📄 data_manage.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.2 07/10/2002
-- Compiled: 09/17/2004 15:54:06
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "data_manage"
BEGIN
DEVICE = "EP1K10TC100-1";
"CLK50M" : INPUT_PIN = 39 ;
"DATA4" : INPUT_PIN = 91 ;
"DATA5" : INPUT_PIN = 89 ;
"DATA6" : INPUT_PIN = 68 ;
"DATA7" : INPUT_PIN = 85 ;
"DATA12" : INPUT_PIN = 81 ;
"DATA13" : INPUT_PIN = 87 ;
"DATA14" : INPUT_PIN = 48 ;
"DATA15" : INPUT_PIN = 86 ;
"DATA20" : INPUT_PIN = 78 ;
"DATA21" : INPUT_PIN = 49 ;
"DATA22" : INPUT_PIN = 82 ;
"DATA23" : INPUT_PIN = 45 ;
"MCU_CLK" : INPUT_PIN = 90 ;
"MCU_DATA" : INPUT_PIN = 56 ;
"MCU_LATCH" : INPUT_PIN = 40 ;
"VS" : INPUT_PIN = 38 ;
"ADDR0" : OUTPUT_PIN = 15 ;
"ADDR1" : OUTPUT_PIN = 84 ;
"ADDR2" : OUTPUT_PIN = 62 ;
"ADDR3" : OUTPUT_PIN = 46 ;
"ADDR4" : OUTPUT_PIN = 14 ;
"ADDR5" : OUTPUT_PIN = 13 ;
"ADDR6" : OUTPUT_PIN = 16 ;
"ADDR7" : OUTPUT_PIN = 64 ;
"ADDR8" : OUTPUT_PIN = 47 ;
"ADDR9" : OUTPUT_PIN = 63 ;
"ADDR10" : OUTPUT_PIN = 61 ;
"ADDR11" : OUTPUT_PIN = 50 ;
"ADDR12" : OUTPUT_PIN = 77 ;
"ADDR13" : OUTPUT_PIN = 22 ;
"BDATA0" : OUTPUT_PIN = 70 ;
"BDATA1" : OUTPUT_PIN = 98 ;
"BDATA2" : OUTPUT_PIN = 97 ;
"BDATA3" : OUTPUT_PIN = 7 ;
"CLK_OUT" : OUTPUT_PIN = 79 ;
"EN" : OUTPUT_PIN = 20 ;
"GDATA0" : OUTPUT_PIN = 43 ;
"GDATA1" : OUTPUT_PIN = 10 ;
"GDATA2" : OUTPUT_PIN = 8 ;
"GDATA3" : OUTPUT_PIN = 6 ;
"LATCH_OUT" : OUTPUT_PIN = 65 ;
"OE" : OUTPUT_PIN = 55 ;
"RDATA0" : OUTPUT_PIN = 71 ;
"RDATA1" : OUTPUT_PIN = 69 ;
"RDATA2" : OUTPUT_PIN = 5 ;
"RDATA3" : OUTPUT_PIN = 9 ;
"WE" : OUTPUT_PIN = 58 ;
"|LPM_ADD_SUB:1119|addcore:adder|:63" : LOCATION = LC4_B7 ;
"|LPM_ADD_SUB:1119|addcore:adder|:67" : LOCATION = LC5_B7 ;
"|LPM_ADD_SUB:1119|addcore:adder|:71" : LOCATION = LC6_B7 ;
"|LPM_ADD_SUB:1119|addcore:adder|:75" : LOCATION = LC3_B7 ;
"|LPM_ADD_SUB:1288|addcore:adder|:63" : LOCATION = LC7_A8 ;
":49" : LOCATION = LC7_A23;
":51" : LOCATION = LC1_A18;
":53" : LOCATION = LC5_A6 ;
":55" : LOCATION = LC1_A6 ;
":57" : LOCATION = LC2_A18;
":59" : LOCATION = LC5_A18;
":61" : LOCATION = LC7_A18;
":63" : LOCATION = LC5_A12;
":65" : LOCATION = LC3_A23;
":67" : LOCATION = LC8_A23;
":69" : LOCATION = LC1_A23;
":71" : LOCATION = LC3_A3 ;
":73" : LOCATION = LC2_C20; -- CONTROL_B7
":74" : LOCATION = LC5_C20; -- CONTROL_B6
":75" : LOCATION = LC4_C20; -- CONTROL_B5
":76" : LOCATION = LC3_C20; -- CONTROL_B4
":77" : LOCATION = LC1_C22; -- CONTROL_B3
":78" : LOCATION = LC1_C13; -- CONTROL_B2
":79" : LOCATION = LC4_C13; -- CONTROL_B1
":80" : LOCATION = LC3_C13; -- CONTROL_B0
":81" : LOCATION = LC4_C22; -- CONTROL_T7
":82" : LOCATION = LC6_C20; -- CONTROL_T6
":83" : LOCATION = LC7_C20; -- CONTROL_T5
":84" : LOCATION = LC8_C20; -- CONTROL_T4
":85" : LOCATION = LC3_C22; -- CONTROL_T3
":86" : LOCATION = LC5_C13; -- CONTROL_T2
":87" : LOCATION = LC6_C13; -- CONTROL_T1
":88" : LOCATION = LC7_C13; -- CONTROL_T0
":89" : LOCATION = LC6_A4 ; -- CLK_COUNTER2
":90" : LOCATION = LC5_A4 ; -- CLK_COUNTER1
":91" : LOCATION = LC4_A4 ; -- CLK_COUNTER0
":92" : LOCATION = LC8_B1 ; -- CHUNNEL_COUNTER1
"~92~1" : LOCATION = LC6_B1 ; -- CHUNNEL_COUNTER1~1
":93" : LOCATION = LC1_B1 ; -- CHUNNEL_COUNTER0
":95" : LOCATION = LC6_B6 ; -- SECT_COUNTER2
":96" : LOCATION = LC5_B6 ; -- SECT_COUNTER1
":97" : LOCATION = LC8_B6 ; -- SECT_COUNTER0
":99" : LOCATION = LC8_B9 ; -- L_COUNTER1
":100" : LOCATION = LC4_B9 ; -- L_COUNTER0
":102" : LOCATION = LC7_B9 ; -- BLOCK_COUNTER5
":103" : LOCATION = LC2_B7 ; -- BLOCK_COUNTER4
":104" : LOCATION = LC7_B7 ; -- BLOCK_COUNTER3
":105" : LOCATION = LC1_B7 ; -- BLOCK_COUNTER2
":106" : LOCATION = LC3_B9 ; -- BLOCK_COUNTER1
":107" : LOCATION = LC6_B9 ; -- BLOCK_COUNTER0
":109" : LOCATION = LC3_A8 ; -- SCAN_COUNTER4
":110" : LOCATION = LC8_A8 ; -- SCAN_COUNTER3
":111" : LOCATION = LC6_A8 ; -- SCAN_COUNTER2
":112" : LOCATION = LC4_A8 ; -- SCAN_COUNTER1
":113" : LOCATION = LC1_A8 ; -- SCAN_COUNTER0
":115" : LOCATION = LC6_A23; -- R_BIT3
":116" : LOCATION = LC6_A6 ; -- R_BIT2
":117" : LOCATION = LC8_A6 ; -- R_BIT1
":118" : LOCATION = LC7_A6 ; -- R_BIT0
":119" : LOCATION = LC5_A23; -- B_BIT3
":120" : LOCATION = LC4_A23; -- B_BIT2
":121" : LOCATION = LC2_A23; -- B_BIT1
":122" : LOCATION = LC8_A3 ; -- B_BIT0
":123" : LOCATION = LC6_A18; -- G_BIT3
":124" : LOCATION = LC4_A18; -- G_BIT2
":125" : LOCATION = LC3_A18; -- G_BIT1
":126" : LOCATION = LC2_A12; -- G_BIT0
"~1190~1" : LOCATION = LC2_B9 ;
":1410" : LOCATION = LC3_A4 ;
"~1974~1" : LOCATION = LC2_A4 ;
":2204" : LOCATION = LC1_A4 ;
":2226" : LOCATION = LC2_B1 ;
":2246" : LOCATION = LC3_B6 ;
":2265" : LOCATION = LC1_B9 ;
":2288" : LOCATION = LC5_A8 ;
":2339" : LOCATION = LC2_A6 ;
":2345" : LOCATION = LC3_A6 ;
":2351" : LOCATION = LC4_A6 ;
":2398" : LOCATION = LC1_A12;
":2404" : LOCATION = LC3_A12;
":2410" : LOCATION = LC4_A12;
":2457" : LOCATION = LC2_A8 ;
":2463" : LOCATION = LC1_A3 ;
":2469" : LOCATION = LC2_A3 ;
":2507" : LOCATION = LC1_B6 ;
"~2507~1" : LOCATION = LC8_B7 ;
"~2507~2" : LOCATION = LC5_B9 ;
"~2507~3" : LOCATION = LC2_B6 ;
":2521" : LOCATION = LC2_C22;
"~2521~1" : LOCATION = LC2_C13;
"~2521~2" : LOCATION = LC1_C20;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -