motortest_opt.bak

串口控制8路舵机程序,本程序适用于III型实验板

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.s*; *.src; *.a*)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt; *.h; *.inc)
 pExt (*.plm)
 CppX (*.cpp)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (MotorTest), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(MotorMain),1,0,0
GRPOPT 2,(Series),1,0,0
GRPOPT 3,(LedDigital),1,0,0
GRPOPT 4,(Motor),1,0,0

OPTFFF 1,1,1,1291845635,0,117,136,0,<.\MotorTest.c><MotorTest.c> { 44,0,0,0,2,0,0,0,3,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,53,0,0,0,109,0,0,0,9,3,0,0,174,1,0,0 }
OPTFFF 2,2,1,134217729,0,1,1,0,<.\Series\Series.c><Series.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,0,0,0,0,0,0,0,0,212,2,0,0,65,1,0,0 }
OPTFFF 3,3,1,369098752,0,17,17,0,<.\LedDigital\LedDigital.c><LedDigital.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,254,255,255,255,250,255,255,255,210,2,0,0,59,1,0,0 }
OPTFFF 4,4,1,285212673,0,1,2,0,<.\Motor\Motor.c><Motor.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,24,0,0,0,169,0,0,0,236,2,0,0,234,1,0,0 }

ExtF <.\MotorTest.h> 1,13,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,21,0,0,0,1,0,0,0,237,2,0,0,67,1,0,0 }

TARGOPT 1, (MotorTest)
 CLK51=22118400
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTBL 0,(Data Sheet)<DATASHTS\ATMEL\DOC0851.PDF>
  OPTBL 1,(Add on databooks)<DATASHTS\ADDBOOKS.PDF>
  OPTBL 2,(Instruction Set Manual)<DATASHTS\ATMEL\DOC0509.PDF>
  OPTDL (S8051.DLL)()(DP51.DLL)(-pAT52)(S8051.DLL)()(TP51.DLL)(-pAT52)
  OPTDBG 44029,0,()()()()()()()()()() ()()()()
  OPTDF 0x2
  OPTLE <>
  OPTLC <>
EndOpt