usbin.c

2440超级bios（ads1.2 rvds2.2）通用

/****************************************************************
 NAME: usbin.c
 DESC: usb bulk-IN operation
 HISTORY:
 Mar.25.2002:purnnamu: ported for S3C2410X.
 ****************************************************************/
#include "Includes.h"

static void PrintEpiPkt(U08 *pt,int cnt);
// ===================================================================
// All following commands will operate in case 
// - in_csr1 is valid.
// ===================================================================

#define SET_EP1_IN_PKT_READY()  rIN_CSR1_REG= ( in_csr1 &(~ EPI_WR_BITS)\
					| EPI_IN_PKT_READY )	 
#define SET_EP1_SEND_STALL()	rIN_CSR1_REG= ( in_csr1 & (~EPI_WR_BITS)\
					| EPI_SEND_STALL) )
#define CLR_EP1_SENT_STALL()	rIN_CSR1_REG= ( in_csr1 & (~EPI_WR_BITS)\
					&(~EPI_SENT_STALL) )
#define FLUSH_EP1_FIFO() 	rIN_CSR1_REG= ( in_csr1 & (~EPI_WR_BITS)\
					| EPI_FIFO_FLUSH) )

// ***************************
// *** VERY IMPORTANT NOTE ***
// ***************************
// Prepare the code for the packit size constraint!!!
// EP1 = IN end point. 

U08 ep1Buf[EP1_PKT_SIZE];
int transferIndex = 0;

void PrepareEp1Fifo(void) 
{
    int i;
    U08 in_csr1;
    
    rINDEX_REG = 1;
    in_csr1 = rIN_CSR1_REG;    
    for(i=0; i<EP1_PKT_SIZE; i++)
    	ep1Buf[i] = (U08)(transferIndex+i);
    WrPktEp1(ep1Buf,EP1_PKT_SIZE);
    SET_EP1_IN_PKT_READY();
}
void Ep1Handler(void)
{
    U08 in_csr1;
    int i;
    rINDEX_REG=1;
    in_csr1=rIN_CSR1_REG;
    
    DbgPrintf("<1:%x]",in_csr1);
    //I think that EPI_SENT_STALL will not be set to 1.
    if(in_csr1 & EPI_SENT_STALL)
    {
	   	DbgPrintf("[STALL]");
   		CLR_EP1_SENT_STALL();
	   	return;
    }	
    //IN_PKT_READY is cleared
    //The data transfered was ep1Buf[] which was already configured 
    PrintEpiPkt(ep1Buf,EP1_PKT_SIZE); 
    transferIndex++;
    PrepareEp1Fifo(); 
    //IN_PKT_READY is set   
    //This packit will be used for next IN packit.	

    return;
}    
void PrintEpiPkt(U08 *pt,int cnt)
{
    int i;
    DbgPrintf("[B_IN:%d:",cnt);
    for(i=0;i<cnt;i++)
    	DbgPrintf("%x,",pt[i]);
    DbgPrintf("]");
}