ioctl.h
来自「开放源码的编译器open watcom 1.6.0版的源代码」· C头文件 代码 · 共 184 行
H
184 行
/**** from <asm/ioctl.h> ****/
/*
* The original linux ioctl numbering scheme was just a general
* "anything goes" setup, where more or less random numbers were
* assigned. Sorry, I was clueless when I started out on this.
*
* On the alpha, we'll try to clean it up a bit, using a more sane
* ioctl numbering, and also trying to be compatible with OSF/1 in
* the process. I'd like to clean it up for the i386 as well, but
* it's so painful recognizing both the new and the old numbers..
*
* The same applies for for the MIPS ABI; in fact even the macros
* from Linux/Alpha fit almost perfectly.
*/
#define _IOC_NRBITS 8
#define _IOC_TYPEBITS 8
#define _IOC_SIZEBITS 13
#define _IOC_DIRBITS 3
#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1)
#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1)
#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1)
#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1)
#define _IOC_NRSHIFT 0
#define _IOC_TYPESHIFT (_IOC_NRSHIFT+_IOC_NRBITS)
#define _IOC_SIZESHIFT (_IOC_TYPESHIFT+_IOC_TYPEBITS)
#define _IOC_DIRSHIFT (_IOC_SIZESHIFT+_IOC_SIZEBITS)
/*
* We to additionally limit parameters to a maximum 255 bytes.
*/
#define _IOC_SLMASK 0xff
/*
* Direction bits _IOC_NONE could be 0, but OSF/1 gives it a bit.
* And this turns out useful to catch old ioctl numbers in header
* files for us.
*/
#define _IOC_NONE 1U
#define _IOC_READ 2U
#define _IOC_WRITE 4U
/*
* The following are included for compatibility
*/
#define _IOC_VOID 0x20000000
#define _IOC_OUT 0x40000000
#define _IOC_IN 0x80000000
#define _IOC_INOUT (IOC_IN|IOC_OUT)
#define _IOC(dir,type,nr,size) \
(((dir) << _IOC_DIRSHIFT) | \
((type) << _IOC_TYPESHIFT) | \
((nr) << _IOC_NRSHIFT) | \
((size) << _IOC_SIZESHIFT))
/* provoke compile error for invalid uses of size argument */
extern unsigned int __invalid_size_argument_for_IOC;
#define _IOC_TYPECHECK(t) \
((sizeof(t) == sizeof(t[1]) && \
sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
sizeof(t) : __invalid_size_argument_for_IOC)
/* used to create numbers */
#define _IO(type,nr) _IOC(_IOC_NONE,(type),(nr),0)
#define _IOR(type,nr,size) _IOC(_IOC_READ,(type),(nr),(_IOC_TYPECHECK(size)))
#define _IOW(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
#define _IOR_BAD(type,nr,size) _IOC(_IOC_READ,(type),(nr),sizeof(size))
#define _IOW_BAD(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),sizeof(size))
#define _IOWR_BAD(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
/* used to decode them.. */
#define _IOC_DIR(nr) (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
#define _IOC_SIZE(nr) (((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
/* ...and for the drivers/sound files... */
#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT)
#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT)
#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
#define IOCSIZE_MASK (_IOC_SIZEMASK << _IOC_SIZESHIFT)
#define IOCSIZE_SHIFT (_IOC_SIZESHIFT)
/**** From <asm/ioctls.h> ****/
#define TCGETA 0x5401
#define TCSETA 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
#define TCSETAW 0x5403
#define TCSETAF 0x5404
#define TCSBRK 0x5405
#define TCXONC 0x5406
#define TCFLSH 0x5407
#define TCGETS 0x540d
#define TCSETS 0x540e
#define TCSETSW 0x540f
#define TCSETSF 0x5410
#define TIOCEXCL 0x740d /* set exclusive use of tty */
#define TIOCNXCL 0x740e /* reset exclusive use of tty */
#define TIOCOUTQ 0x7472 /* output queue size */
#define TIOCSTI 0x5472 /* simulate terminal input */
#define TIOCMGET 0x741d /* get all modem bits */
#define TIOCMBIS 0x741b /* bis modem bits */
#define TIOCMBIC 0x741c /* bic modem bits */
#define TIOCMSET 0x741a /* set all modem bits */
#define TIOCPKT 0x5470 /* pty: set/clear packet mode */
#define TIOCPKT_DATA 0x00 /* data packet */
#define TIOCPKT_FLUSHREAD 0x01 /* flush packet */
#define TIOCPKT_FLUSHWRITE 0x02 /* flush packet */
#define TIOCPKT_STOP 0x04 /* stop output */
#define TIOCPKT_START 0x08 /* start output */
#define TIOCPKT_NOSTOP 0x10 /* no more ^S, ^Q */
#define TIOCPKT_DOSTOP 0x20 /* now do ^S ^Q */
/* #define TIOCPKT_IOCTL 0x40 state change of pty driver */
#define TIOCSWINSZ _IOW('t', 103, struct winsize) /* set window size */
#define TIOCGWINSZ _IOR('t', 104, struct winsize) /* get window size */
#define TIOCNOTTY 0x5471 /* void tty association */
#define TIOCSETD 0x7401
#define TIOCGETD 0x7400
#define FIOCLEX 0x6601
#define FIONCLEX 0x6602
#define FIOASYNC 0x667d
#define FIONBIO 0x667e
#define FIOQSIZE 0x667f
#define TIOCGLTC 0x7474 /* get special local chars */
#define TIOCSLTC 0x7475 /* set special local chars */
#define TIOCSPGRP _IOW('t', 118, int) /* set pgrp of tty */
#define TIOCGPGRP _IOR('t', 119, int) /* get pgrp of tty */
#define TIOCCONS _IOW('t', 120, int) /* become virtual console */
#define FIONREAD 0x467f
#define TIOCINQ FIONREAD
#define TIOCGETP 0x7408
#define TIOCSETP 0x7409
#define TIOCSETN 0x740a /* TIOCSETP wo flush */
/* #define TIOCSETA _IOW('t', 20, struct termios) set termios struct */
/* #define TIOCSETAW _IOW('t', 21, struct termios) drain output, set */
/* #define TIOCSETAF _IOW('t', 22, struct termios) drn out, fls in, set */
/* #define TIOCGETD _IOR('t', 26, int) get line discipline */
/* #define TIOCSETD _IOW('t', 27, int) set line discipline */
/* 127-124 compat */
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x7416 /* Return the session ID of FD */
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
/* I hope the range from 0x5480 on is free ... */
#define TIOCSCTTY 0x5480 /* become controlling tty */
#define TIOCGSOFTCAR 0x5481
#define TIOCSSOFTCAR 0x5482
#define TIOCLINUX 0x5483
#define TIOCGSERIAL 0x5484
#define TIOCSSERIAL 0x5485
#define TCSBRKP 0x5486 /* Needed for POSIX tcsendbreak() */
#define TIOCSERCONFIG 0x5488
#define TIOCSERGWILD 0x5489
#define TIOCSERSWILD 0x548a
#define TIOCGLCKTRMIOS 0x548b
#define TIOCSLCKTRMIOS 0x548c
#define TIOCSERGSTRUCT 0x548d /* For debugging only */
#define TIOCSERGETLSR 0x548e /* Get line status register */
#define TIOCSERGETMULTI 0x548f /* Get multiport config */
#define TIOCSERSETMULTI 0x5490 /* Set multiport config */
#define TIOCMIWAIT 0x5491 /* wait for a change on serial input line(s) */
#define TIOCGICOUNT 0x5492 /* read serial port inline interrupt counts */
#define TIOCGHAYESESP 0x5493 /* Get Hayes ESP configuration */
#define TIOCSHAYESESP 0x5494 /* Set Hayes ESP configuration */
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?