

//
// MessageId: EVENT_NBT_OPEN_REG_PARAMS
//
// MessageText:
//
//  Unable to open the Registry Parameters to read configuration information.
//
#define EVENT_NBT_OPEN_REG_PARAMS        0xC00010CDL

//
// MessageId: EVENT_NBT_NO_BACKUP_WINS
//
// MessageText:
//
//  The backup WINS server address is not configured in the registry.
//
#define EVENT_NBT_NO_BACKUP_WINS         0x800010CEL

//
// MessageId: EVENT_NBT_NO_WINS
//
// MessageText:
//
//  The primary WINS server address is not configured in the registry.
//
#define EVENT_NBT_NO_WINS                0x800010CFL

//
// MessageId: EVENT_NBT_BAD_BACKUP_WINS_ADDR
//
// MessageText:
//
//  The backup WINS server address is not formated correctly in the registry.
//
#define EVENT_NBT_BAD_BACKUP_WINS_ADDR   0x800010D0L

//
// MessageId: EVENT_NBT_BAD_PRIMARY_WINS_ADDR
//
// MessageText:
//
//  The primary WINS server address is not formated correctly in the registry.
//
#define EVENT_NBT_BAD_PRIMARY_WINS_ADDR  0x800010D1L

//
// MessageId: EVENT_NBT_NAME_SERVER_ADDRS
//
// MessageText:
//
//  Unable to configure the addresses of the WINS servers.
//
#define EVENT_NBT_NAME_SERVER_ADDRS      0xC00010D2L

//
// MessageId: EVENT_NBT_CREATE_ADDRESS
//
// MessageText:
//
//  Initialization failed because the transport refused to open initial Addresses.
//
#define EVENT_NBT_CREATE_ADDRESS         0xC00010D3L

//
// MessageId: EVENT_NBT_CREATE_CONNECTION
//
// MessageText:
//
//  Initialization failed because the transport refused to open initial Connections.
//
#define EVENT_NBT_CREATE_CONNECTION      0xC00010D4L

//
// MessageId: EVENT_NBT_NON_OS_INIT
//
// MessageText:
//
//  Data structure initialization failed.
//
#define EVENT_NBT_NON_OS_INIT            0xC00010D5L

//
// MessageId: EVENT_NBT_TIMERS
//
// MessageText:
//
//  Initialization failed because the timers could not be started.
//
#define EVENT_NBT_TIMERS                 0xC00010D6L

//
// MessageId: EVENT_NBT_CREATE_DEVICE
//
// MessageText:
//
//  Initialization failed because the driver device could not be created.
//
#define EVENT_NBT_CREATE_DEVICE          0xC00010D7L

//
// MessageId: EVENT_NBT_NO_DEVICES
//
// MessageText:
//
//  There are no adapters configured for this protocol stack.
//
#define EVENT_NBT_NO_DEVICES             0x800010D8L

//
// MessageId: EVENT_NBT_OPEN_REG_LINKAGE
//
// MessageText:
//
//  Unable to open the Registry Linkage to read configuration information.
//
#define EVENT_NBT_OPEN_REG_LINKAGE       0xC00010D9L

//
// MessageId: EVENT_NBT_READ_BIND
//
// MessageText:
//
//  Unable to read the driver's bindings to the transport from the registry.
//
#define EVENT_NBT_READ_BIND              0xC00010DAL

//
// MessageId: EVENT_NBT_READ_EXPORT
//
// MessageText:
//
//  Unable to read the driver's exported linkage configuration information.
//
#define EVENT_NBT_READ_EXPORT            0xC00010DBL

//
// MessageId: EVENT_NBT_OPEN_REG_NAMESERVER
//
// MessageText:
//
//  Unable to open the Registry to read the WINS server addresses.
//
#define EVENT_NBT_OPEN_REG_NAMESERVER    0x800010DCL

//
// MessageId: EVENT_SCOPE_LABEL_TOO_LONG
//
// MessageText:
//
//  The Netbios Name Scope has a component longer than 63 characters. Each label
//  in the Scope cannot be longer than 63 bytes.  Use the Control Panel, Network
//  applet to change the scope.
//
#define EVENT_SCOPE_LABEL_TOO_LONG       0x800010DDL

//
// MessageId: EVENT_SCOPE_TOO_LONG
//
// MessageText:
//
//  The Netbios Name Scope is too long. The scope cannot be longer than
//  255 bytes. Use the Control Panel, Network applet to change the scope.
//
#define EVENT_SCOPE_TOO_LONG             0x800010DEL

//
// MessageId: EVENT_NBT_DUPLICATE_NAME
//
// MessageText:
//
//  A duplicate name has been detected on the TCP network.  The IP address of
//  the machine that sent the message is in the data. Use nbtstat -n in a
//  command window to see which name is in the Conflict state.
//
#define EVENT_NBT_DUPLICATE_NAME         0xC00010DFL

//
// MessageId: EVENT_NBT_NAME_RELEASE
//
// MessageText:
//
//  Another machine has sent a name release message to this machine probably
//  because a duplicate name has been detected on the TCP network.  The IP address
//  of the node that sent the message is in the data. Use nbtstat -n in a
//  command window to see which name is in the Conflict state.
//
#define EVENT_NBT_NAME_RELEASE           0xC00010E0L


/////////////////////////////////////////////////////////////////////////
//
// NDIS Environment Events
//
// Codes 5000 - 5099
//
/////////////////////////////////////////////////////////////////////////


//
// MessageId: EVENT_NDIS_RESOURCE_CONFLICT
//
// MessageText:
//
//  %2 : Has encountered a conflict in resources and could not load.
//
#define EVENT_NDIS_RESOURCE_CONFLICT     0xC0001388L

//
// MessageId: EVENT_NDIS_OUT_OF_RESOURCE
//
// MessageText:
//
//  %2 : Could not allocate the resources necessary for operation.
//
#define EVENT_NDIS_OUT_OF_RESOURCE       0xC0001389L

//
// MessageId: EVENT_NDIS_HARDWARE_FAILURE
//
// MessageText:
//
//  %2 : Has determined that the adapter is not functioning properly.
//
#define EVENT_NDIS_HARDWARE_FAILURE      0xC000138AL

//
// MessageId: EVENT_NDIS_ADAPTER_NOT_FOUND
//
// MessageText:
//
//  %2 : Could not find an adapter.
//
#define EVENT_NDIS_ADAPTER_NOT_FOUND     0xC000138BL

//
// MessageId: EVENT_NDIS_INTERRUPT_CONNECT
//
// MessageText:
//
//  %2 : Could not connect to the interrupt number supplied.
//
#define EVENT_NDIS_INTERRUPT_CONNECT     0xC000138CL

//
// MessageId: EVENT_NDIS_DRIVER_FAILURE
//
// MessageText:
//
//  %2 : Has encountered an internal error and has failed.
//
#define EVENT_NDIS_DRIVER_FAILURE        0xC000138DL

//
// MessageId: EVENT_NDIS_BAD_VERSION
//
// MessageText:
//
//  %2 : The version number is incorrect for this driver.
//
#define EVENT_NDIS_BAD_VERSION           0xC000138EL

//
// MessageId: EVENT_NDIS_TIMEOUT
//
// MessageText:
//
//  %2 : Timed out during an operation.
//
#define EVENT_NDIS_TIMEOUT               0x8000138FL

//
// MessageId: EVENT_NDIS_NETWORK_ADDRESS
//
// MessageText:
//
//  %2 : Has encountered an invalid network address.
//
#define EVENT_NDIS_NETWORK_ADDRESS       0xC0001390L

//
// MessageId: EVENT_NDIS_UNSUPPORTED_CONFIGURATION
//
// MessageText:
//
//  %2 : Does not support the configuration supplied.
//
#define EVENT_NDIS_UNSUPPORTED_CONFIGURATION 0xC0001391L

//
// MessageId: EVENT_NDIS_INVALID_VALUE_FROM_ADAPTER
//
// MessageText:
//
//  %2 : The adapter has returned an invalid value to the driver.
//
#define EVENT_NDIS_INVALID_VALUE_FROM_ADAPTER 0xC0001392L

//
// MessageId: EVENT_NDIS_MISSING_CONFIGURATION_PARAMETER
//
// MessageText:
//
//  %2 : A required parameter is missing from the Registry.
//
#define EVENT_NDIS_MISSING_CONFIGURATION_PARAMETER 0xC0001393L

//
// MessageId: EVENT_NDIS_BAD_IO_BASE_ADDRESS
//
// MessageText:
//
//  %2 : The I/O base address supplied does not match the jumpers on the adapter.
//
#define EVENT_NDIS_BAD_IO_BASE_ADDRESS   0xC0001394L

//
// MessageId: EVENT_NDIS_RECEIVE_SPACE_SMALL
//
// MessageText:
//
//  %2 : The adapter is configured such that the receive space is smaller than
//  the maximum packet size.  Some packets may be lost.
//
#define EVENT_NDIS_RECEIVE_SPACE_SMALL   0x40001395L

//
// MessageId: EVENT_NDIS_ADAPTER_DISABLED
//
// MessageText:
//
//  %2 : The adapter is disabled.  The driver cannot open the adapter.
//
#define EVENT_NDIS_ADAPTER_DISABLED      0x80001396L

//
// MessageId: EVENT_NDIS_IO_PORT_CONFLICT
//
// MessageText:
//
//  %2 : There is an I/O port conflict.
//
#define EVENT_NDIS_IO_PORT_CONFLICT      0x80001397L

//
// MessageId: EVENT_NDIS_PORT_OR_DMA_CONFLICT
//
// MessageText:
//
//  %2 : There is an I/O port or DMA channel conflict.
//
#define EVENT_NDIS_PORT_OR_DMA_CONFLICT  0x80001398L

//
// MessageId: EVENT_NDIS_MEMORY_CONFLICT
//
// MessageText:
//
//  %2 : There is a memory conflict at address 0x%3.
//
#define EVENT_NDIS_MEMORY_CONFLICT       0x80001399L

//
// MessageId: EVENT_NDIS_INTERRUPT_CONFLICT
//
// MessageText:
//
//  %2 : There is a interrupt conflict at interrupt number %3.
//
#define EVENT_NDIS_INTERRUPT_CONFLICT    0x8000139AL

//
// MessageId: EVENT_NDIS_DMA_CONFLICT
//
// MessageText:
//
//  %2 : There is a resource conflict at DMA channel %3.
//
#define EVENT_NDIS_DMA_CONFLICT          0x8000139BL

//
// MessageId: EVENT_NDIS_INVALID_DOWNLOAD_FILE_ERROR
//
// MessageText:
//
//  %2 : The download file is invalid.  The driver is unable to load.
//
#define EVENT_NDIS_INVALID_DOWNLOAD_FILE_ERROR 0xC000139CL

//
// MessageId: EVENT_NDIS_MAXRECEIVES_ERROR
//
// MessageText:
//
//  %2 : The specified Registry entry MaxReceives is out of range.  Using
//  default value.
//
#define EVENT_NDIS_MAXRECEIVES_ERROR     0x8000139DL

//
// MessageId: EVENT_NDIS_MAXTRANSMITS_ERROR
//
// MessageText:
//
//  %2 : The specified Registry entry MaxTransmits is out of range.  Using
//  default value.
//
#define EVENT_NDIS_MAXTRANSMITS_ERROR    0x8000139EL

//
// MessageId: EVENT_NDIS_MAXFRAMESIZE_ERROR
//
// MessageText:
//
//  %2 : The specified Registry entry MaxFrameSize is out of range.  Using
//  default value.
//
#define EVENT_NDIS_MAXFRAMESIZE_ERROR    0x8000139FL

//
// MessageId: EVENT_NDIS_MAXINTERNALBUFS_ERROR
//
// MessageText:
//
//  %2 : The specified Registry entry MaxInternalBufs is out of range.  Using
//  default value.
//
#define EVENT_NDIS_MAXINTERNALBUFS_ERROR 0x800013A0L

//
// MessageId: EVENT_NDIS_MAXMULTICAST_ERROR
//
// MessageText:
//
//  %2 : The specified Registry entry MaxMulticast is out of range.  Using
//  default value.
//
#define EVENT_NDIS_MAXMULTICAST_ERROR    0x800013A1L

//
// MessageId: EVENT_NDIS_PRODUCTID_ERROR
//
// MessageText:
//
//  %2 : The specified Registry entry ProductId is out of range.  Using
//  default value.
//
#define EVENT_NDIS_PRODUCTID_ERROR       0x800013A2L

//
// MessageId: EVENT_NDIS_LOBE_FAILUE_ERROR