wincomm.fi

来自「开放源码的编译器open watcom 1.6.0版的源代码」· FI 代码 · 共 246 行

*$noreference

! Communication Functions:
! ------------------------

      external BuildCommDCB
      external ClearCommBreak
      external CloseComm
      external EscapeCommFunction
      external FlushComm
      external GetCommError
      external GetCommEventMask
      external GetCommState
      external OpenComm
      external ReadComm
      external SetCommBreak
      external SetCommEventMask
      external SetCommState
      external TransmitCommChar
      external UngetCommChar
      external WriteComm

      integer*2 BuildCommDCB
      integer*2 ClearCommBreak
      integer*2 CloseComm
      integer*2 EscapeCommFunction
      integer*2 FlushComm
      integer*2 GetCommError
      integer*2 GetCommEventMask
      integer*2 GetCommState
      integer*2 OpenComm
      integer*2 ReadComm
      integer*2 SetCommBreak
      integer*4 SetCommEventMask
      integer*2 SetCommState
      integer*2 TransmitCommChar
      integer*2 UngetCommChar
      integer*2 WriteComm

! Event masks for SetCommEventMask()

      integer EV_RXCHAR
      integer EV_RXFLAG
      integer EV_TXEMPTY
      integer EV_CTS
      integer EV_DSR
      integer EV_RLSD
      integer EV_BREAK
      integer EV_ERR
      integer EV_RING
      integer EV_PERR

      parameter ( EV_RXCHAR           = '0001'x )  ! Any Character received
      parameter ( EV_RXFLAG           = '0002'x )  ! Received certain character
      parameter ( EV_TXEMPTY          = '0004'x )  ! Transmitt Queue Empty
      parameter ( EV_CTS              = '0008'x )  ! CTS changed state
      parameter ( EV_DSR              = '0010'x )  ! DSR changed state
      parameter ( EV_RLSD             = '0020'x )  ! RLSD changed state
      parameter ( EV_BREAK            = '0040'x )  ! BREAK received
      parameter ( EV_ERR              = '0080'x )  ! Line status error occurred
      parameter ( EV_RING             = '0100'x )  ! Ring signal detected
      parameter ( EV_PERR             = '0200'x )  ! Printer error occured

! SetCommFunction() Codes

      integer SETXOFF
      integer SETXON
      integer SETRTS
      integer CLRRTS
      integer SETDTR
      integer CLRDTR
      integer RESETDEV

      parameter ( SETXOFF             = 1 )      ! Simulate XOFF received
      parameter ( SETXON              = 2 )      ! Simulate XON received
      parameter ( SETRTS              = 3 )      ! Set RTS high
      parameter ( CLRRTS              = 4 )      ! Set RTS low
      parameter ( SETDTR              = 5 )      ! Set DTR high
      parameter ( CLRDTR              = 6 )      ! Set DTR low
      parameter ( RESETDEV            = 7 )      ! Reset device if possible

! GetCommError() Flags

      integer CE_RXOVER
      integer CE_OVERRUN
      integer CE_RXPARITY
      integer CE_FRAME
      integer CE_BREAK
      integer CE_CTSTO
      integer CE_DSRTO
      integer CE_RLSDTO
      integer CE_TXFULL
      integer CE_PTO
      integer CE_IOE
      integer CE_DNS
      integer CE_OOP
      integer CE_MODE

      parameter ( CE_RXOVER           = '0001'x )  ! Receive Queue overflow
      parameter ( CE_OVERRUN          = '0002'x )  ! Receive Overrun Error
      parameter ( CE_RXPARITY         = '0004'x )  ! Receive Parity Error
      parameter ( CE_FRAME            = '0008'x )  ! Receive Framing error
      parameter ( CE_BREAK            = '0010'x )  ! Break Detected
      parameter ( CE_CTSTO            = '0020'x )  ! CTS Timeout
      parameter ( CE_DSRTO            = '0040'x )  ! DSR Timeout
      parameter ( CE_RLSDTO           = '0080'x )  ! RLSD Timeout
      parameter ( CE_TXFULL           = '0100'x )  ! TX Queue is full
      parameter ( CE_PTO              = '0200'x )  ! LPTx Timeout
      parameter ( CE_IOE              = '0400'x )  ! LPTx I/O Error
      parameter ( CE_DNS              = '0800'x )  ! LPTx Device not selected
      parameter ( CE_OOP              = '1000'x )  ! LPTx Out-Of-Paper
      parameter ( CE_MODE             = '8000'x )  ! Requested mode unsupported

! OpenComm() return codes

      integer IE_BADID
      integer IE_OPEN
      integer IE_NOPEN
      integer IE_MEMORY
      integer IE_DEFAULT
      integer IE_HARDWARE
      integer IE_BYTESIZE
      integer IE_BAUDRATE

      parameter ( IE_BADID            = -1 )    ! Invalid or unsupported id
      parameter ( IE_OPEN             = -2 )    ! Device Already Open
      parameter ( IE_NOPEN            = -3 )    ! Device Not Open
      parameter ( IE_MEMORY           = -4 )    ! Unable to allocate queues
      parameter ( IE_DEFAULT          = -5 )    ! Error in default parameters
      parameter ( IE_HARDWARE         = -10 )   ! Hardware Not Present
      parameter ( IE_BYTESIZE         = -11 )   ! Illegal Byte Size
      parameter ( IE_BAUDRATE         = -12 )   ! Unsupported BaudRate

      integer NOPARITY
      integer ODDPARITY
      integer EVENPARITY
      integer MARKPARITY
      integer SPACEPARITY

      integer ONESTOPBIT
      integer ONE5STOPBITS
      integer TWOSTOPBITS

      integer IGNORE
      integer INFINITE

      parameter ( NOPARITY            = 0 )
      parameter ( ODDPARITY           = 1 )
      parameter ( EVENPARITY          = 2 )
      parameter ( MARKPARITY          = 3 )
      parameter ( SPACEPARITY         = 4 )

      parameter ( ONESTOPBIT          = 0 )
      parameter ( ONE5STOPBITS        = 1 )
      parameter ( TWOSTOPBITS         = 2 )

      parameter ( IGNORE              = 0 )       ! Ignore signal
      parameter ( INFINITE            = 'FFFF'x ) ! Infinite timeout

      integer LPTx
      parameter ( LPTx                = '80'x )  ! Set if ID is for LPT device

      structure /DCB/
          integer*1             Id              ! Internal Device ID
          integer*2             BaudRate        ! Baudrate at which runing
          integer*1             ByteSize        ! Number of bits/byte, 4-8
          integer*1             Parity          ! 0-4=None,Odd,Even,Mark,Space
          integer*1             StopBits        ! 0,1,2 = 1, 1.5, 2
          integer*2             RlsTimeout      ! Timeout for RLSD to be set
          integer*2             CtsTimeout      ! Timeout for CTS to be set
          integer*2             DsrTimeout      ! Timeout for DSR to be set
          integer*1             flags_1         ! flags field 1
          integer*1             flags_2         ! flags field 2
          integer*1             XonChar         ! Tx and Rx X-ON character
          integer*1             XoffChar        ! Tx and Rx X-OFF character
          integer*2             XonLim          ! Transmit X-ON threshold
          integer*2             XoffLim         ! Transmit X-OFF threshold
          integer*1             PeChar          ! Parity error replacement char
          integer*1             EofChar         ! End of Input character
          integer*1             EvtChar         ! Recieved Event character
          integer*2             TxDelay         ! Amount of time between chars
      end structure

! Bit definitions for "flags_1" field in DBC
! Use IBSET/IBCLR intrinsic functions to set/clear a bit

      integer fBinary
      integer fRtsDisable
      integer fParity
      integer fOutxCtsFlow
      integer fOutxDsrFlow
      integer fDtrDisable

      parameter ( fBinary        = '01'x )       ! Binary Mode (skip EOF check
      parameter ( fRtsDisable    = '02'x )       ! Don't assert RTS at init time
      parameter ( fParity        = '04'x )       ! Enable parity checking
      parameter ( fOutxCtsFlow   = '08'x )       ! CTS handshaking on output
      parameter ( fOutxDsrFlow   = '10'x )       ! DSR handshaking on output
      parameter ( fDtrDisable    = '80'x )       ! Don't assert DTR at init time

! Bit definitions for "flags_2" field in DBC
! Use IBSET/IBCLR intrinsic functions to set/clear a bit

      integer fOutX
      integer fInX
      integer fPeChar
      integer fNull
      integer fChEvt
      integer fDtrflow
      integer fRtsflow

      parameter ( fOutX         = '01'x )       ! Enable output X-ON/X-OFF
      parameter ( fInX          = '02'x )       ! Enable input X-ON/X-OFF
      parameter ( fPeChar       = '04'x )       ! Enable Parity Err Replacement
      parameter ( fNull         = '08'x )       ! Enable Null stripping
      parameter ( fChEvt        = '10'x )       ! Enable Rx character event
      parameter ( fDtrflow      = '20'x )       ! DTR handshake on input
      parameter ( fRtsflow      = '40'x )       ! RTS handshake on input

      structure /COMSTAT/
          integer*1             flags         ! flags
          integer*2             cbInQue       ! count of characters in Rx Queue
          integer*2             cbOutQue      ! count of characters in Tx Queue
      end structure

! Bit definitions for "flags" field in COMSTAT
! Use IBSET/IBCLR intrinsic functions to set/clear a bit

      integer fCtsHold
      integer fDsrHold
      integer fRlsdHold
      integer fXoffHold
      integer fXoffSent
      integer fEof
      integer fTxim

      parameter ( fCtsHold       = '01'x )   ! Transmit is on CTS hold
      parameter ( fDsrHold       = '02'x )   ! Transmit is on DSR hold
      parameter ( fRlsdHold      = '04'x )   ! Transmit is on RLSD hold
      parameter ( fXoffHold      = '08'x )   ! Received handshake
      parameter ( fXoffSent      = '10'x )   ! Issued handshake
      parameter ( fEof           = '20'x )   ! End of file character found
      parameter ( fTxim          = '40'x )   ! Character being transmitted

*$reference